BugLink: https://bugs.launchpad.net/bugs/2081278
[ Upstream commit b2f11c6f3e1fc60742673b8675c95b78447f3dae ]
If we need to increase the tree depth, allocate a new node, and then
race with another thread that increased the tree depth before us, we'll
still have a preallocated node that might be used later.
If we then use that node for a new non-root node, it'll still have a
pointer to the old root instead of being zeroed - fix this by zeroing it
in the cmpxchg failure path.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2080595
commit e1be43d9b5d0d1310dbd90185a8e5c7145dde40f upstream.
In order to perform more open-coded replacements of common allocation
size arithmetic, the kernel needs saturating (SIZE_MAX) helpers for
multiplication, addition, and subtraction. For example, it is common in
allocators, especially on realloc, to add to an existing size:
p = krealloc(map->patch,
sizeof(struct reg_sequence) * (map->patch_regs + num_regs),
GFP_KERNEL);
There is no existing saturating replacement for this calculation, and
just leaving the addition open coded inside array_size() could
potentially overflow as well. For example, an overflow in an expression
for a size_t argument might wrap to zero:
array_size(anything, something_at_size_max + 1) == 0
Introduce size_mul(), size_add(), and size_sub() helpers that
implicitly promote arguments to size_t and saturated calculations for
use in allocations. With these helpers it is also possible to redefine
array_size(), array3_size(), flex_array_size(), and struct_size() in
terms of the new helpers.
As with the check_*_overflow() helpers, the new helpers use __must_check,
though what is really desired is a way to make sure that assignment is
only to a size_t lvalue. Without this, it's still possible to introduce
overflow/underflow via type conversion (i.e. from size_t to int).
Enforcing this will currently need to be left to static analysis or
future use of -Wconversion.
Additionally update the overflow unit tests to force runtime evaluation
for the pathological cases.
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Keith Busch <kbusch@kernel.org>
Cc: Len Baker <len.baker@gmx.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2080595
commit a37fbe666c016fd89e4460d0ebfcea05baba46dc upstream.
The number of times yet another open coded
`BITS_TO_LONGS(nbits) * sizeof(long)` can be spotted is huge.
Some generic helper is long overdue.
Add one, bitmap_size(), but with one detail.
BITS_TO_LONGS() uses DIV_ROUND_UP(). The latter works well when both
divident and divisor are compile-time constants or when the divisor
is not a pow-of-2. When it is however, the compilers sometimes tend
to generate suboptimal code (GCC 13):
48 83 c0 3f add $0x3f,%rax
48 c1 e8 06 shr $0x6,%rax
48 8d 14 c5 00 00 00 00 lea 0x0(,%rax,8),%rdx
%BITS_PER_LONG is always a pow-2 (either 32 or 64), but GCC still does
full division of `nbits + 63` by it and then multiplication by 8.
Instead of BITS_TO_LONGS(), use ALIGN() and then divide by 8. GCC:
8d 50 3f lea 0x3f(%rax),%edx
c1 ea 03 shr $0x3,%edx
81 e2 f8 ff ff 1f and $0x1ffffff8,%edx
Now it shifts `nbits + 63` by 3 positions (IOW performs fast division
by 8) and then masks bits[2:0]. bloat-o-meter:
add/remove: 0/0 grow/shrink: 20/133 up/down: 156/-773 (-617)
Clang does it better and generates the same code before/after starting
from -O1, except that with the ALIGN() approach it uses %edx and thus
still saves some bytes:
add/remove: 0/0 grow/shrink: 9/133 up/down: 18/-538 (-520)
Note that we can't expand DIV_ROUND_UP() by adding a check and using
this approach there, as it's used in array declarations where
expressions are not allowed.
Add this helper to tools/ as well.
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Acked-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2078388
commit dd6e9894b451e7c85cceb8e9dc5432679a70e7dc upstream.
zap_modalias_env() wrongly calculates size of memory block to move, so
will cause OOB memory access issue if variable MODALIAS is not the last
one within its @env parameter, fixed by correcting size to memmove.
Fixes: 9b3fa47d4a ("kobject: fix suppressing modalias in uevents delivered over netlink")
Cc: stable@vger.kernel.org
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Reviewed-by: Lk Sii <lk_sii@163.com>
Link: https://lore.kernel.org/r/1717074877-11352-1-git-send-email-quic_zijuhu@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2078388
commit bf6acd5d16057d7accbbb1bf7dc6d8c56eeb4ecc upstream.
The decompression code parses a huffman tree and counts the number of
symbols for a given bit length. In rare cases, there may be >= 256
symbols with a given bit length, causing the unsigned char to overflow.
This causes a decompression failure later when the code tries and fails to
find the bit length for a given symbol.
Since the maximum number of symbols is 258, use unsigned short instead.
Link: https://lkml.kernel.org/r/20240717162016.1514077-1-ross.lagerwall@citrix.com
Fixes: bc22c17e12 ("bzip2/lzma: library support for gzip, bzip2 and lzma decompression")
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Cc: Alain Knaff <alain@knaff.lu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2078388
[ Upstream commit 97d833ceb27dc19f8777d63f90be4a27b5daeedf ]
ACLs in Spectrum-2 and newer ASICs can reside in the algorithmic TCAM
(A-TCAM) or in the ordinary circuit TCAM (C-TCAM). The former can
contain more ACLs (i.e., tc filters), but the number of masks in each
region (i.e., tc chain) is limited.
In order to mitigate the effects of the above limitation, the device
allows filters to share a single mask if their masks only differ in up
to 8 consecutive bits. For example, dst_ip/25 can be represented using
dst_ip/24 with a delta of 1 bit. The C-TCAM does not have a limit on the
number of masks being used (and therefore does not support mask
aggregation), but can contain a limited number of filters.
The driver uses the "objagg" library to perform the mask aggregation by
passing it objects that consist of the filter's mask and whether the
filter is to be inserted into the A-TCAM or the C-TCAM since filters in
different TCAMs cannot share a mask.
The set of created objects is dependent on the insertion order of the
filters and is not necessarily optimal. Therefore, the driver will
periodically ask the library to compute a more optimal set ("hints") by
looking at all the existing objects.
When the library asks the driver whether two objects can be aggregated
the driver only compares the provided masks and ignores the A-TCAM /
C-TCAM indication. This is the right thing to do since the goal is to
move as many filters as possible to the A-TCAM. The driver also forbids
two identical masks from being aggregated since this can only happen if
one was intentionally put in the C-TCAM to avoid a conflict in the
A-TCAM.
The above can result in the following set of hints:
H1: {mask X, A-TCAM} -> H2: {mask Y, A-TCAM} // X is Y + delta
H3: {mask Y, C-TCAM} -> H4: {mask Z, A-TCAM} // Y is Z + delta
After getting the hints from the library the driver will start migrating
filters from one region to another while consulting the computed hints
and instructing the device to perform a lookup in both regions during
the transition.
Assuming a filter with mask X is being migrated into the A-TCAM in the
new region, the hints lookup will return H1. Since H2 is the parent of
H1, the library will try to find the object associated with it and
create it if necessary in which case another hints lookup (recursive)
will be performed. This hints lookup for {mask Y, A-TCAM} will either
return H2 or H3 since the driver passes the library an object comparison
function that ignores the A-TCAM / C-TCAM indication.
This can eventually lead to nested objects which are not supported by
the library [1].
Fix by removing the object comparison function from both the driver and
the library as the driver was the only user. That way the lookup will
only return exact matches.
I do not have a reliable reproducer that can reproduce the issue in a
timely manner, but before the fix the issue would reproduce in several
minutes and with the fix it does not reproduce in over an hour.
Note that the current usefulness of the hints is limited because they
include the C-TCAM indication and represent aggregation that cannot
actually happen. This will be addressed in net-next.
[1]
WARNING: CPU: 0 PID: 153 at lib/objagg.c:170 objagg_obj_parent_assign+0xb5/0xd0
Modules linked in:
CPU: 0 PID: 153 Comm: kworker/0:18 Not tainted 6.9.0-rc6-custom-g70fbc2c1c38b #42
Hardware name: Mellanox Technologies Ltd. MSN3700C/VMOD0008, BIOS 5.11 10/10/2018
Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work
RIP: 0010:objagg_obj_parent_assign+0xb5/0xd0
[...]
Call Trace:
<TASK>
__objagg_obj_get+0x2bb/0x580
objagg_obj_get+0xe/0x80
mlxsw_sp_acl_erp_mask_get+0xb5/0xf0
mlxsw_sp_acl_atcam_entry_add+0xe8/0x3c0
mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0
mlxsw_sp_acl_tcam_vchunk_migrate_one+0x16b/0x270
mlxsw_sp_acl_tcam_vregion_rehash_work+0xbe/0x510
process_one_work+0x151/0x370
Fixes: 9069a3817d ("lib: objagg: implement optimization hints assembly and use hints for object creation")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Tested-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2078388
[ Upstream commit b4a3a89fffcdf09702b1f161b914e52abca1894d ]
The library supports aggregation of objects into other objects only if
the parent object does not have a parent itself. That is, nesting is not
supported.
Aggregation happens in two cases: Without and with hints, where hints
are a pre-computed recommendation on how to aggregate the provided
objects.
Nesting is not possible in the first case due to a check that prevents
it, but in the second case there is no check because the assumption is
that nesting cannot happen when creating objects based on hints. The
violation of this assumption leads to various warnings and eventually to
a general protection fault [1].
Before fixing the root cause, error out when nesting happens and warn.
[1]
general protection fault, probably for non-canonical address 0xdead000000000d90: 0000 [#1] PREEMPT SMP PTI
CPU: 1 PID: 1083 Comm: kworker/1:9 Tainted: G W 6.9.0-rc6-custom-gd9b4f1cca7fb #7
Hardware name: Mellanox Technologies Ltd. MSN3700/VMOD0005, BIOS 5.11 01/06/2019
Workqueue: mlxsw_core mlxsw_sp_acl_tcam_vregion_rehash_work
RIP: 0010:mlxsw_sp_acl_erp_bf_insert+0x25/0x80
[...]
Call Trace:
<TASK>
mlxsw_sp_acl_atcam_entry_add+0x256/0x3c0
mlxsw_sp_acl_tcam_entry_create+0x5e/0xa0
mlxsw_sp_acl_tcam_vchunk_migrate_one+0x16b/0x270
mlxsw_sp_acl_tcam_vregion_rehash_work+0xbe/0x510
process_one_work+0x151/0x370
worker_thread+0x2cb/0x3e0
kthread+0xd0/0x100
ret_from_fork+0x34/0x50
ret_from_fork_asm+0x1a/0x30
</TASK>
Fixes: 9069a3817d ("lib: objagg: implement optimization hints assembly and use hints for object creation")
Reported-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Tested-by: Alexander Zubkov <green@qrator.net>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Koichiro Den <koichiro.den@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2069758
commit 00e7d3bea2ce7dac7bee1cf501fb071fd0ea8f6c upstream.
Fix a BUG_ON from 2009. Even if it looks "unreachable" (I didn't
really look), lets make sure by removing it, doing pr_err and return
-EINVAL instead.
Cc: stable <stable@kernel.org>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20240429193145.66543-2-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2064561
[ Upstream commit 843a8851e89e2e85db04caaf88d8554818319047 ]
lib/test_blackhole_dev.c sets a variable that is never read, causing
this following building warning:
lib/test_blackhole_dev.c:32:17: warning: variable 'ethh' set but not used [-Wunused-but-set-variable]
Remove the variable struct ethhdr *ethh, which is unused.
Fixes: 509e56b37c ("blackhole_dev: add a selftest")
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Portia Stephens <portia.stephens@canonical.com>
Signed-off-by: Roxana Nicolescu <roxana.nicolescu@canonical.com>
The IDA usually detects double-frees, but that detection failed to
consider the case when there are no nearby IDs allocated and so we have a
NULL bitmap rather than simply having a clear bit. Add some tests to the
test-suite to be sure we don't inadvertently reintroduce this problem.
Unfortunately they're quite noisy so include a message to disregard
the warnings.
Reported-by: Zhenghan Wang <wzhmmmmm@gmail.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
(cherry picked from commit af73483f4e8b6f5c68c9aa63257bdd929a9c194a)
CVE-2023-6915
Signed-off-by: Bethany Jamison <bethany.jamison@canonical.com>
Acked-by: Manuel Diewald <manuel.diewald@canonical.com>
Acked-by: Roxana Nicolescu <roxana.nicolescu@canonical.com>
Signed-off-by: Roxana Nicolescu <roxana.nicolescu@canonical.com>
commit 3bb2a01caa813d3a1845d378bbe4169ef280d394 upstream.
In kobject_get_path(), if kobj->name is changed between calls
get_kobj_path_length() and fill_kobj_path() and the length becomes
longer, then fill_kobj_path() will have an out-of-bounds bug.
The actual current problem occurs when the ixgbe probe.
In ixgbe_mii_bus_init(), if the length of netdev->dev.kobj.name
length becomes longer, out-of-bounds will occur.
cpu0 cpu1
ixgbe_probe
register_netdev(netdev)
netdev_register_kobject
device_add
kobject_uevent // Sending ADD events
systemd-udevd // rename netdev
dev_change_name
device_rename
kobject_rename
ixgbe_mii_bus_init |
mdiobus_register |
__mdiobus_register |
device_register |
device_add |
kobject_uevent |
kobject_get_path |
len = get_kobj_path_length // old name |
path = kzalloc(len, gfp_mask); |
kobj->name = name;
/* name length becomes
* longer
*/
fill_kobj_path /* kobj path length is
* longer than path,
* resulting in out of
* bounds when filling path
*/
This is the kasan report:
==================================================================
BUG: KASAN: slab-out-of-bounds in fill_kobj_path+0x50/0xc0
Write of size 7 at addr ff1100090573d1fd by task kworker/28:1/673
Workqueue: events work_for_cpu_fn
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x48
print_address_description.constprop.0+0x86/0x1e7
print_report+0x36/0x4f
kasan_report+0xad/0x130
kasan_check_range+0x35/0x1c0
memcpy+0x39/0x60
fill_kobj_path+0x50/0xc0
kobject_get_path+0x5a/0xc0
kobject_uevent_env+0x140/0x460
device_add+0x5c7/0x910
__mdiobus_register+0x14e/0x490
ixgbe_probe.cold+0x441/0x574 [ixgbe]
local_pci_probe+0x78/0xc0
work_for_cpu_fn+0x26/0x40
process_one_work+0x3b6/0x6a0
worker_thread+0x368/0x520
kthread+0x165/0x1a0
ret_from_fork+0x1f/0x30
This reproducer triggers that bug:
while:
do
rmmod ixgbe
sleep 0.5
modprobe ixgbe
sleep 0.5
When calling fill_kobj_path() to fill path, if the name length of
kobj becomes longer, return failure and retry. This fixes the problem.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Wang Hai <wanghai38@huawei.com>
Link: https://lore.kernel.org/r/20221220012143.52141-1-wanghai38@huawei.com
Signed-off-by: Oleksandr Tymoshenko <ovt@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
CVE-2023-45863
(cherry picked from commit 5776aeee2a604ccc03e8269713624f9c8fd318e0 linux-5.4.y)
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Acked-by: Jacob Martin <jacob.martin@canonical.com>
Acked-by: Jose Ogando <jose.ogando@canonical.com>
Acked-by: Andrei Gherzan <andrei.gherzan@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2043724
commit efb78fa86e95 ("lib/test_meminit: allocate pages up to order
MAX_ORDER") works great in kernels 6.4 and newer thanks to commit
23baf831a32c ("mm, treewide: redefine MAX_ORDER sanely"), but for older
kernels, the loop is off by one, which causes crashes when the test
runs.
Fix this up by changing "<= MAX_ORDER" "< MAX_ORDER" to allow the test
to work properly for older kernel branches.
Fixes: cbfffe51221b ("lib/test_meminit: allocate pages up to order MAX_ORDER")
Cc: Andrew Donnellan <ajd@linux.ibm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Xiaoke Wang <xkernel.wang@foxmail.com>
Cc: <stable@vger.kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2040284
[ Upstream commit 4d0fe8c52bb3029d83e323c961221156ab98680b ]
When I register a kset in the following way:
static struct kset my_kset;
kobject_set_name(&my_kset.kobj, "my_kset");
ret = kset_register(&my_kset);
A null pointer dereference exception is occurred:
[ 4453.568337] Unable to handle kernel NULL pointer dereference at \
virtual address 0000000000000028
... ...
[ 4453.810361] Call trace:
[ 4453.813062] kobject_get_ownership+0xc/0x34
[ 4453.817493] kobject_add_internal+0x98/0x274
[ 4453.822005] kset_register+0x5c/0xb4
[ 4453.825820] my_kobj_init+0x44/0x1000 [my_kset]
... ...
Because I didn't initialize my_kset.kobj.ktype.
According to the description in Documentation/core-api/kobject.rst:
- A ktype is the type of object that embeds a kobject. Every structure
that embeds a kobject needs a corresponding ktype.
So add sanity check to make sure kset->kobj.ktype is not NULL.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Link: https://lore.kernel.org/r/20230805084114.1298-2-thunder.leizhen@huaweicloud.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Roxana Nicolescu <roxana.nicolescu@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2040284
[ Upstream commit 9e47a758b70167c9301d2b44d2569f86c7796f2d ]
During NVMeTCP Authentication a controller can trigger a kernel
oops by specifying the 8192 bit Diffie Hellman group and passing
a correctly sized, but zeroed Diffie Hellamn value.
mpi_cmp_ui() was detecting this if the second parameter was 0,
but 1 is passed from dh_is_pubkey_valid(). This causes the null
pointer u->d to be dereferenced towards the end of mpi_cmp_ui()
Signed-off-by: Mark O'Donovan <shiftee@posteo.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Roxana Nicolescu <roxana.nicolescu@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2040284
commit efb78fa86e95832b78ca0ba60f3706788a818938 upstream.
test_pages() tests the page allocator by calling alloc_pages() with
different orders up to order 10.
However, different architectures and platforms support different maximum
contiguous allocation sizes. The default maximum allocation order
(MAX_ORDER) is 10, but architectures can use CONFIG_ARCH_FORCE_MAX_ORDER
to override this. On platforms where this is less than 10, test_meminit()
will blow up with a WARN(). This is expected, so let's not do that.
Replace the hardcoded "10" with the MAX_ORDER macro so that we test
allocations up to the expected platform limit.
Link: https://lkml.kernel.org/r/20230714015238.47931-1-ajd@linux.ibm.com
Fixes: 5015a300a5 ("lib: introduce test_meminit module")
Signed-off-by: Andrew Donnellan <ajd@linux.ibm.com>
Reviewed-by: Alexander Potapenko <glider@google.com>
Cc: Xiaoke Wang <xkernel.wang@foxmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Roxana Nicolescu <roxana.nicolescu@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2039440
commit d59070d1076ec5114edb67c87658aeb1d691d381 upstream.
Recent versions of clang warn about an unused variable, though older
versions saw the 'slot++' as a use and did not warn:
radix-tree.c:1136:50: error: parameter 'slot' set but not used [-Werror,-Wunused-but-set-parameter]
It's clearly not needed any more, so just remove it.
Link: https://lkml.kernel.org/r/20230811131023.2226509-1-arnd@kernel.org
Fixes: 3a08cd52c3 ("radix tree: Remove multiorder support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Rong Tao <rongtao@cestc.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com>
Signed-off-by: Roxana Nicolescu <roxana.nicolescu@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2039440
commit 382d4cd1847517ffcb1800fd462b625db7b2ebea upstream.
The gcc compiler translates on some architectures the 64-bit
__builtin_clzll() function to a call to the libgcc function __clzdi2(),
which should take a 64-bit parameter on 32- and 64-bit platforms.
But in the current kernel code, the built-in __clzdi2() function is
defined to operate (wrongly) on 32-bit parameters if BITS_PER_LONG ==
32, thus the return values on 32-bit kernels are in the range from
[0..31] instead of the expected [0..63] range.
This patch fixes the in-kernel functions __clzdi2() and __ctzdi2() to
take a 64-bit parameter on 32-bit kernels as well, thus it makes the
functions identical for 32- and 64-bit kernels.
This bug went unnoticed since kernel 3.11 for over 10 years, and here
are some possible reasons for that:
a) Some architectures have assembly instructions to count the bits and
which are used instead of calling __clzdi2(), e.g. on x86 the bsr
instruction and on ppc cntlz is used. On such architectures the
wrong __clzdi2() implementation isn't used and as such the bug has
no effect and won't be noticed.
b) Some architectures link to libgcc.a, and the in-kernel weak
functions get replaced by the correct 64-bit variants from libgcc.a.
c) __builtin_clzll() and __clzdi2() doesn't seem to be used in many
places in the kernel, and most likely only in uncritical functions,
e.g. when printing hex values via seq_put_hex_ll(). The wrong return
value will still print the correct number, but just in a wrong
formatting (e.g. with too many leading zeroes).
d) 32-bit kernels aren't used that much any longer, so they are less
tested.
A trivial testcase to verify if the currently running 32-bit kernel is
affected by the bug is to look at the output of /proc/self/maps:
Here the kernel uses a correct implementation of __clzdi2():
root@debian:~# cat /proc/self/maps
00010000-00019000 r-xp 00000000 08:05 787324 /usr/bin/cat
00019000-0001a000 rwxp 00009000 08:05 787324 /usr/bin/cat
0001a000-0003b000 rwxp 00000000 00:00 0 [heap]
f7551000-f770d000 r-xp 00000000 08:05 794765 /usr/lib/hppa-linux-gnu/libc.so.6
...
and this kernel uses the broken implementation of __clzdi2():
root@debian:~# cat /proc/self/maps
0000000010000-0000000019000 r-xp 00000000 000000008:000000005 787324 /usr/bin/cat
0000000019000-000000001a000 rwxp 000000009000 000000008:000000005 787324 /usr/bin/cat
000000001a000-000000003b000 rwxp 00000000 00:00 0 [heap]
00000000f73d1000-00000000f758d000 r-xp 00000000 000000008:000000005 794765 /usr/lib/hppa-linux-gnu/libc.so.6
...
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 4df87bb7b6 ("lib: add weak clz/ctz functions")
Cc: Chanho Min <chanho.min@lge.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org # v3.11+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com>
Signed-off-by: Roxana Nicolescu <roxana.nicolescu@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2038652
commit 7dae593cd226a0bca61201cf85ceb9335cf63682 upstream.
In a couple of situations like
name = kstrndup(buf, count, GFP_KERNEL);
if (!name)
return -ENOSPC;
the error is not actually "No space left on device", but "Out of memory".
It is semantically correct to return -ENOMEM in all failed kstrndup()
and kzalloc() cases in this driver, as it is not a problem with disk
space, but with kernel memory allocator failing allocation.
The semantically correct should be:
name = kstrndup(buf, count, GFP_KERNEL);
if (!name)
return -ENOMEM;
Cc: Dan Carpenter <error27@gmail.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: "Luis R. Rodriguez" <mcgrof@ruslug.rutgers.edu>
Cc: Scott Branden <sbranden@broadcom.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Brian Norris <briannorris@chromium.org>
Fixes: c92316bf8e ("test_firmware: add batched firmware tests")
Fixes: 0a8adf5847 ("test: add firmware_class loader test")
Fixes: 548193cba2 ("test_firmware: add support for firmware_request_platform")
Fixes: eb910947c8 ("test: firmware_class: add asynchronous request trigger")
Fixes: 061132d2b9 ("test_firmware: add test custom fallback trigger")
Fixes: 7feebfa487 ("test_firmware: add support for request_firmware_into_buf")
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Message-ID: <20230606070808.9300-1-mirsad.todorovac@alu.unizg.hr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Roxana Nicolescu <roxana.nicolescu@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2038652
commit 4acfe3dfde685a5a9eaec5555351918e2d7266a1 upstream.
Dan Carpenter spotted a race condition in a couple of situations like
these in the test_firmware driver:
static int test_dev_config_update_u8(const char *buf, size_t size, u8 *cfg)
{
u8 val;
int ret;
ret = kstrtou8(buf, 10, &val);
if (ret)
return ret;
mutex_lock(&test_fw_mutex);
*(u8 *)cfg = val;
mutex_unlock(&test_fw_mutex);
/* Always return full write size even if we didn't consume all */
return size;
}
static ssize_t config_num_requests_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
int rc;
mutex_lock(&test_fw_mutex);
if (test_fw_config->reqs) {
pr_err("Must call release_all_firmware prior to changing config\n");
rc = -EINVAL;
mutex_unlock(&test_fw_mutex);
goto out;
}
mutex_unlock(&test_fw_mutex);
rc = test_dev_config_update_u8(buf, count,
&test_fw_config->num_requests);
out:
return rc;
}
static ssize_t config_read_fw_idx_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
{
return test_dev_config_update_u8(buf, count,
&test_fw_config->read_fw_idx);
}
The function test_dev_config_update_u8() is called from both the locked
and the unlocked context, function config_num_requests_store() and
config_read_fw_idx_store() which can both be called asynchronously as
they are driver's methods, while test_dev_config_update_u8() and siblings
change their argument pointed to by u8 *cfg or similar pointer.
To avoid deadlock on test_fw_mutex, the lock is dropped before calling
test_dev_config_update_u8() and re-acquired within test_dev_config_update_u8()
itself, but alas this creates a race condition.
Having two locks wouldn't assure a race-proof mutual exclusion.
This situation is best avoided by the introduction of a new, unlocked
function __test_dev_config_update_u8() which can be called from the locked
context and reducing test_dev_config_update_u8() to:
static int test_dev_config_update_u8(const char *buf, size_t size, u8 *cfg)
{
int ret;
mutex_lock(&test_fw_mutex);
ret = __test_dev_config_update_u8(buf, size, cfg);
mutex_unlock(&test_fw_mutex);
return ret;
}
doing the locking and calling the unlocked primitive, which enables both
locked and unlocked versions without duplication of code.
The similar approach was applied to all functions called from the locked
and the unlocked context, which safely mitigates both deadlocks and race
conditions in the driver.
__test_dev_config_update_bool(), __test_dev_config_update_u8() and
__test_dev_config_update_size_t() unlocked versions of the functions
were introduced to be called from the locked contexts as a workaround
without releasing the main driver's lock and thereof causing a race
condition.
The test_dev_config_update_bool(), test_dev_config_update_u8() and
test_dev_config_update_size_t() locked versions of the functions
are being called from driver methods without the unnecessary multiplying
of the locking and unlocking code for each method, and complicating
the code with saving of the return value across lock.
Fixes: 7feebfa487 ("test_firmware: add support for request_firmware_into_buf")
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russ Weight <russell.h.weight@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Tianfei Zhang <tianfei.zhang@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-kselftest@vger.kernel.org
Cc: stable@vger.kernel.org # v5.4
Suggested-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Link: https://lore.kernel.org/r/20230509084746.48259-1-mirsad.todorovac@alu.unizg.hr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Roxana Nicolescu <roxana.nicolescu@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2034918
[ Upstream commit 6f67fbf8192da80c4db01a1800c7fceaca9cf1f9 ]
The `shift` variable which indicates the offset in the string at which
to start matching the pattern is initialized to `bm->patlen - 1`, but it
is not reset when a new block is retrieved. This means the implemen-
tation may start looking at later and later positions in each successive
block and miss occurrences of the pattern at the beginning. E.g.,
consider a HTTP packet held in a non-linear skb, where the HTTP request
line occurs in the second block:
[... 52 bytes of packet headers ...]
GET /bmtest HTTP/1.1\r\nHost: www.example.com\r\n\r\n
and the pattern is "GET /bmtest".
Once the first block comprising the packet headers has been examined,
`shift` will be pointing to somewhere near the end of the block, and so
when the second block is examined the request line at the beginning will
be missed.
Reinitialize the variable for each new block.
Fixes: 8082e4ed0a ("[LIB]: Boyer-Moore extension for textsearch infrastructure strike #2")
Link: https://bugzilla.netfilter.org/show_bug.cgi?id=1390
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
With the removal of the interrupt perturbations in previous random32
change (random32: make prandom_u32() output unpredictable), the PRNG
has become 100% deterministic again. While SipHash is expected to be
way more robust against brute force than the previous Tausworthe LFSR,
there's still the risk that whoever has even one temporary access to
the PRNG's internal state is able to predict all subsequent draws till
the next reseed (roughly every minute). This may happen through a side
channel attack or any data leak.
This patch restores the spirit of commit f227e3ec3b ("random32: update
the net random state on interrupt and activity") in that it will perturb
the internal PRNG's statee using externally collected noise, except that
it will not pick that noise from the random pool's bits nor upon
interrupt, but will rather combine a few elements along the Tx path
that are collectively hard to predict, such as dev, skb and txq
pointers, packet length and jiffies values. These ones are combined
using a single round of SipHash into a single long variable that is
mixed with the net_rand_state upon each invocation.
The operation was inlined because it produces very small and efficient
code, typically 3 xor, 2 add and 2 rol. The performance was measured
to be the same (even very slightly better) than before the switch to
SipHash; on a 6-core 12-thread Core i7-8700k equipped with a 40G NIC
(i40e), the connection rate dropped from 556k/s to 555k/s while the
SYN cookie rate grew from 5.38 Mpps to 5.45 Mpps.
Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/
Cc: George Spelvin <lkml@sdf.org>
Cc: Amit Klein <aksecurity@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: tytso@mit.edu
Cc: Florian Westphal <fw@strlen.de>
Cc: Marc Plumb <lkml.mplumb@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
CVE-2023-0597
(backported from commit 3744741ada)
[cengizcan: prandom_u32_max returns 0 without this commit]
[cengizcan: adjust header context in net/core/dev.c]
Signed-off-by: Cengiz Can <cengiz.can@canonical.com>
Acked-by: Roxana Nicolescu <roxana.nicolescu@canonical.com>
Acked-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2031121
[ Upstream commit be37bed754ed90b2655382f93f9724b3c1aae847 ]
Dan Carpenter spotted that test_fw_config->reqs will be leaked if
trigger_batched_requests_store() is called two or more times.
The same appears with trigger_batched_requests_async_store().
This bug wasn't trigger by the tests, but observed by Dan's visual
inspection of the code.
The recommended workaround was to return -EBUSY if test_fw_config->reqs
is already allocated.
Fixes: 7feebfa487 ("test_firmware: add support for request_firmware_into_buf")
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Russ Weight <russell.h.weight@intel.com>
Cc: Tianfei Zhang <tianfei.zhang@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Colin Ian King <colin.i.king@gmail.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-kselftest@vger.kernel.org
Cc: stable@vger.kernel.org # v5.4
Suggested-by: Dan Carpenter <error27@gmail.com>
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Mirsad Goran Todorovac <mirsad.todorovac@alu.unizg.hr>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20230509084746.48259-2-mirsad.todorovac@alu.unizg.hr
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Manuel Diewald <manuel.diewald@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2030818
[ Upstream commit 7c5d4801ecf0564c860033d89726b99723c55146 ]
irq_cpu_rmap_release() calls cpu_rmap_put(), which may free the rmap.
So we need to clear the pointer to our glue structure in rmap before
doing that, not after.
Fixes: 4e0473f1060a ("lib: cpu_rmap: Avoid use after free on rmap->obj array entries")
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/ZHo0vwquhOy3FaXc@decadent.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2028981
commit 8306b057a8 upstream.
Clang warns:
../lib/dynamic_debug.c:1034:24: warning: array comparison always
evaluates to false [-Wtautological-compare]
if (__start___verbose == __stop___verbose) {
^
1 warning generated.
These are not true arrays, they are linker defined symbols, which are just
addresses. Using the address of operator silences the warning and does
not change the resulting assembly with either clang/ld.lld or gcc/ld
(tested with diff + objdump -Dr).
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Jason Baron <jbaron@akamai.com>
Link: https://github.com/ClangBuiltLinux/linux/issues/894
Link: http://lkml.kernel.org/r/20200220051320.10739-1-natechancellor@gmail.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2028981
commit 3f649ab728 upstream.
Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.
In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:
git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
xargs perl -pi -e \
's/\buninitialized_var\(([^\)]+)\)/\1/g;
s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'
drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.
No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.
[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/
Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2028697
commit eb799279fb1f9c63c520fe8c1c41cb9154252db6 upstream.
syzbot is reporting a lockdep warning in fill_pool() because the allocation
from debugobjects is using GFP_ATOMIC, which is (__GFP_HIGH | __GFP_KSWAPD_RECLAIM)
and therefore tries to wake up kswapd, which acquires kswapd_wait::lock.
Since fill_pool() might be called with arbitrary locks held, fill_pool()
should not assume that acquiring kswapd_wait::lock is safe.
Use __GFP_HIGH instead and remove __GFP_NORETRY as it is pointless for
!__GFP_DIRECT_RECLAIM allocation.
Fixes: 3ac7fe5a4a ("infrastructure to debug (dynamic) objects")
Reported-by: syzbot <syzbot+fe0c72f0ccbb93786380@syzkaller.appspotmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/6577e1fa-b6ee-f2be-2414-a2b51b1c5e30@I-love.SAKURA.ne.jp
Closes: https://syzkaller.appspot.com/bug?extid=fe0c72f0ccbb93786380
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2028697
[ Upstream commit 4e0473f1060aa49621d40a113afde24818101d37 ]
When calling irq_set_affinity_notifier() with NULL at the notify
argument, it will cause freeing of the glue pointer in the
corresponding array entry but will leave the pointer in the array. A
subsequent call to free_irq_cpu_rmap() will try to free this entry again
leading to possible use after free.
Fix that by setting NULL to the array entry and checking that we have
non-zero at the array entry when iterating over the array in
free_irq_cpu_rmap().
The current code does not suffer from this since there are no cases
where irq_set_affinity_notifier(irq, NULL) (note the NULL passed for the
notify arg) is called, followed by a call to free_irq_cpu_rmap() so we
don't hit and issue. Subsequent patches in this series excersize this
flow, hence the required fix.
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Eli Cohen <elic@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2028697
[ Upstream commit 162bd18eb55adf464a0fa2b4144b8d61c75ff7c2 ]
Add return value for dim_calc_stats. This is an indication for the
caller if curr_stats was assigned by the function. Avoid using
curr_stats uninitialized over {rdma/net}_dim, when no time delta between
samples. Coverity reported this potential use of an uninitialized
variable.
Fixes: 4c4dbb4a73 ("net/mlx5e: Move dynamic interrupt coalescing code to include/linux")
Fixes: cb3c7fd4f8 ("net/mlx5e: Support adaptive RX coalescing")
Signed-off-by: Roy Novich <royno@nvidia.com>
Reviewed-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Michal Kubiak <michal.kubiak@intel.com>
Link: https://lore.kernel.org/r/20230507135743.138993-1-tariqt@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2025387
commit 0af462f19e635ad522f28981238334620881badc upstream.
The recent fix to ensure atomicity of lookup and allocation inadvertently
broke the pool refill mechanism.
Prior to that change debug_objects_activate() and debug_objecs_assert_init()
invoked debug_objecs_init() to set up the tracking object for statically
initialized objects. That's not longer the case and debug_objecs_init() is
now the only place which does pool refills.
Depending on the number of statically initialized objects this can be
enough to actually deplete the pool, which was observed by Ido via a
debugobjects OOM warning.
Restore the old behaviour by adding explicit refill opportunities to
debug_objects_activate() and debug_objecs_assert_init().
Fixes: 63a759694eed ("debugobject: Prevent init race with static objects")
Reported-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/871qk05a9d.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luke Nowakowski-Krijger <luke.nowakowskikrijger@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2025387
[ Upstream commit 63a759694eed61025713b3e14dd827c8548daadc ]
Statically initialized objects are usually not initialized via the init()
function of the subsystem. They are special cased and the subsystem
provides a function to validate whether an object which is not yet tracked
by debugobjects is statically initialized. This means the object is started
to be tracked on first use, e.g. activation.
This works perfectly fine, unless there are two concurrent operations on
that object. Schspa decoded the problem:
T0 T1
debug_object_assert_init(addr)
lock_hash_bucket()
obj = lookup_object(addr);
if (!obj) {
unlock_hash_bucket();
- > preemption
lock_subsytem_object(addr);
activate_object(addr)
lock_hash_bucket();
obj = lookup_object(addr);
if (!obj) {
unlock_hash_bucket();
if (is_static_object(addr))
init_and_track(addr);
lock_hash_bucket();
obj = lookup_object(addr);
obj->state = ACTIVATED;
unlock_hash_bucket();
subsys function modifies content of addr,
so static object detection does
not longer work.
unlock_subsytem_object(addr);
if (is_static_object(addr)) <- Fails
debugobject emits a warning and invokes the fixup function which
reinitializes the already active object in the worst case.
This race exists forever, but was never observed until mod_timer() got a
debug_object_assert_init() added which is outside of the timer base lock
held section right at the beginning of the function to cover the lockless
early exit points too.
Rework the code so that the lookup, the static object check and the
tracking object association happens atomically under the hash bucket
lock. This prevents the issue completely as all callers are serialized on
the hash bucket lock and therefore cannot observe inconsistent state.
Fixes: 3ac7fe5a4a ("infrastructure to debug (dynamic) objects")
Reported-by: syzbot+5093ba19745994288b53@syzkaller.appspotmail.com
Debugged-by: Schspa Shi <schspa@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://syzkaller.appspot.com/bug?id=22c8a5938eab640d1c6bcc0e3dc7be519d878462
Link: https://lore.kernel.org/lkml/20230303161906.831686-1-schspa@gmail.com
Link: https://lore.kernel.org/r/87zg7dzgao.ffs@tglx
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Luke Nowakowski-Krijger <luke.nowakowskikrijger@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Now that we have nested policies, we can theoretically
recurse forever parsing attributes if a (sub-)policy
refers back to a higher level one. This is a situation
that has happened in nl80211, and we've avoided it there
by not linking it.
Add some code to netlink parsing to limit recursion depth.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
CVE-2020-36691
(backported from commit 7690aa1cdf)
[yuxuan.luo: skip the 47a1494b82 commit and backport the fix commit directly
by keep the validation_data parameter and add the new depth parameter.]
Signed-off-by: Yuxuan Luo <yuxuan.luo@canonical.com>
Acked-by: Tim Gardner <tim.gardner@canonical.com>
Acked-by: Stefan Bader <stefan.bader@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2017706
[ Upstream commit 7361d1bc307b926cbca214ab67b641123c2d6357 ]
The helper mpi_read_raw_from_sgl sets the number of entries in
the SG list according to nbytes. However, if the last entry
in the SG list contains more data than nbytes, then it may overrun
the buffer because it only allocates enough memory for nbytes.
Fixes: 2d4d1eea54 ("lib/mpi: Add mpi sgl helpers")
Reported-by: Roberto Sassu <roberto.sassu@huaweicloud.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Luke Nowakowski-Krijger <luke.nowakowskikrijger@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2015909
commit 74e19ef0ff8061ef55957c3abd71614ef0f42f47 upstream.
The results of "access_ok()" can be mis-speculated. The result is that
you can end speculatively:
if (access_ok(from, size))
// Right here
even for bad from/size combinations. On first glance, it would be ideal
to just add a speculation barrier to "access_ok()" so that its results
can never be mis-speculated.
But there are lots of system calls just doing access_ok() via
"copy_to_user()" and friends (example: fstat() and friends). Those are
generally not problematic because they do not _consume_ data from
userspace other than the pointer. They are also very quick and common
system calls that should not be needlessly slowed down.
"copy_from_user()" on the other hand uses a user-controller pointer and
is frequently followed up with code that might affect caches. Take
something like this:
if (!copy_from_user(&kernelvar, uptr, size))
do_something_with(kernelvar);
If userspace passes in an evil 'uptr' that *actually* points to a kernel
addresses, and then do_something_with() has cache (or other)
side-effects, it could allow userspace to infer kernel data values.
Add a barrier to the common copy_from_user() code to prevent
mis-speculated values which happen after the copy.
Also add a stub for architectures that do not define barrier_nospec().
This makes the macro usable in generic code.
Since the barrier is now usable in generic code, the x86 #ifdef in the
BPF code can also go away.
Reported-by: Jordy Zomer <jordyzomer@google.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Daniel Borkmann <daniel@iogearbox.net> # BPF bits
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luke Nowakowski-Krijger <luke.nowakowskikrijger@canonical.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2011226
[ Upstream commit f0950402e8c76e7dcb08563f1b4e8000fbc62455 ]
Most netlink attributes are parsed and validated from
__nla_validate_parse() or validate_nla()
u16 type = nla_type(nla);
if (type == 0 || type > maxtype) {
/* error or continue */
}
@type is then used as an array index and can be used
as a Spectre v1 gadget.
array_index_nospec() can be used to prevent leaking
content of kernel memory to malicious users.
This should take care of vast majority of netlink uses,
but an audit is needed to take care of others where
validation is not yet centralized in core netlink functions.
Fixes: bfa83a9e03 ("[NETLINK]: Type-safe netlink messages/attributes interface")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230119110150.2678537-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Luke Nowakowski-Krijger <luke.nowakowskikrijger@canonical.com>
Acked-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2011226
[ Upstream commit f5fe24ef17b5fbe6db49534163e77499fb10ae8c ]
On the x86-64 architecture even a failing cmpxchg grants exclusive
access to the cacheline, making it preferable to retry the failed op
immediately instead of stalling with the pause instruction.
To illustrate the impact, below are benchmark results obtained by
running various will-it-scale tests on top of the 6.2-rc3 kernel and
Cascade Lake (2 sockets * 24 cores * 2 threads) CPU.
All results in ops/s. Note there is some variance in re-runs, but the
code is consistently faster when contention is present.
open3 ("Same file open/close"):
proc stock no-pause
1 805603 814942 (+%1)
2 1054980 1054781 (-0%)
8 1544802 1822858 (+18%)
24 1191064 2199665 (+84%)
48 851582 1469860 (+72%)
96 609481 1427170 (+134%)
fstat2 ("Same file fstat"):
proc stock no-pause
1 3013872 3047636 (+1%)
2 4284687 4400421 (+2%)
8 3257721 5530156 (+69%)
24 2239819 5466127 (+144%)
48 1701072 5256609 (+209%)
96 1269157 6649326 (+423%)
Additionally, a kernel with a private patch to help access() scalability:
access2 ("Same file access"):
proc stock patched patched
+nopause
24 2378041 2005501 5370335 (-15% / +125%)
That is, fixing the problems in access itself *reduces* scalability
after the cacheline ping-pong only happens in lockref with the pause
instruction.
Note that fstat and access benchmarks are not currently integrated into
will-it-scale, but interested parties can find them in pull requests to
said project.
Code at hand has a rather tortured history. First modification showed
up in commit d472d9d98b ("lockref: Relax in cmpxchg loop"), written
with Itanium in mind. Later it got patched up to use an arch-dependent
macro to stop doing it on s390 where it caused a significant regression.
Said macro had undergone revisions and was ultimately eliminated later,
going back to cpu_relax.
While I intended to only remove cpu_relax for x86-64, I got the
following comment from Linus:
I would actually prefer just removing it entirely and see if
somebody else hollers. You have the numbers to prove it hurts on
real hardware, and I don't think we have any numbers to the
contrary.
So I think it's better to trust the numbers and remove it as a
failure, than say "let's just remove it on x86-64 and leave
everybody else with the potentially broken code"
Additionally, Will Deacon (maintainer of the arm64 port, one of the
architectures previously benchmarked):
So, from the arm64 side of the fence, I'm perfectly happy just
removing the cpu_relax() calls from lockref.
As such, come back full circle in history and whack it altogether.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/all/CAGudoHHx0Nqg6DE70zAVA75eV-HXfWyhVMWZ-aSeOofkA_=WdA@mail.gmail.com/
Acked-by: Tony Luck <tony.luck@intel.com> # ia64
Acked-by: Nicholas Piggin <npiggin@gmail.com> # powerpc
Acked-by: Will Deacon <will@kernel.org> # arm64
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Luke Nowakowski-Krijger <luke.nowakowskikrijger@canonical.com>
Acked-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2003914
[ Upstream commit bb90d4bc7b ]
Working through a conversion to a call kmap_local_page() instead of
kmap() revealed many places where the pattern kmap/memcpy/kunmap
occurred.
Eric Biggers, Matthew Wilcox, Christoph Hellwig, Dan Williams, and Al
Viro all suggested putting this code into helper functions. Al Viro
further pointed out that these functions already existed in the iov_iter
code.[1]
Various locations for the lifted functions were considered.
Headers like mm.h or string.h seem ok but don't really portray the
functionality well. pagemap.h made some sense but is for page cache
functionality.[2]
Another alternative would be to create a new header for the promoted
memcpy functions, but it masks the fact that these are designed to copy
to/from pages using the kernel direct mappings and complicates matters
with a new header.
Placing these functions in 'highmem.h' is suboptimal especially with the
changes being proposed in the functionality of kmap. From a caller
perspective including/using 'highmem.h' implies that the functions
defined in that header are only required when highmem is in use which is
increasingly not the case with modern processors. However, highmem.h is
where all the current functions like this reside (zero_user(),
clear_highpage(), clear_user_highpage(), copy_user_highpage(), and
copy_highpage()). So it makes the most sense even though it is
distasteful for some.[3]
Lift memcpy_to_page() and memcpy_from_page() to pagemap.h.
[1] https://lore.kernel.org/lkml/20201013200149.GI3576660@ZenIV.linux.org.uk/https://lore.kernel.org/lkml/20201013112544.GA5249@infradead.org/
[2] https://lore.kernel.org/lkml/20201208122316.GH7338@casper.infradead.org/
[3] https://lore.kernel.org/lkml/20201013200149.GI3576660@ZenIV.linux.org.uk/#thttps://lore.kernel.org/lkml/20201208163814.GN1563847@iweiny-DESK2.sc.intel.com/
Cc: Boris Pismenny <borisp@mellanox.com>
Cc: Or Gerlitz <gerlitz.or@gmail.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Suggested-by: Christoph Hellwig <hch@infradead.org>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Suggested-by: Al Viro <viro@zeniv.linux.org.uk>
Suggested-by: Eric Biggers <ebiggers@kernel.org>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 956510c0c743 ("fs: ext4: initialize fsdata in pagecache_write()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2003914
[ Upstream commit f883c3edd2c432a2931ec8773c70a570115a50fe ]
The simple attribute files do not accept a negative value since the commit
488dac0c92 ("libfs: fix error cast of negative value in
simple_attr_write()").
This restores the previous behaviour by using newly introduced
DEFINE_SIMPLE_ATTRIBUTE_SIGNED instead of DEFINE_SIMPLE_ATTRIBUTE.
Link: https://lkml.kernel.org/r/20220919172418.45257-3-akinobu.mita@gmail.com
Fixes: 488dac0c92 ("libfs: fix error cast of negative value in simple_attr_write()")
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Reported-by: Zhao Gongyi <zhaogongyi@huawei.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Wei Yongjun <weiyongjun1@huawei.com>
Cc: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2003896
[ Upstream commit 152fe65f300e1819d59b80477d3e0999b4d5d7d2 ]
When enabled, KASAN enlarges function's stack-frames. Pushing quite a few
over the current threshold. This can mainly be seen on 32-bit
architectures where the present limit (when !GCC) is a lowly 1024-Bytes.
Link: https://lkml.kernel.org/r/20221125120750.3537134-3-lee@kernel.org
Signed-off-by: Lee Jones <lee@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@gmail.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2003896
[ Upstream commit 8d192bec534bd5b778135769a12e5f04580771f7 ]
PA-RISC uses a much bigger frame size for functions than other
architectures. So increase it to 2048 for 32- and 64-bit kernels.
This fixes e.g. a warning in lib/xxhash.c.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Helge Deller <deller@gmx.de>
Stable-dep-of: 152fe65f300e ("Kconfig.debug: provide a little extra FRAME_WARN leeway when KASAN is enabled")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2003896
[ Upstream commit 867050247e ]
xtensa frame size is larger than the frame size for almost all other
architectures. This results in more than 50 "the frame size of <n> is
larger than 1024 bytes" errors when trying to build xtensa:allmodconfig.
Increase frame size for xtensa to 1536 bytes to avoid compile errors due
to frame size limits.
Link: https://lkml.kernel.org/r/20210912025235.3514761-1-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: David Laight <David.Laight@ACULAB.COM>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Stable-dep-of: 152fe65f300e ("Kconfig.debug: provide a little extra FRAME_WARN leeway when KASAN is enabled")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2003896
[ Upstream commit 55b70eed81 ]
parisc uses much bigger frames than other architectures, so increase the
stack frame check value to avoid compiler warnings.
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Helge Deller <deller@gmx.de>
Stable-dep-of: 152fe65f300e ("Kconfig.debug: provide a little extra FRAME_WARN leeway when KASAN is enabled")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2003896
commit a4412fdd49dc011bcc2c0d81ac4cab7457092650 upstream.
The config to be able to inject error codes into any function annotated
with ALLOW_ERROR_INJECTION() is enabled when FUNCTION_ERROR_INJECTION is
enabled. But unfortunately, this is always enabled on x86 when KPROBES
is enabled, and there's no way to turn it off.
As kprobes is useful for observability of the kernel, it is useful to
have it enabled in production environments. But error injection should
be avoided. Add a prompt to the config to allow it to be disabled even
when kprobes is enabled, and get rid of the "def_bool y".
This is a kernel debug feature (it's in Kconfig.debug), and should have
never been something enabled by default.
Cc: stable@vger.kernel.org
Fixes: 540adea380 ("error-injection: Separate error-injection from kprobe")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/2003896
commit 8ac3b5cd3e0521d92f9755e90d140382fc292510 upstream.
The latest version of grep claims the egrep is now obsolete so the build
now contains warnings that look like:
egrep: warning: egrep is obsolescent; using grep -E
fix this up by moving the vdso Makefile to use "grep -E" instead.
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Link: https://lore.kernel.org/r/20220920170633.3133829-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
BugLink: https://bugs.launchpad.net/bugs/1996812
[ Upstream commit e75ef56f74965f426dd819a41336b640ffdd8fbc ]
dyndbg's control-parser: ddebug_parse_query(), requires that search
terms: module, func, file, lineno, are used only once in a query; a
thing cannot be named both foo and bar.
The cited commit added an overriding module modname, taken from the
module loader, which is authoritative. So it set query.module 1st,
which disallowed its use in the query-string.
But now, its useful to allow a module-load to enable classes across a
whole (or part of) a subsystem at once.
# enable (dynamic-debug in) drm only
modprobe drm dyndbg="class DRM_UT_CORE +p"
# get drm_helper too
modprobe drm dyndbg="class DRM_UT_CORE module drm* +p"
# get everything that knows DRM_UT_CORE
modprobe drm dyndbg="class DRM_UT_CORE module * +p"
# also for boot-args:
drm.dyndbg="class DRM_UT_CORE module * +p"
So convert the override into a default, by filling it only when/after
the query-string omitted the module.
NB: the query class FOO handling is forthcoming.
Fixes: 8e59b5cfb9 dynamic_debug: add modname arg to exec_query callchain
Acked-by: Jason Baron <jbaron@akamai.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jim Cromie <jim.cromie@gmail.com>
Link: https://lore.kernel.org/r/20220904214134.408619-8-jim.cromie@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Stefan Bader <stefan.bader@canonical.com>
Kent Overstreet
Kees Cook
Alexander Lobakin
Zijun Hu
Ross Lagerwall
Ido Schimmel
Jim Cromie
Andrey Ryabinin
Breno Leitao
Matthew Wilcox (Oracle)
Wang Hai
Greg Kroah-Hartman
Zhen Lei
Mark O'Donovan
Ariel Marcovitch
Andrew Donnellan
Arnd Bergmann
Helge Deller
Mirsad Goran Todorovac
Tetsuo Handa
Jeremy Sowden
Willy Tarreau
Ben Hutchings
Nathan Chancellor
Eli Cohen
Roy Novich
Thomas Gleixner
Johannes Berg
Herbert Xu
Dave Hansen
Eric Dumazet
Mateusz Guzik
Ira Weiny
Zhengchao Shao
Akinobu Mita
Gaosheng Cui
Lee Jones
Guenter Roeck
Steven Rostedt (Google)