* remove the patches that are shredding upstream device tree
* consolidation into single patch that apply over upstream dt
* add pcm5102a device tree overlay for handy usage
TI SDK supports images with real-time kernel. Add support for building
such images for the `current` release by adding a config file for it.
The RT image is built with the `current-rt` branch.
Signed-off-by: Suhaas Joshi <s-joshi@ti.com>
- BeagleBoard.org boards normally ship with USB cdc enabled to allow
network sharing and ssh support over usb.
- This is specially important for boards like pocketbeagle2 since it
does not have built-in wifi.
Signed-off-by: Ayush Singh <ayush@beagleboard.org>
Change from "y" to "m"
Before
[ 2.423992] rtc-hym8563 1-0051: no valid clock/calendar values available
[ 2.424718] rtc-hym8563 1-0051: registered as rtc0
[ 2.425770] rtc-hym8563 1-0051: no valid clock/calendar values available
[ 2.425789] rtc-hym8563 1-0051: hctosys: unable to read the hardware clock
[ 3.817166] rk808-rtc rk808-rtc.5.auto: registered as rtc1
After
[ 3.790107] rk808-rtc rk808-rtc.5.auto: registered as rtc0
[ 3.801742] rk808-rtc rk808-rtc.5.auto: setting system clock to 2017-08-05T09:48:13 UTC (1501926493)
[ 3.919628] rtc-hym8563 1-0051: registered as rtc1
Signed-off-by: Patrick Yavitz <pyavitz@gmail.com>
Enables kernel options that are important for making armbian viable for use on PocketBeagle 2.
Can now run all examples present in the beagle examples repo: https://github.com/beagleboard/vsx-examples
Signed-off-by: Ayush Singh <ayush@beagleboard.org> Andrei Aldea <andrei@beagleboard.org>
* always use http for apt repos
* pass possible proxy arguments to docker
* populate lower-case env variables with upper-case ones if not set otherwise
* correct system patch used for aliasing on Allwinner A10, A13 and A20 to ensure consistent allocation of device IDs
* Re-introduce spi overlays for each bus so that when used in conjuction with a device driver overlay, the pins are correctly muxed into SPI mode
* Ensure SPI overlay patches are applied
* Fix typo in patch name
* Move alias patches further down series.conf to ensure they are only called after the intial overlay creation
* Rephrase subject heading to improve clarity
* Fix interface aliases on Allwinner A10 for I2C, SPI and UART
* Fix interface aliases on Allwinner A13 for I2C and UART
* Fix interface aliases on Allwinner A20 for I2C, SPI and UART
* Fix SPI 2 pin names in line with latest revision of the Allwinner A10 device tree
* Fix SPI 2 pin names in line with latest revision of the Allwinner A20 device tree
* Create overlays for each bus on the Allwinner A20 so that the corresponding pins can be set into spi mode
* Create overlays for each bus on the Allwinner A10 so that the corresponding pins can be set into spi mode
* Condense alias path corrections into the intial overlay creation patch instead of applying a further patch on topof it to enact these corrections
* Remove references to our no longer needed addtional overlays
* rename to include 'arm-dts..' for consistency with other dts related patches
* Fix mistake in SPI overlay patches naming which leads to build failure
* Fix typo in application of spi2 overlay that was leading to compilation failure
* Amend the assigned aliases in overlay creation so that the kernel correctly maps the bus/port number to match the physical hardware numbering
* Update pin labels for SPI 2 to use current names as defined in sun4i-a10.dtsi and sun7i-a20.dtsi. fixed typo in sun5i-a13-spi-spidev as compatibility field should be sun5i-a13
* Re-introduce compilation of spi bus overlays on Allwinner A10 and A20 SOCs which are necessary to ensure that the pins are correctly muxed into spi mode
Muhammed Efe Cetin
Igor Pecovnik
Werner
dependabot[bot]
Rolf Leggewie
Paolo Sabatino
Suhaas Joshi
Ayush Singh
retro98boy
CaWeissWz
Patrick Yavitz
igorpecovnik
Your Name
Jack Huang
Ryzer58
The-going