Update.

1999-08-15  Ulrich Drepper  <drepper@cygnus.com>

	* localedata/locales/ca_ES: New file.
	Contributed by Joan Carles Soler <Joan.Soler@uv.es>.

	* SUPPORTED: Add ca_ES.

intl/locale.alias

@@ -26,6 +26,7 @@
 # it with the rest of us.  Send it using the `glibcbug' script to
 # bugs@gnu.org.
 
+catalan		ca_ES.ISO-8859-1
 croatian	hr_HR.ISO-8859-2
 czech		cs_CZ.ISO-8859-2
 danish          da_DK.ISO-8859-1

localedata/ChangeLog

@@ -1,3 +1,10 @@
+1999-08-15  Ulrich Drepper  <drepper@cygnus.com>
+
+	* localedata/locales/ca_ES: New file.
+	Contributed by Joan Carles Soler <Joan.Soler@uv.es>.
+
+	* SUPPORTED: Add ca_ES.
+
 1999-05-18  Ulrich Drepper  <drepper@cygnus.com>
 
 	* Makefile (LOCALEDEF): Add I18NPATH definition to find the

localedata/SUPPORTED

@@ -1,6 +1,7 @@
 # This file names the currently supported and somewhat tested locales.
 # If you have any additions please use the glibcbug script to send an
 # appropriate message.
+ca_ES ISO-8859-1
 cs_CZ ISO-8859-2
 da_DK ISO-8859-1
 de_AT ISO-8859-1

manual/install.texi

@@ -169,9 +169,10 @@ compile but use what you say instead of guessing what your system is.
 This is most useful to change the CPU submodel.  For example, if
 configure guesses your machine as @code{i586-pc-linux-gnu} but you want
 to compile a library optimized for 386es, give
-@samp{--host=i386-pc-linux-gnu} or just @samp{--host=i386-linux}.  (A
+@samp{--host=i386-pc-linux-gnu} or just @samp{--host=i386-linux} and add
-library compiled for a Pentium (@code{i586}) will still work on a 386,
+the appropriate compiler flags (@samp{-mcpu=i386} will do the trick) to
-but it may be slower.)
+@var{CFLAGS}. (A library compiled for a Pentium (@code{i586}) will still
+work on a 386, but it may be slower.)
 
 If you give just @samp{--build}, configure will get confused.
 @end table
@@ -419,11 +420,14 @@ maintainers by sending electronic mail to @email{bug-glibc@@gnu.org}.
 
 Each case of @samp{i@var{x}86} can be @samp{i386}, @samp{i486},
 @samp{i586}, or @samp{i686}.  All of those configurations produce a
-library that can run on any of these processors.  The library will be
+library that can run on any of these processors if the compiler is
-optimized for the specified processor, but will not use instructions not
+configured correctly.  The GCC compiler by default generates code
-available on all of them.  If you want the library to use instructions
+that's optimized for the machine it's configured for and will use the
-only available on newer processors, give GCC the appropriate @samp{-m}
+instructions available on that machine.  For example if your GCC is
-switches via @var{CFLAGS}.
+configured for @samp{i686}, gcc will optimize for @samp{i686} and
+might issue some @samp{i686} specific instructions.  To generate code
+for other models you should give GCC the appropriate @samp{-march=}
+and @samp{-mcpu=} compiler switches via @var{CFLAGS}.
 
 @node Linux
 @appendixsec Specific advice for Linux systems

sysdeps/generic/_G_config.h

@@ -20,6 +20,8 @@
 # define _WINT_T
 typedef unsigned int wint_t;
 #endif
+#define __need_mbstate_t
+#include <wchar.h>
 #define _G_size_t	size_t
 typedef struct
 {