linux-kernelorg-stable/include/linux/netfs.h

556 lines
21 KiB
C
Raw Normal View History

/* SPDX-License-Identifier: GPL-2.0-or-later */
/* Network filesystem support services.
*
* Copyright (C) 2021 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* See:
*
* Documentation/filesystems/netfs_library.rst
*
* for a description of the network filesystem interface declared here.
*/
#ifndef _LINUX_NETFS_H
#define _LINUX_NETFS_H
netfs: Provide readahead and readpage netfs helpers Add a pair of helper functions: (*) netfs_readahead() (*) netfs_readpage() to do the work of handling a readahead or a readpage, where the page(s) that form part of the request may be split between the local cache, the server or just require clearing, and may be single pages and transparent huge pages. This is all handled within the helper. Note that while both will read from the cache if there is data present, only netfs_readahead() will expand the request beyond what it was asked to do, and only netfs_readahead() will write back to the cache. netfs_readpage(), on the other hand, is synchronous and only fetches the page (which might be a THP) it is asked for. The netfs gives the helper parameters from the VM, the cache cookie it wants to use (or NULL) and a table of operations (only one of which is mandatory): (*) expand_readahead() [optional] Called to allow the netfs to request an expansion of a readahead request to meet its own alignment requirements. This is done by changing rreq->start and rreq->len. (*) clamp_length() [optional] Called to allow the netfs to cut down a subrequest to meet its own boundary requirements. If it does this, the helper will generate additional subrequests until the full request is satisfied. (*) is_still_valid() [optional] Called to find out if the data just read from the cache has been invalidated and must be reread from the server. (*) issue_op() [required] Called to ask the netfs to issue a read to the server. The subrequest describes the read. The read request holds information about the file being accessed. The netfs can cache information in rreq->netfs_priv. Upon completion, the netfs should set the error, transferred and can also set FSCACHE_SREQ_CLEAR_TAIL and then call fscache_subreq_terminated(). (*) done() [optional] Called after the pages have been unlocked. The read request is still pinning the file and mapping and may still be pinning pages with PG_fscache. rreq->error indicates any error that has been accumulated. (*) cleanup() [optional] Called when the helper is disposing of a finished read request. This allows the netfs to clear rreq->netfs_priv. Netfs support is enabled with CONFIG_NETFS_SUPPORT=y. It will be built even if CONFIG_FSCACHE=n and in this case much of it should be optimised away, allowing the filesystem to use it even when caching is disabled. Changes: v5: - Comment why netfs_readahead() is putting pages[2]. - Use page_file_mapping() rather than page->mapping[2]. - Use page_index() rather than page->index[2]. - Use set_page_fscache()[3] rather then SetPageFsCache() as this takes an appropriate ref too[4]. v4: - Folded in a kerneldoc comment fix. - Folded in a fix for the error handling in the case that ENOMEM occurs. - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/20210321014202.GF3420@casper.infradead.org/ [2] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/CAHk-=wh+2gbF7XEjYc=HV9w_2uVzVf7vs60BPz0gFA=+pUm3ww@mail.gmail.com/ [4] Link: https://lore.kernel.org/r/160588497406.3465195.18003475695899726222.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118136849.1232039.8923686136144228724.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161032290.2537118.13400578415247339173.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340394873.1303470.6237319335883242536.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539537375.286939.16642940088716990995.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653795430.2770958.4947584573720000554.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789076581.6155.6745849361504760209.stgit@warthog.procyon.org.uk/ # v6
2020-05-13 16:41:20 +00:00
#include <linux/workqueue.h>
#include <linux/fs.h>
#include <linux/pagemap.h>
#include <linux/uio.h>
#include <linux/rolling_buffer.h>
enum netfs_sreq_ref_trace;
typedef struct mempool_s mempool_t;
struct folio_queue;
netfs, mm: Add set/end/wait_on_page_fscache() aliases Add set/end/wait_on_page_fscache() as aliases of set/end/wait_page_private_2(). These allow a page to marked with PG_fscache, the flag to be removed and waiters woken and waiting for the flag to be cleared. A ref on the page is also taken and dropped. [Linus suggested putting the fscache-themed functions into the caching-specific headers rather than pagemap.h[1]] Changes: v5: - Mirror the changes to the core routines[2]. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Linus Torvalds <torvalds@linux-foundation.org> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/1330473.1612974547@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/CAHk-=wjgA-74ddehziVk=XAEMTKswPu1Yw4uaro1R3ibs27ztw@mail.gmail.com/ [1] Link: https://lore.kernel.org/r/161340393568.1303470.4997526899111310530.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539536093.286939.5076448803512118764.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [2] Link: https://lore.kernel.org/r/161653793873.2770958.12157243390965814502.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789075327.6155.7432127924219092385.stgit@warthog.procyon.org.uk/ # v6
2021-02-15 13:20:46 +00:00
/**
* folio_start_private_2 - Start an fscache write on a folio. [DEPRECATED]
* @folio: The folio.
netfs, mm: Add set/end/wait_on_page_fscache() aliases Add set/end/wait_on_page_fscache() as aliases of set/end/wait_page_private_2(). These allow a page to marked with PG_fscache, the flag to be removed and waiters woken and waiting for the flag to be cleared. A ref on the page is also taken and dropped. [Linus suggested putting the fscache-themed functions into the caching-specific headers rather than pagemap.h[1]] Changes: v5: - Mirror the changes to the core routines[2]. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Linus Torvalds <torvalds@linux-foundation.org> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/1330473.1612974547@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/CAHk-=wjgA-74ddehziVk=XAEMTKswPu1Yw4uaro1R3ibs27ztw@mail.gmail.com/ [1] Link: https://lore.kernel.org/r/161340393568.1303470.4997526899111310530.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539536093.286939.5076448803512118764.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [2] Link: https://lore.kernel.org/r/161653793873.2770958.12157243390965814502.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789075327.6155.7432127924219092385.stgit@warthog.procyon.org.uk/ # v6
2021-02-15 13:20:46 +00:00
*
* Call this function before writing a folio to a local cache. Starting a
* second write before the first one finishes is not allowed.
*
* Note that this should no longer be used.
netfs, mm: Add set/end/wait_on_page_fscache() aliases Add set/end/wait_on_page_fscache() as aliases of set/end/wait_page_private_2(). These allow a page to marked with PG_fscache, the flag to be removed and waiters woken and waiting for the flag to be cleared. A ref on the page is also taken and dropped. [Linus suggested putting the fscache-themed functions into the caching-specific headers rather than pagemap.h[1]] Changes: v5: - Mirror the changes to the core routines[2]. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Linus Torvalds <torvalds@linux-foundation.org> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/1330473.1612974547@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/CAHk-=wjgA-74ddehziVk=XAEMTKswPu1Yw4uaro1R3ibs27ztw@mail.gmail.com/ [1] Link: https://lore.kernel.org/r/161340393568.1303470.4997526899111310530.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539536093.286939.5076448803512118764.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [2] Link: https://lore.kernel.org/r/161653793873.2770958.12157243390965814502.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789075327.6155.7432127924219092385.stgit@warthog.procyon.org.uk/ # v6
2021-02-15 13:20:46 +00:00
*/
static inline void folio_start_private_2(struct folio *folio)
netfs, mm: Add set/end/wait_on_page_fscache() aliases Add set/end/wait_on_page_fscache() as aliases of set/end/wait_page_private_2(). These allow a page to marked with PG_fscache, the flag to be removed and waiters woken and waiting for the flag to be cleared. A ref on the page is also taken and dropped. [Linus suggested putting the fscache-themed functions into the caching-specific headers rather than pagemap.h[1]] Changes: v5: - Mirror the changes to the core routines[2]. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Linus Torvalds <torvalds@linux-foundation.org> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/1330473.1612974547@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/CAHk-=wjgA-74ddehziVk=XAEMTKswPu1Yw4uaro1R3ibs27ztw@mail.gmail.com/ [1] Link: https://lore.kernel.org/r/161340393568.1303470.4997526899111310530.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539536093.286939.5076448803512118764.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [2] Link: https://lore.kernel.org/r/161653793873.2770958.12157243390965814502.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789075327.6155.7432127924219092385.stgit@warthog.procyon.org.uk/ # v6
2021-02-15 13:20:46 +00:00
{
VM_BUG_ON_FOLIO(folio_test_private_2(folio), folio);
folio_get(folio);
folio_set_private_2(folio);
netfs, mm: Add set/end/wait_on_page_fscache() aliases Add set/end/wait_on_page_fscache() as aliases of set/end/wait_page_private_2(). These allow a page to marked with PG_fscache, the flag to be removed and waiters woken and waiting for the flag to be cleared. A ref on the page is also taken and dropped. [Linus suggested putting the fscache-themed functions into the caching-specific headers rather than pagemap.h[1]] Changes: v5: - Mirror the changes to the core routines[2]. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Linus Torvalds <torvalds@linux-foundation.org> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/1330473.1612974547@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/CAHk-=wjgA-74ddehziVk=XAEMTKswPu1Yw4uaro1R3ibs27ztw@mail.gmail.com/ [1] Link: https://lore.kernel.org/r/161340393568.1303470.4997526899111310530.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539536093.286939.5076448803512118764.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [2] Link: https://lore.kernel.org/r/161653793873.2770958.12157243390965814502.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789075327.6155.7432127924219092385.stgit@warthog.procyon.org.uk/ # v6
2021-02-15 13:20:46 +00:00
}
enum netfs_io_source {
NETFS_SOURCE_UNKNOWN,
netfs: Provide readahead and readpage netfs helpers Add a pair of helper functions: (*) netfs_readahead() (*) netfs_readpage() to do the work of handling a readahead or a readpage, where the page(s) that form part of the request may be split between the local cache, the server or just require clearing, and may be single pages and transparent huge pages. This is all handled within the helper. Note that while both will read from the cache if there is data present, only netfs_readahead() will expand the request beyond what it was asked to do, and only netfs_readahead() will write back to the cache. netfs_readpage(), on the other hand, is synchronous and only fetches the page (which might be a THP) it is asked for. The netfs gives the helper parameters from the VM, the cache cookie it wants to use (or NULL) and a table of operations (only one of which is mandatory): (*) expand_readahead() [optional] Called to allow the netfs to request an expansion of a readahead request to meet its own alignment requirements. This is done by changing rreq->start and rreq->len. (*) clamp_length() [optional] Called to allow the netfs to cut down a subrequest to meet its own boundary requirements. If it does this, the helper will generate additional subrequests until the full request is satisfied. (*) is_still_valid() [optional] Called to find out if the data just read from the cache has been invalidated and must be reread from the server. (*) issue_op() [required] Called to ask the netfs to issue a read to the server. The subrequest describes the read. The read request holds information about the file being accessed. The netfs can cache information in rreq->netfs_priv. Upon completion, the netfs should set the error, transferred and can also set FSCACHE_SREQ_CLEAR_TAIL and then call fscache_subreq_terminated(). (*) done() [optional] Called after the pages have been unlocked. The read request is still pinning the file and mapping and may still be pinning pages with PG_fscache. rreq->error indicates any error that has been accumulated. (*) cleanup() [optional] Called when the helper is disposing of a finished read request. This allows the netfs to clear rreq->netfs_priv. Netfs support is enabled with CONFIG_NETFS_SUPPORT=y. It will be built even if CONFIG_FSCACHE=n and in this case much of it should be optimised away, allowing the filesystem to use it even when caching is disabled. Changes: v5: - Comment why netfs_readahead() is putting pages[2]. - Use page_file_mapping() rather than page->mapping[2]. - Use page_index() rather than page->index[2]. - Use set_page_fscache()[3] rather then SetPageFsCache() as this takes an appropriate ref too[4]. v4: - Folded in a kerneldoc comment fix. - Folded in a fix for the error handling in the case that ENOMEM occurs. - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/20210321014202.GF3420@casper.infradead.org/ [2] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/CAHk-=wh+2gbF7XEjYc=HV9w_2uVzVf7vs60BPz0gFA=+pUm3ww@mail.gmail.com/ [4] Link: https://lore.kernel.org/r/160588497406.3465195.18003475695899726222.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118136849.1232039.8923686136144228724.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161032290.2537118.13400578415247339173.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340394873.1303470.6237319335883242536.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539537375.286939.16642940088716990995.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653795430.2770958.4947584573720000554.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789076581.6155.6745849361504760209.stgit@warthog.procyon.org.uk/ # v6
2020-05-13 16:41:20 +00:00
NETFS_FILL_WITH_ZEROES,
NETFS_DOWNLOAD_FROM_SERVER,
NETFS_READ_FROM_CACHE,
NETFS_INVALID_READ,
NETFS_UPLOAD_TO_SERVER,
NETFS_WRITE_TO_CACHE,
netfs: Provide readahead and readpage netfs helpers Add a pair of helper functions: (*) netfs_readahead() (*) netfs_readpage() to do the work of handling a readahead or a readpage, where the page(s) that form part of the request may be split between the local cache, the server or just require clearing, and may be single pages and transparent huge pages. This is all handled within the helper. Note that while both will read from the cache if there is data present, only netfs_readahead() will expand the request beyond what it was asked to do, and only netfs_readahead() will write back to the cache. netfs_readpage(), on the other hand, is synchronous and only fetches the page (which might be a THP) it is asked for. The netfs gives the helper parameters from the VM, the cache cookie it wants to use (or NULL) and a table of operations (only one of which is mandatory): (*) expand_readahead() [optional] Called to allow the netfs to request an expansion of a readahead request to meet its own alignment requirements. This is done by changing rreq->start and rreq->len. (*) clamp_length() [optional] Called to allow the netfs to cut down a subrequest to meet its own boundary requirements. If it does this, the helper will generate additional subrequests until the full request is satisfied. (*) is_still_valid() [optional] Called to find out if the data just read from the cache has been invalidated and must be reread from the server. (*) issue_op() [required] Called to ask the netfs to issue a read to the server. The subrequest describes the read. The read request holds information about the file being accessed. The netfs can cache information in rreq->netfs_priv. Upon completion, the netfs should set the error, transferred and can also set FSCACHE_SREQ_CLEAR_TAIL and then call fscache_subreq_terminated(). (*) done() [optional] Called after the pages have been unlocked. The read request is still pinning the file and mapping and may still be pinning pages with PG_fscache. rreq->error indicates any error that has been accumulated. (*) cleanup() [optional] Called when the helper is disposing of a finished read request. This allows the netfs to clear rreq->netfs_priv. Netfs support is enabled with CONFIG_NETFS_SUPPORT=y. It will be built even if CONFIG_FSCACHE=n and in this case much of it should be optimised away, allowing the filesystem to use it even when caching is disabled. Changes: v5: - Comment why netfs_readahead() is putting pages[2]. - Use page_file_mapping() rather than page->mapping[2]. - Use page_index() rather than page->index[2]. - Use set_page_fscache()[3] rather then SetPageFsCache() as this takes an appropriate ref too[4]. v4: - Folded in a kerneldoc comment fix. - Folded in a fix for the error handling in the case that ENOMEM occurs. - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/20210321014202.GF3420@casper.infradead.org/ [2] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/CAHk-=wh+2gbF7XEjYc=HV9w_2uVzVf7vs60BPz0gFA=+pUm3ww@mail.gmail.com/ [4] Link: https://lore.kernel.org/r/160588497406.3465195.18003475695899726222.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118136849.1232039.8923686136144228724.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161032290.2537118.13400578415247339173.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340394873.1303470.6237319335883242536.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539537375.286939.16642940088716990995.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653795430.2770958.4947584573720000554.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789076581.6155.6745849361504760209.stgit@warthog.procyon.org.uk/ # v6
2020-05-13 16:41:20 +00:00
} __mode(byte);
netfs: Fix the request's work item to not require a ref When the netfs_io_request struct's work item is queued, it must be supplied with a ref to the work item struct to prevent it being deallocated whilst on the queue or whilst it is being processed. This is tricky to manage as we have to get a ref before we try and queue it and then we may find it's already queued and is thus already holding a ref - in which case we have to try and get rid of the ref again. The problem comes if we're in BH or IRQ context and need to drop the ref: if netfs_put_request() reduces the count to 0, we have to do the cleanup - but the cleanup may need to wait. Fix this by adding a new work item to the request, ->cleanup_work, and dispatching that when the refcount hits zero. That can then synchronously cancel any outstanding work on the main work item before doing the cleanup. Adding a new work item also deals with another problem upstream where it's sometimes changing the work func in the put function and requeuing it - which has occasionally in the past caused the cleanup to happen incorrectly. As a bonus, this allows us to get rid of the 'was_async' parameter from a bunch of functions. This indicated whether the put function might not be permitted to sleep. Fixes: 3d3c95046742 ("netfs: Provide readahead and readpage netfs helpers") Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/20250519090707.2848510-4-dhowells@redhat.com cc: Paulo Alcantara <pc@manguebit.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Steve French <stfrench@microsoft.com> cc: linux-cifs@vger.kernel.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-05-19 09:07:03 +00:00
typedef void (*netfs_io_terminated_t)(void *priv, ssize_t transferred_or_error);
netfs: Define an interface to talk to a cache Add an interface to the netfs helper library for reading data from the cache instead of downloading it from the server and support for writing data just downloaded or cleared to the cache. The API passes an iov_iter to the cache read/write routines to indicate the data/buffer to be used. This is done using the ITER_XARRAY type to provide direct access to the netfs inode's pagecache. When the netfs's ->begin_cache_operation() method is called, this must fill in the cache_resources in the netfs_read_request struct, including the netfs_cache_ops used by the helper lib to talk to the cache. The helper lib does not directly access the cache. Changes: v6: - Call trace_netfs_read() after beginning the cache op so that the cookie debug ID can be logged[3]. - Don't record the error from writing to the cache. We don't want to pass it back to the netfs[4]. - Fix copy-to-cache subreq amalgamation to not round up as it goes along otherwise it overcalculates the length of the write[5]. v5: - Use end_page_fscache() rather than unlock_page_fscache()[2]. v4: - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). - Add missing inc of netfs_n_rh_read stat. - Move initial definition of fscache_begin_read_operation() elsewhere. - Need to call op->begin_cache_operation() from netfs_write_begin(). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [2] Link: https://lore.kernel.org/r/161781045123.463527.14533348855710902201.stgit@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/161781046256.463527.18158681600085556192.stgit@warthog.procyon.org.uk/ [4] Link: https://lore.kernel.org/r/161781047695.463527.7463536103593997492.stgit@warthog.procyon.org.uk/ [5] Link: https://lore.kernel.org/r/161118141321.1232039.8296910406755622458.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161036700.2537118.11170748455436854978.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340399569.1303470.1138884774643385730.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539542874.286939.13337898213448136687.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653799826.2770958.9015430297426331950.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789081462.6155.3853904866933313256.stgit@warthog.procyon.org.uk/ # v6
2020-02-06 14:22:24 +00:00
netfs: Add a netfs inode context Add a netfs_i_context struct that should be included in the network filesystem's own inode struct wrapper, directly after the VFS's inode struct, e.g.: struct my_inode { struct { /* These must be contiguous */ struct inode vfs_inode; struct netfs_i_context netfs_ctx; }; }; The netfs_i_context struct so far contains a single field for the network filesystem to use - the cache cookie: struct netfs_i_context { ... struct fscache_cookie *cache; }; Three functions are provided to help with this: (1) void netfs_i_context_init(struct inode *inode, const struct netfs_request_ops *ops); Initialise the netfs context and set the operations. (2) struct netfs_i_context *netfs_i_context(struct inode *inode); Find the netfs context from the VFS inode. (3) struct inode *netfs_inode(struct netfs_i_context *ctx); Find the VFS inode from the netfs context. Changes ======= ver #4) - Fix netfs_is_cache_enabled() to check cookie->cache_priv to see if a cache is present[3]. - Fix netfs_skip_folio_read() to zero out all of the page, not just some of it[3]. ver #3) - Split out the bit to move ceph cap-getting on readahead into ceph_init_request()[1]. - Stick in a comment to the netfs inode structs indicating the contiguity requirements[2]. ver #2) - Adjust documentation to match. - Use "#if IS_ENABLED()" in netfs_i_cookie(), not "#ifdef". - Move the cap check from ceph_readahead() to ceph_init_request() to be called from netfslib. - Remove ceph_readahead() and use netfs_readahead() directly instead. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com Link: https://lore.kernel.org/r/8af0d47f17d89c06bbf602496dd845f2b0bf25b3.camel@kernel.org/ [1] Link: https://lore.kernel.org/r/beaf4f6a6c2575ed489adb14b257253c868f9a5c.camel@kernel.org/ [2] Link: https://lore.kernel.org/r/3536452.1647421585@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/164622984545.3564931.15691742939278418580.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/164678213320.1200972.16807551936267647470.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/164692909854.2099075.9535537286264248057.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/306388.1647595110@warthog.procyon.org.uk/ # v4
2021-06-29 21:37:05 +00:00
/*
netfs: Fix gcc-12 warning by embedding vfs inode in netfs_i_context While randstruct was satisfied with using an open-coded "void *" offset cast for the netfs_i_context <-> inode casting, __builtin_object_size() as used by FORTIFY_SOURCE was not as easily fooled. This was causing the following complaint[1] from gcc v12: In file included from include/linux/string.h:253, from include/linux/ceph/ceph_debug.h:7, from fs/ceph/inode.c:2: In function 'fortify_memset_chk', inlined from 'netfs_i_context_init' at include/linux/netfs.h:326:2, inlined from 'ceph_alloc_inode' at fs/ceph/inode.c:463:2: include/linux/fortify-string.h:242:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning] 242 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix this by embedding a struct inode into struct netfs_i_context (which should perhaps be renamed to struct netfs_inode). The struct inode vfs_inode fields are then removed from the 9p, afs, ceph and cifs inode structs and vfs_inode is then simply changed to "netfs.inode" in those filesystems. Further, rename netfs_i_context to netfs_inode, get rid of the netfs_inode() function that converted a netfs_i_context pointer to an inode pointer (that can now be done with &ctx->inode) and rename the netfs_i_context() function to netfs_inode() (which is now a wrapper around container_of()). Most of the changes were done with: perl -p -i -e 's/vfs_inode/netfs.inode/'g \ `git grep -l 'vfs_inode' -- fs/{9p,afs,ceph,cifs}/*.[ch]` Kees suggested doing it with a pair structure[2] and a special declarator to insert that into the network filesystem's inode wrapper[3], but I think it's cleaner to embed it - and then it doesn't matter if struct randomisation reorders things. Dave Chinner suggested using a filesystem-specific VFS_I() function in each filesystem to convert that filesystem's own inode wrapper struct into the VFS inode struct[4]. Version #2: - Fix a couple of missed name changes due to a disabled cifs option. - Rename nfs_i_context to nfs_inode - Use "netfs" instead of "nic" as the member name in per-fs inode wrapper structs. [ This also undoes commit 507160f46c55 ("netfs: gcc-12: temporarily disable '-Wattribute-warning' for now") that is no longer needed ] Fixes: bc899ee1c898 ("netfs: Add a netfs inode context") Reported-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> cc: Jonathan Corbet <corbet@lwn.net> cc: Eric Van Hensbergen <ericvh@gmail.com> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Ilya Dryomov <idryomov@gmail.com> cc: Steve French <smfrench@gmail.com> cc: William Kucharski <william.kucharski@oracle.com> cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> cc: Dave Chinner <david@fromorbit.com> cc: linux-doc@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-afs@lists.infradead.org cc: ceph-devel@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: samba-technical@lists.samba.org cc: linux-fsdevel@vger.kernel.org cc: linux-hardening@vger.kernel.org Link: https://lore.kernel.org/r/d2ad3a3d7bdd794c6efb562d2f2b655fb67756b9.camel@kernel.org/ [1] Link: https://lore.kernel.org/r/20220517210230.864239-1-keescook@chromium.org/ [2] Link: https://lore.kernel.org/r/20220518202212.2322058-1-keescook@chromium.org/ [3] Link: https://lore.kernel.org/r/20220524101205.GI2306852@dread.disaster.area/ [4] Link: https://lore.kernel.org/r/165296786831.3591209.12111293034669289733.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/165305805651.4094995.7763502506786714216.stgit@warthog.procyon.org.uk # v2 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-06-09 20:46:04 +00:00
* Per-inode context. This wraps the VFS inode.
netfs: Add a netfs inode context Add a netfs_i_context struct that should be included in the network filesystem's own inode struct wrapper, directly after the VFS's inode struct, e.g.: struct my_inode { struct { /* These must be contiguous */ struct inode vfs_inode; struct netfs_i_context netfs_ctx; }; }; The netfs_i_context struct so far contains a single field for the network filesystem to use - the cache cookie: struct netfs_i_context { ... struct fscache_cookie *cache; }; Three functions are provided to help with this: (1) void netfs_i_context_init(struct inode *inode, const struct netfs_request_ops *ops); Initialise the netfs context and set the operations. (2) struct netfs_i_context *netfs_i_context(struct inode *inode); Find the netfs context from the VFS inode. (3) struct inode *netfs_inode(struct netfs_i_context *ctx); Find the VFS inode from the netfs context. Changes ======= ver #4) - Fix netfs_is_cache_enabled() to check cookie->cache_priv to see if a cache is present[3]. - Fix netfs_skip_folio_read() to zero out all of the page, not just some of it[3]. ver #3) - Split out the bit to move ceph cap-getting on readahead into ceph_init_request()[1]. - Stick in a comment to the netfs inode structs indicating the contiguity requirements[2]. ver #2) - Adjust documentation to match. - Use "#if IS_ENABLED()" in netfs_i_cookie(), not "#ifdef". - Move the cap check from ceph_readahead() to ceph_init_request() to be called from netfslib. - Remove ceph_readahead() and use netfs_readahead() directly instead. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com Link: https://lore.kernel.org/r/8af0d47f17d89c06bbf602496dd845f2b0bf25b3.camel@kernel.org/ [1] Link: https://lore.kernel.org/r/beaf4f6a6c2575ed489adb14b257253c868f9a5c.camel@kernel.org/ [2] Link: https://lore.kernel.org/r/3536452.1647421585@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/164622984545.3564931.15691742939278418580.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/164678213320.1200972.16807551936267647470.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/164692909854.2099075.9535537286264248057.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/306388.1647595110@warthog.procyon.org.uk/ # v4
2021-06-29 21:37:05 +00:00
*/
netfs: Fix gcc-12 warning by embedding vfs inode in netfs_i_context While randstruct was satisfied with using an open-coded "void *" offset cast for the netfs_i_context <-> inode casting, __builtin_object_size() as used by FORTIFY_SOURCE was not as easily fooled. This was causing the following complaint[1] from gcc v12: In file included from include/linux/string.h:253, from include/linux/ceph/ceph_debug.h:7, from fs/ceph/inode.c:2: In function 'fortify_memset_chk', inlined from 'netfs_i_context_init' at include/linux/netfs.h:326:2, inlined from 'ceph_alloc_inode' at fs/ceph/inode.c:463:2: include/linux/fortify-string.h:242:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning] 242 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix this by embedding a struct inode into struct netfs_i_context (which should perhaps be renamed to struct netfs_inode). The struct inode vfs_inode fields are then removed from the 9p, afs, ceph and cifs inode structs and vfs_inode is then simply changed to "netfs.inode" in those filesystems. Further, rename netfs_i_context to netfs_inode, get rid of the netfs_inode() function that converted a netfs_i_context pointer to an inode pointer (that can now be done with &ctx->inode) and rename the netfs_i_context() function to netfs_inode() (which is now a wrapper around container_of()). Most of the changes were done with: perl -p -i -e 's/vfs_inode/netfs.inode/'g \ `git grep -l 'vfs_inode' -- fs/{9p,afs,ceph,cifs}/*.[ch]` Kees suggested doing it with a pair structure[2] and a special declarator to insert that into the network filesystem's inode wrapper[3], but I think it's cleaner to embed it - and then it doesn't matter if struct randomisation reorders things. Dave Chinner suggested using a filesystem-specific VFS_I() function in each filesystem to convert that filesystem's own inode wrapper struct into the VFS inode struct[4]. Version #2: - Fix a couple of missed name changes due to a disabled cifs option. - Rename nfs_i_context to nfs_inode - Use "netfs" instead of "nic" as the member name in per-fs inode wrapper structs. [ This also undoes commit 507160f46c55 ("netfs: gcc-12: temporarily disable '-Wattribute-warning' for now") that is no longer needed ] Fixes: bc899ee1c898 ("netfs: Add a netfs inode context") Reported-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> cc: Jonathan Corbet <corbet@lwn.net> cc: Eric Van Hensbergen <ericvh@gmail.com> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Ilya Dryomov <idryomov@gmail.com> cc: Steve French <smfrench@gmail.com> cc: William Kucharski <william.kucharski@oracle.com> cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> cc: Dave Chinner <david@fromorbit.com> cc: linux-doc@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-afs@lists.infradead.org cc: ceph-devel@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: samba-technical@lists.samba.org cc: linux-fsdevel@vger.kernel.org cc: linux-hardening@vger.kernel.org Link: https://lore.kernel.org/r/d2ad3a3d7bdd794c6efb562d2f2b655fb67756b9.camel@kernel.org/ [1] Link: https://lore.kernel.org/r/20220517210230.864239-1-keescook@chromium.org/ [2] Link: https://lore.kernel.org/r/20220518202212.2322058-1-keescook@chromium.org/ [3] Link: https://lore.kernel.org/r/20220524101205.GI2306852@dread.disaster.area/ [4] Link: https://lore.kernel.org/r/165296786831.3591209.12111293034669289733.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/165305805651.4094995.7763502506786714216.stgit@warthog.procyon.org.uk # v2 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-06-09 20:46:04 +00:00
struct netfs_inode {
struct inode inode; /* The VFS inode */
netfs: Add a netfs inode context Add a netfs_i_context struct that should be included in the network filesystem's own inode struct wrapper, directly after the VFS's inode struct, e.g.: struct my_inode { struct { /* These must be contiguous */ struct inode vfs_inode; struct netfs_i_context netfs_ctx; }; }; The netfs_i_context struct so far contains a single field for the network filesystem to use - the cache cookie: struct netfs_i_context { ... struct fscache_cookie *cache; }; Three functions are provided to help with this: (1) void netfs_i_context_init(struct inode *inode, const struct netfs_request_ops *ops); Initialise the netfs context and set the operations. (2) struct netfs_i_context *netfs_i_context(struct inode *inode); Find the netfs context from the VFS inode. (3) struct inode *netfs_inode(struct netfs_i_context *ctx); Find the VFS inode from the netfs context. Changes ======= ver #4) - Fix netfs_is_cache_enabled() to check cookie->cache_priv to see if a cache is present[3]. - Fix netfs_skip_folio_read() to zero out all of the page, not just some of it[3]. ver #3) - Split out the bit to move ceph cap-getting on readahead into ceph_init_request()[1]. - Stick in a comment to the netfs inode structs indicating the contiguity requirements[2]. ver #2) - Adjust documentation to match. - Use "#if IS_ENABLED()" in netfs_i_cookie(), not "#ifdef". - Move the cap check from ceph_readahead() to ceph_init_request() to be called from netfslib. - Remove ceph_readahead() and use netfs_readahead() directly instead. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com Link: https://lore.kernel.org/r/8af0d47f17d89c06bbf602496dd845f2b0bf25b3.camel@kernel.org/ [1] Link: https://lore.kernel.org/r/beaf4f6a6c2575ed489adb14b257253c868f9a5c.camel@kernel.org/ [2] Link: https://lore.kernel.org/r/3536452.1647421585@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/164622984545.3564931.15691742939278418580.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/164678213320.1200972.16807551936267647470.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/164692909854.2099075.9535537286264248057.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/306388.1647595110@warthog.procyon.org.uk/ # v4
2021-06-29 21:37:05 +00:00
const struct netfs_request_ops *ops;
#if IS_ENABLED(CONFIG_FSCACHE)
struct fscache_cookie *cache;
#endif
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
struct mutex wb_lock; /* Writeback serialisation */
loff_t remote_i_size; /* Size of the remote file */
netfs: Optimise away reads above the point at which there can be no data Track the file position above which the server is not expected to have any data (the "zero point") and preemptively assume that we can satisfy requests by filling them with zeroes locally rather than attempting to download them if they're over that line - even if we've written data back to the server. Assume that any data that was written back above that position is held in the local cache. Note that we have to split requests that straddle the line. Make use of this to optimise away some reads from the server. We need to set the zero point in the following circumstances: (1) When we see an extant remote inode and have no cache for it, we set the zero_point to i_size. (2) On local inode creation, we set zero_point to 0. (3) On local truncation down, we reduce zero_point to the new i_size if the new i_size is lower. (4) On local truncation up, we don't change zero_point. (5) On local modification, we don't change zero_point. (6) On remote invalidation, we set zero_point to the new i_size. (7) If stored data is discarded from the pagecache or culled from fscache, we must set zero_point above that if the data also got written to the server. (8) If dirty data is written back to the server, but not fscache, we must set zero_point above that. (9) If a direct I/O write is made, set zero_point above that. Assuming the above, any read from the server at or above the zero_point position will return all zeroes. The zero_point value can be stored in the cache, provided the above rules are applied to it by any code that culls part of the local cache. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org cc: linux-mm@kvack.org
2023-11-24 13:39:02 +00:00
loff_t zero_point; /* Size after which we assume there's no data
* on the server */
netfs, 9p: Fix race between umount and async request completion There's a problem in 9p's interaction with netfslib whereby a crash occurs because the 9p_fid structs get forcibly destroyed during client teardown (without paying attention to their refcounts) before netfslib has finished with them. However, it's not a simple case of deferring the clunking that p9_fid_put() does as that requires the p9_client record to still be present. The problem is that netfslib has to unlock pages and clear the IN_PROGRESS flag before destroying the objects involved - including the fid - and, in any case, nothing checks to see if writeback completed barring looking at the page flags. Fix this by keeping a count of outstanding I/O requests (of any type) and waiting for it to quiesce during inode eviction. Reported-by: syzbot+df038d463cca332e8414@syzkaller.appspotmail.com Link: https://lore.kernel.org/all/0000000000005be0aa061846f8d6@google.com/ Reported-by: syzbot+d7c7a495a5e466c031b6@syzkaller.appspotmail.com Link: https://lore.kernel.org/all/000000000000b86c5e06130da9c6@google.com/ Reported-by: syzbot+1527696d41a634cc1819@syzkaller.appspotmail.com Link: https://lore.kernel.org/all/000000000000041f960618206d7e@google.com/ Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/755891.1716560771@warthog.procyon.org.uk Tested-by: syzbot+d7c7a495a5e466c031b6@syzkaller.appspotmail.com Reviewed-by: Dominique Martinet <asmadeus@codewreck.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Jeff Layton <jlayton@kernel.org> cc: Steve French <sfrench@samba.org> cc: Hillf Danton <hdanton@sina.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: linux-cifs@vger.kernel.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Reported-and-tested-by: syzbot+d7c7a495a5e466c031b6@syzkaller.appspotmail.com Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-05-24 14:26:11 +00:00
atomic_t io_count; /* Number of outstanding reqs */
unsigned long flags;
#define NETFS_ICTX_ODIRECT 0 /* The file has DIO in progress */
#define NETFS_ICTX_UNBUFFERED 1 /* I/O should not use the pagecache */
#define NETFS_ICTX_MODIFIED_ATTR 3 /* Indicate change in mtime/ctime */
#define NETFS_ICTX_SINGLE_NO_UPLOAD 4 /* Monolithic payload, cache but no upload */
netfs: Add a netfs inode context Add a netfs_i_context struct that should be included in the network filesystem's own inode struct wrapper, directly after the VFS's inode struct, e.g.: struct my_inode { struct { /* These must be contiguous */ struct inode vfs_inode; struct netfs_i_context netfs_ctx; }; }; The netfs_i_context struct so far contains a single field for the network filesystem to use - the cache cookie: struct netfs_i_context { ... struct fscache_cookie *cache; }; Three functions are provided to help with this: (1) void netfs_i_context_init(struct inode *inode, const struct netfs_request_ops *ops); Initialise the netfs context and set the operations. (2) struct netfs_i_context *netfs_i_context(struct inode *inode); Find the netfs context from the VFS inode. (3) struct inode *netfs_inode(struct netfs_i_context *ctx); Find the VFS inode from the netfs context. Changes ======= ver #4) - Fix netfs_is_cache_enabled() to check cookie->cache_priv to see if a cache is present[3]. - Fix netfs_skip_folio_read() to zero out all of the page, not just some of it[3]. ver #3) - Split out the bit to move ceph cap-getting on readahead into ceph_init_request()[1]. - Stick in a comment to the netfs inode structs indicating the contiguity requirements[2]. ver #2) - Adjust documentation to match. - Use "#if IS_ENABLED()" in netfs_i_cookie(), not "#ifdef". - Move the cap check from ceph_readahead() to ceph_init_request() to be called from netfslib. - Remove ceph_readahead() and use netfs_readahead() directly instead. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com Link: https://lore.kernel.org/r/8af0d47f17d89c06bbf602496dd845f2b0bf25b3.camel@kernel.org/ [1] Link: https://lore.kernel.org/r/beaf4f6a6c2575ed489adb14b257253c868f9a5c.camel@kernel.org/ [2] Link: https://lore.kernel.org/r/3536452.1647421585@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/164622984545.3564931.15691742939278418580.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/164678213320.1200972.16807551936267647470.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/164692909854.2099075.9535537286264248057.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/306388.1647595110@warthog.procyon.org.uk/ # v4
2021-06-29 21:37:05 +00:00
};
/*
* A netfs group - for instance a ceph snap. This is marked on dirty pages and
* pages marked with a group must be flushed before they can be written under
* the domain of another group.
*/
struct netfs_group {
refcount_t ref;
void (*free)(struct netfs_group *netfs_group);
};
/*
* Information about a dirty page (attached only if necessary).
* folio->private
*/
struct netfs_folio {
struct netfs_group *netfs_group; /* Filesystem's grouping marker (or NULL). */
unsigned int dirty_offset; /* Write-streaming dirty data offset */
unsigned int dirty_len; /* Write-streaming dirty data length */
};
#define NETFS_FOLIO_INFO 0x1UL /* OR'd with folio->private. */
netfs: Replace PG_fscache by setting folio->private and marking dirty When dirty data is being written to the cache, setting/waiting on/clearing the fscache flag is always done in tandem with setting/waiting on/clearing the writeback flag. The netfslib buffered write routines wait on and set both flags and the write request cleanup clears both flags, so the fscache flag is almost superfluous. The reason it isn't superfluous is because the fscache flag is also used to indicate that data just read from the server is being written to the cache. The flag is used to prevent a race involving overlapping direct-I/O writes to the cache. Change this to indicate that a page is in need of being copied to the cache by placing a magic value in folio->private and marking the folios dirty. Then when the writeback code sees a folio marked in this way, it only writes it to the cache and not to the server. If a folio that has this magic value set is modified, the value is just replaced and the folio will then be uplodaded too. With this, PG_fscache is no longer required by the netfslib core, 9p and afs. Ceph and nfs, however, still need to use the old PG_fscache-based tracking. To deal with this, a flag, NETFS_ICTX_USE_PGPRIV2, now has to be set on the flags in the netfs_inode struct for those filesystems. This reenables the use of PG_fscache in that inode. 9p and afs use the netfslib write helpers so get switched over; cifs, for the moment, does page-by-page manual access to the cache, so doesn't use PG_fscache and is unaffected. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Matthew Wilcox (Oracle) <willy@infradead.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Ilya Dryomov <idryomov@gmail.com> cc: Xiubo Li <xiubli@redhat.com> cc: Steve French <sfrench@samba.org> cc: Paulo Alcantara <pc@manguebit.com> cc: Ronnie Sahlberg <ronniesahlberg@gmail.com> cc: Shyam Prasad N <sprasad@microsoft.com> cc: Tom Talpey <tom@talpey.com> cc: Bharath SM <bharathsm@microsoft.com> cc: Trond Myklebust <trond.myklebust@hammerspace.com> cc: Anna Schumaker <anna@kernel.org> cc: netfs@lists.linux.dev cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: ceph-devel@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: linux-nfs@vger.kernel.org cc: linux-fsdevel@vger.kernel.org cc: linux-mm@kvack.org
2024-03-19 10:00:09 +00:00
#define NETFS_FOLIO_COPY_TO_CACHE ((struct netfs_group *)0x356UL) /* Write to the cache only */
netfs: Replace PG_fscache by setting folio->private and marking dirty When dirty data is being written to the cache, setting/waiting on/clearing the fscache flag is always done in tandem with setting/waiting on/clearing the writeback flag. The netfslib buffered write routines wait on and set both flags and the write request cleanup clears both flags, so the fscache flag is almost superfluous. The reason it isn't superfluous is because the fscache flag is also used to indicate that data just read from the server is being written to the cache. The flag is used to prevent a race involving overlapping direct-I/O writes to the cache. Change this to indicate that a page is in need of being copied to the cache by placing a magic value in folio->private and marking the folios dirty. Then when the writeback code sees a folio marked in this way, it only writes it to the cache and not to the server. If a folio that has this magic value set is modified, the value is just replaced and the folio will then be uplodaded too. With this, PG_fscache is no longer required by the netfslib core, 9p and afs. Ceph and nfs, however, still need to use the old PG_fscache-based tracking. To deal with this, a flag, NETFS_ICTX_USE_PGPRIV2, now has to be set on the flags in the netfs_inode struct for those filesystems. This reenables the use of PG_fscache in that inode. 9p and afs use the netfslib write helpers so get switched over; cifs, for the moment, does page-by-page manual access to the cache, so doesn't use PG_fscache and is unaffected. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Matthew Wilcox (Oracle) <willy@infradead.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Ilya Dryomov <idryomov@gmail.com> cc: Xiubo Li <xiubli@redhat.com> cc: Steve French <sfrench@samba.org> cc: Paulo Alcantara <pc@manguebit.com> cc: Ronnie Sahlberg <ronniesahlberg@gmail.com> cc: Shyam Prasad N <sprasad@microsoft.com> cc: Tom Talpey <tom@talpey.com> cc: Bharath SM <bharathsm@microsoft.com> cc: Trond Myklebust <trond.myklebust@hammerspace.com> cc: Anna Schumaker <anna@kernel.org> cc: netfs@lists.linux.dev cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: ceph-devel@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: linux-nfs@vger.kernel.org cc: linux-fsdevel@vger.kernel.org cc: linux-mm@kvack.org
2024-03-19 10:00:09 +00:00
static inline bool netfs_is_folio_info(const void *priv)
{
netfs: Replace PG_fscache by setting folio->private and marking dirty When dirty data is being written to the cache, setting/waiting on/clearing the fscache flag is always done in tandem with setting/waiting on/clearing the writeback flag. The netfslib buffered write routines wait on and set both flags and the write request cleanup clears both flags, so the fscache flag is almost superfluous. The reason it isn't superfluous is because the fscache flag is also used to indicate that data just read from the server is being written to the cache. The flag is used to prevent a race involving overlapping direct-I/O writes to the cache. Change this to indicate that a page is in need of being copied to the cache by placing a magic value in folio->private and marking the folios dirty. Then when the writeback code sees a folio marked in this way, it only writes it to the cache and not to the server. If a folio that has this magic value set is modified, the value is just replaced and the folio will then be uplodaded too. With this, PG_fscache is no longer required by the netfslib core, 9p and afs. Ceph and nfs, however, still need to use the old PG_fscache-based tracking. To deal with this, a flag, NETFS_ICTX_USE_PGPRIV2, now has to be set on the flags in the netfs_inode struct for those filesystems. This reenables the use of PG_fscache in that inode. 9p and afs use the netfslib write helpers so get switched over; cifs, for the moment, does page-by-page manual access to the cache, so doesn't use PG_fscache and is unaffected. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Matthew Wilcox (Oracle) <willy@infradead.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Ilya Dryomov <idryomov@gmail.com> cc: Xiubo Li <xiubli@redhat.com> cc: Steve French <sfrench@samba.org> cc: Paulo Alcantara <pc@manguebit.com> cc: Ronnie Sahlberg <ronniesahlberg@gmail.com> cc: Shyam Prasad N <sprasad@microsoft.com> cc: Tom Talpey <tom@talpey.com> cc: Bharath SM <bharathsm@microsoft.com> cc: Trond Myklebust <trond.myklebust@hammerspace.com> cc: Anna Schumaker <anna@kernel.org> cc: netfs@lists.linux.dev cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: ceph-devel@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: linux-nfs@vger.kernel.org cc: linux-fsdevel@vger.kernel.org cc: linux-mm@kvack.org
2024-03-19 10:00:09 +00:00
return (unsigned long)priv & NETFS_FOLIO_INFO;
}
netfs: Replace PG_fscache by setting folio->private and marking dirty When dirty data is being written to the cache, setting/waiting on/clearing the fscache flag is always done in tandem with setting/waiting on/clearing the writeback flag. The netfslib buffered write routines wait on and set both flags and the write request cleanup clears both flags, so the fscache flag is almost superfluous. The reason it isn't superfluous is because the fscache flag is also used to indicate that data just read from the server is being written to the cache. The flag is used to prevent a race involving overlapping direct-I/O writes to the cache. Change this to indicate that a page is in need of being copied to the cache by placing a magic value in folio->private and marking the folios dirty. Then when the writeback code sees a folio marked in this way, it only writes it to the cache and not to the server. If a folio that has this magic value set is modified, the value is just replaced and the folio will then be uplodaded too. With this, PG_fscache is no longer required by the netfslib core, 9p and afs. Ceph and nfs, however, still need to use the old PG_fscache-based tracking. To deal with this, a flag, NETFS_ICTX_USE_PGPRIV2, now has to be set on the flags in the netfs_inode struct for those filesystems. This reenables the use of PG_fscache in that inode. 9p and afs use the netfslib write helpers so get switched over; cifs, for the moment, does page-by-page manual access to the cache, so doesn't use PG_fscache and is unaffected. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Matthew Wilcox (Oracle) <willy@infradead.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Ilya Dryomov <idryomov@gmail.com> cc: Xiubo Li <xiubli@redhat.com> cc: Steve French <sfrench@samba.org> cc: Paulo Alcantara <pc@manguebit.com> cc: Ronnie Sahlberg <ronniesahlberg@gmail.com> cc: Shyam Prasad N <sprasad@microsoft.com> cc: Tom Talpey <tom@talpey.com> cc: Bharath SM <bharathsm@microsoft.com> cc: Trond Myklebust <trond.myklebust@hammerspace.com> cc: Anna Schumaker <anna@kernel.org> cc: netfs@lists.linux.dev cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: ceph-devel@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: linux-nfs@vger.kernel.org cc: linux-fsdevel@vger.kernel.org cc: linux-mm@kvack.org
2024-03-19 10:00:09 +00:00
static inline struct netfs_folio *__netfs_folio_info(const void *priv)
{
if (netfs_is_folio_info(priv))
return (struct netfs_folio *)((unsigned long)priv & ~NETFS_FOLIO_INFO);
return NULL;
}
netfs: Replace PG_fscache by setting folio->private and marking dirty When dirty data is being written to the cache, setting/waiting on/clearing the fscache flag is always done in tandem with setting/waiting on/clearing the writeback flag. The netfslib buffered write routines wait on and set both flags and the write request cleanup clears both flags, so the fscache flag is almost superfluous. The reason it isn't superfluous is because the fscache flag is also used to indicate that data just read from the server is being written to the cache. The flag is used to prevent a race involving overlapping direct-I/O writes to the cache. Change this to indicate that a page is in need of being copied to the cache by placing a magic value in folio->private and marking the folios dirty. Then when the writeback code sees a folio marked in this way, it only writes it to the cache and not to the server. If a folio that has this magic value set is modified, the value is just replaced and the folio will then be uplodaded too. With this, PG_fscache is no longer required by the netfslib core, 9p and afs. Ceph and nfs, however, still need to use the old PG_fscache-based tracking. To deal with this, a flag, NETFS_ICTX_USE_PGPRIV2, now has to be set on the flags in the netfs_inode struct for those filesystems. This reenables the use of PG_fscache in that inode. 9p and afs use the netfslib write helpers so get switched over; cifs, for the moment, does page-by-page manual access to the cache, so doesn't use PG_fscache and is unaffected. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Matthew Wilcox (Oracle) <willy@infradead.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Ilya Dryomov <idryomov@gmail.com> cc: Xiubo Li <xiubli@redhat.com> cc: Steve French <sfrench@samba.org> cc: Paulo Alcantara <pc@manguebit.com> cc: Ronnie Sahlberg <ronniesahlberg@gmail.com> cc: Shyam Prasad N <sprasad@microsoft.com> cc: Tom Talpey <tom@talpey.com> cc: Bharath SM <bharathsm@microsoft.com> cc: Trond Myklebust <trond.myklebust@hammerspace.com> cc: Anna Schumaker <anna@kernel.org> cc: netfs@lists.linux.dev cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: ceph-devel@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: linux-nfs@vger.kernel.org cc: linux-fsdevel@vger.kernel.org cc: linux-mm@kvack.org
2024-03-19 10:00:09 +00:00
static inline struct netfs_folio *netfs_folio_info(struct folio *folio)
{
return __netfs_folio_info(folio_get_private(folio));
}
static inline struct netfs_group *netfs_folio_group(struct folio *folio)
{
struct netfs_folio *finfo;
void *priv = folio_get_private(folio);
finfo = netfs_folio_info(folio);
if (finfo)
return finfo->netfs_group;
return priv;
}
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
/*
* Stream of I/O subrequests going to a particular destination, such as the
* server or the local cache. This is mainly intended for writing where we may
* have to write to multiple destinations concurrently.
*/
struct netfs_io_stream {
/* Submission tracking */
struct netfs_io_subrequest *construct; /* Op being constructed */
size_t sreq_max_len; /* Maximum size of a subrequest */
unsigned int sreq_max_segs; /* 0 or max number of segments in an iterator */
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
unsigned int submit_off; /* Folio offset we're submitting from */
unsigned int submit_len; /* Amount of data left to submit */
cachefiles, netfs: Fix write to partial block at EOF Because it uses DIO writes, cachefiles is unable to make a write to the backing file if that write is not aligned to and sized according to the backing file's DIO block alignment. This makes it tricky to handle a write to the cache where the EOF on the network file is not correctly aligned. To get around this, netfslib attempts to tell the driver it is calling how much more data there is available beyond the EOF that it can use to pad the write (netfslib preclears the part of the folio above the EOF). However, it tries to tell the cache what the maximum length is, but doesn't calculate this correctly; and, in any case, cachefiles actually ignores the value and just skips the block. Fix this by: (1) Change the value passed to indicate the amount of extra data that can be added to the operation (now ->submit_extendable_to). This is much simpler to calculate as it's just the end of the folio minus the top of the data within the folio - rather than having to account for data spread over multiple folios. (2) Make cachefiles add some of this data if the subrequest it is given ends at the network file's i_size if the extra data is sufficient to pad out to a whole block. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20240814203850.2240469-22-dhowells@redhat.com/ # v2 Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-07-12 11:44:30 +00:00
unsigned int submit_extendable_to; /* Amount I/O can be rounded up to */
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
void (*prepare_write)(struct netfs_io_subrequest *subreq);
void (*issue_write)(struct netfs_io_subrequest *subreq);
/* Collection tracking */
struct list_head subrequests; /* Contributory I/O operations */
struct netfs_io_subrequest *front; /* Op being collected */
unsigned long long collected_to; /* Position we've collected results to */
size_t transferred; /* The amount transferred from this stream */
unsigned short error; /* Aggregate error for the stream */
enum netfs_io_source source; /* Where to read from/write to */
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
unsigned char stream_nr; /* Index of stream in parent table */
bool avail; /* T if stream is available */
bool active; /* T if stream is active */
bool need_retry; /* T if this stream needs retrying */
bool failed; /* T if this stream failed */
netfs: Fix unbuffered write error handling If all the subrequests in an unbuffered write stream fail, the subrequest collector doesn't update the stream->transferred value and it retains its initial LONG_MAX value. Unfortunately, if all active streams fail, then we take the smallest value of { LONG_MAX, LONG_MAX, ... } as the value to set in wreq->transferred - which is then returned from ->write_iter(). LONG_MAX was chosen as the initial value so that all the streams can be quickly assessed by taking the smallest value of all stream->transferred - but this only works if we've set any of them. Fix this by adding a flag to indicate whether the value in stream->transferred is valid and checking that when we integrate the values. stream->transferred can then be initialised to zero. This was found by running the generic/750 xfstest against cifs with cache=none. It splices data to the target file. Once (if) it has used up all the available scratch space, the writes start failing with ENOSPC. This causes ->write_iter() to fail. However, it was returning wreq->transferred, i.e. LONG_MAX, rather than an error (because it thought the amount transferred was non-zero) and iter_file_splice_write() would then try to clean up that amount of pipe bufferage - leading to an oops when it overran. The kernel log showed: CIFS: VFS: Send error in write = -28 followed by: BUG: kernel NULL pointer dereference, address: 0000000000000008 with: RIP: 0010:iter_file_splice_write+0x3a4/0x520 do_splice+0x197/0x4e0 or: RIP: 0010:pipe_buf_release (include/linux/pipe_fs_i.h:282) iter_file_splice_write (fs/splice.c:755) Also put a warning check into splice to announce if ->write_iter() returned that it had written more than it was asked to. Fixes: 288ace2f57c9 ("netfs: New writeback implementation") Reported-by: Xiaoli Feng <fengxiaoli0714@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220445 Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/915443.1755207950@warthog.procyon.org.uk cc: Paulo Alcantara <pc@manguebit.org> cc: Steve French <sfrench@samba.org> cc: Shyam Prasad N <sprasad@microsoft.com> cc: netfs@lists.linux.dev cc: linux-cifs@vger.kernel.org cc: linux-fsdevel@vger.kernel.org cc: stable@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-08-14 21:45:50 +00:00
bool transferred_valid; /* T is ->transferred is valid */
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
};
netfs: Define an interface to talk to a cache Add an interface to the netfs helper library for reading data from the cache instead of downloading it from the server and support for writing data just downloaded or cleared to the cache. The API passes an iov_iter to the cache read/write routines to indicate the data/buffer to be used. This is done using the ITER_XARRAY type to provide direct access to the netfs inode's pagecache. When the netfs's ->begin_cache_operation() method is called, this must fill in the cache_resources in the netfs_read_request struct, including the netfs_cache_ops used by the helper lib to talk to the cache. The helper lib does not directly access the cache. Changes: v6: - Call trace_netfs_read() after beginning the cache op so that the cookie debug ID can be logged[3]. - Don't record the error from writing to the cache. We don't want to pass it back to the netfs[4]. - Fix copy-to-cache subreq amalgamation to not round up as it goes along otherwise it overcalculates the length of the write[5]. v5: - Use end_page_fscache() rather than unlock_page_fscache()[2]. v4: - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). - Add missing inc of netfs_n_rh_read stat. - Move initial definition of fscache_begin_read_operation() elsewhere. - Need to call op->begin_cache_operation() from netfs_write_begin(). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [2] Link: https://lore.kernel.org/r/161781045123.463527.14533348855710902201.stgit@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/161781046256.463527.18158681600085556192.stgit@warthog.procyon.org.uk/ [4] Link: https://lore.kernel.org/r/161781047695.463527.7463536103593997492.stgit@warthog.procyon.org.uk/ [5] Link: https://lore.kernel.org/r/161118141321.1232039.8296910406755622458.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161036700.2537118.11170748455436854978.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340399569.1303470.1138884774643385730.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539542874.286939.13337898213448136687.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653799826.2770958.9015430297426331950.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789081462.6155.3853904866933313256.stgit@warthog.procyon.org.uk/ # v6
2020-02-06 14:22:24 +00:00
/*
* Resources required to do operations on a cache.
*/
struct netfs_cache_resources {
const struct netfs_cache_ops *ops;
void *cache_priv;
void *cache_priv2;
unsigned int debug_id; /* Cookie debug ID */
fscache: Implement cookie invalidation Add a function to invalidate the cache behind a cookie: void fscache_invalidate(struct fscache_cookie *cookie, const void *aux_data, loff_t size, unsigned int flags) This causes any cached data for the specified cookie to be discarded. If the cookie is marked as being in use, a new cache object will be created if possible and future I/O will use that instead. In-flight I/O should be abandoned (writes) or reconsidered (reads). Each time it is called cookie->inval_counter is incremented and this can be used to detect invalidation at the end of an I/O operation. The coherency data attached to the cookie can be updated and the cookie size should be reset. One flag is available, FSCACHE_INVAL_DIO_WRITE, which should be used to indicate invalidation due to a DIO write on a file. This will temporarily disable caching for this cookie. Changes ======= ver #2: - Should only change to inval state if can get access to cache. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com Link: https://lore.kernel.org/r/163819602231.215744.11206598147269491575.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/163906909707.143852.18056070560477964891.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/163967107447.1823006.5945029409592119962.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/164021512640.640689.11418616313147754172.stgit@warthog.procyon.org.uk/ # v4
2021-10-20 14:53:34 +00:00
unsigned int inval_counter; /* object->inval_counter at begin_op */
netfs: Define an interface to talk to a cache Add an interface to the netfs helper library for reading data from the cache instead of downloading it from the server and support for writing data just downloaded or cleared to the cache. The API passes an iov_iter to the cache read/write routines to indicate the data/buffer to be used. This is done using the ITER_XARRAY type to provide direct access to the netfs inode's pagecache. When the netfs's ->begin_cache_operation() method is called, this must fill in the cache_resources in the netfs_read_request struct, including the netfs_cache_ops used by the helper lib to talk to the cache. The helper lib does not directly access the cache. Changes: v6: - Call trace_netfs_read() after beginning the cache op so that the cookie debug ID can be logged[3]. - Don't record the error from writing to the cache. We don't want to pass it back to the netfs[4]. - Fix copy-to-cache subreq amalgamation to not round up as it goes along otherwise it overcalculates the length of the write[5]. v5: - Use end_page_fscache() rather than unlock_page_fscache()[2]. v4: - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). - Add missing inc of netfs_n_rh_read stat. - Move initial definition of fscache_begin_read_operation() elsewhere. - Need to call op->begin_cache_operation() from netfs_write_begin(). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [2] Link: https://lore.kernel.org/r/161781045123.463527.14533348855710902201.stgit@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/161781046256.463527.18158681600085556192.stgit@warthog.procyon.org.uk/ [4] Link: https://lore.kernel.org/r/161781047695.463527.7463536103593997492.stgit@warthog.procyon.org.uk/ [5] Link: https://lore.kernel.org/r/161118141321.1232039.8296910406755622458.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161036700.2537118.11170748455436854978.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340399569.1303470.1138884774643385730.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539542874.286939.13337898213448136687.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653799826.2770958.9015430297426331950.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789081462.6155.3853904866933313256.stgit@warthog.procyon.org.uk/ # v6
2020-02-06 14:22:24 +00:00
};
netfs: Provide readahead and readpage netfs helpers Add a pair of helper functions: (*) netfs_readahead() (*) netfs_readpage() to do the work of handling a readahead or a readpage, where the page(s) that form part of the request may be split between the local cache, the server or just require clearing, and may be single pages and transparent huge pages. This is all handled within the helper. Note that while both will read from the cache if there is data present, only netfs_readahead() will expand the request beyond what it was asked to do, and only netfs_readahead() will write back to the cache. netfs_readpage(), on the other hand, is synchronous and only fetches the page (which might be a THP) it is asked for. The netfs gives the helper parameters from the VM, the cache cookie it wants to use (or NULL) and a table of operations (only one of which is mandatory): (*) expand_readahead() [optional] Called to allow the netfs to request an expansion of a readahead request to meet its own alignment requirements. This is done by changing rreq->start and rreq->len. (*) clamp_length() [optional] Called to allow the netfs to cut down a subrequest to meet its own boundary requirements. If it does this, the helper will generate additional subrequests until the full request is satisfied. (*) is_still_valid() [optional] Called to find out if the data just read from the cache has been invalidated and must be reread from the server. (*) issue_op() [required] Called to ask the netfs to issue a read to the server. The subrequest describes the read. The read request holds information about the file being accessed. The netfs can cache information in rreq->netfs_priv. Upon completion, the netfs should set the error, transferred and can also set FSCACHE_SREQ_CLEAR_TAIL and then call fscache_subreq_terminated(). (*) done() [optional] Called after the pages have been unlocked. The read request is still pinning the file and mapping and may still be pinning pages with PG_fscache. rreq->error indicates any error that has been accumulated. (*) cleanup() [optional] Called when the helper is disposing of a finished read request. This allows the netfs to clear rreq->netfs_priv. Netfs support is enabled with CONFIG_NETFS_SUPPORT=y. It will be built even if CONFIG_FSCACHE=n and in this case much of it should be optimised away, allowing the filesystem to use it even when caching is disabled. Changes: v5: - Comment why netfs_readahead() is putting pages[2]. - Use page_file_mapping() rather than page->mapping[2]. - Use page_index() rather than page->index[2]. - Use set_page_fscache()[3] rather then SetPageFsCache() as this takes an appropriate ref too[4]. v4: - Folded in a kerneldoc comment fix. - Folded in a fix for the error handling in the case that ENOMEM occurs. - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/20210321014202.GF3420@casper.infradead.org/ [2] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/CAHk-=wh+2gbF7XEjYc=HV9w_2uVzVf7vs60BPz0gFA=+pUm3ww@mail.gmail.com/ [4] Link: https://lore.kernel.org/r/160588497406.3465195.18003475695899726222.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118136849.1232039.8923686136144228724.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161032290.2537118.13400578415247339173.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340394873.1303470.6237319335883242536.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539537375.286939.16642940088716990995.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653795430.2770958.4947584573720000554.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789076581.6155.6745849361504760209.stgit@warthog.procyon.org.uk/ # v6
2020-05-13 16:41:20 +00:00
/*
* Descriptor for a single component subrequest. Each operation represents an
* individual read/write from/to a server, a cache, a journal, etc..
*
* The buffer iterator is persistent for the life of the subrequest struct and
* the pages it points to can be relied on to exist for the duration.
netfs: Provide readahead and readpage netfs helpers Add a pair of helper functions: (*) netfs_readahead() (*) netfs_readpage() to do the work of handling a readahead or a readpage, where the page(s) that form part of the request may be split between the local cache, the server or just require clearing, and may be single pages and transparent huge pages. This is all handled within the helper. Note that while both will read from the cache if there is data present, only netfs_readahead() will expand the request beyond what it was asked to do, and only netfs_readahead() will write back to the cache. netfs_readpage(), on the other hand, is synchronous and only fetches the page (which might be a THP) it is asked for. The netfs gives the helper parameters from the VM, the cache cookie it wants to use (or NULL) and a table of operations (only one of which is mandatory): (*) expand_readahead() [optional] Called to allow the netfs to request an expansion of a readahead request to meet its own alignment requirements. This is done by changing rreq->start and rreq->len. (*) clamp_length() [optional] Called to allow the netfs to cut down a subrequest to meet its own boundary requirements. If it does this, the helper will generate additional subrequests until the full request is satisfied. (*) is_still_valid() [optional] Called to find out if the data just read from the cache has been invalidated and must be reread from the server. (*) issue_op() [required] Called to ask the netfs to issue a read to the server. The subrequest describes the read. The read request holds information about the file being accessed. The netfs can cache information in rreq->netfs_priv. Upon completion, the netfs should set the error, transferred and can also set FSCACHE_SREQ_CLEAR_TAIL and then call fscache_subreq_terminated(). (*) done() [optional] Called after the pages have been unlocked. The read request is still pinning the file and mapping and may still be pinning pages with PG_fscache. rreq->error indicates any error that has been accumulated. (*) cleanup() [optional] Called when the helper is disposing of a finished read request. This allows the netfs to clear rreq->netfs_priv. Netfs support is enabled with CONFIG_NETFS_SUPPORT=y. It will be built even if CONFIG_FSCACHE=n and in this case much of it should be optimised away, allowing the filesystem to use it even when caching is disabled. Changes: v5: - Comment why netfs_readahead() is putting pages[2]. - Use page_file_mapping() rather than page->mapping[2]. - Use page_index() rather than page->index[2]. - Use set_page_fscache()[3] rather then SetPageFsCache() as this takes an appropriate ref too[4]. v4: - Folded in a kerneldoc comment fix. - Folded in a fix for the error handling in the case that ENOMEM occurs. - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/20210321014202.GF3420@casper.infradead.org/ [2] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/CAHk-=wh+2gbF7XEjYc=HV9w_2uVzVf7vs60BPz0gFA=+pUm3ww@mail.gmail.com/ [4] Link: https://lore.kernel.org/r/160588497406.3465195.18003475695899726222.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118136849.1232039.8923686136144228724.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161032290.2537118.13400578415247339173.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340394873.1303470.6237319335883242536.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539537375.286939.16642940088716990995.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653795430.2770958.4947584573720000554.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789076581.6155.6745849361504760209.stgit@warthog.procyon.org.uk/ # v6
2020-05-13 16:41:20 +00:00
*/
struct netfs_io_subrequest {
struct netfs_io_request *rreq; /* Supervising I/O request */
struct work_struct work;
netfs: Provide readahead and readpage netfs helpers Add a pair of helper functions: (*) netfs_readahead() (*) netfs_readpage() to do the work of handling a readahead or a readpage, where the page(s) that form part of the request may be split between the local cache, the server or just require clearing, and may be single pages and transparent huge pages. This is all handled within the helper. Note that while both will read from the cache if there is data present, only netfs_readahead() will expand the request beyond what it was asked to do, and only netfs_readahead() will write back to the cache. netfs_readpage(), on the other hand, is synchronous and only fetches the page (which might be a THP) it is asked for. The netfs gives the helper parameters from the VM, the cache cookie it wants to use (or NULL) and a table of operations (only one of which is mandatory): (*) expand_readahead() [optional] Called to allow the netfs to request an expansion of a readahead request to meet its own alignment requirements. This is done by changing rreq->start and rreq->len. (*) clamp_length() [optional] Called to allow the netfs to cut down a subrequest to meet its own boundary requirements. If it does this, the helper will generate additional subrequests until the full request is satisfied. (*) is_still_valid() [optional] Called to find out if the data just read from the cache has been invalidated and must be reread from the server. (*) issue_op() [required] Called to ask the netfs to issue a read to the server. The subrequest describes the read. The read request holds information about the file being accessed. The netfs can cache information in rreq->netfs_priv. Upon completion, the netfs should set the error, transferred and can also set FSCACHE_SREQ_CLEAR_TAIL and then call fscache_subreq_terminated(). (*) done() [optional] Called after the pages have been unlocked. The read request is still pinning the file and mapping and may still be pinning pages with PG_fscache. rreq->error indicates any error that has been accumulated. (*) cleanup() [optional] Called when the helper is disposing of a finished read request. This allows the netfs to clear rreq->netfs_priv. Netfs support is enabled with CONFIG_NETFS_SUPPORT=y. It will be built even if CONFIG_FSCACHE=n and in this case much of it should be optimised away, allowing the filesystem to use it even when caching is disabled. Changes: v5: - Comment why netfs_readahead() is putting pages[2]. - Use page_file_mapping() rather than page->mapping[2]. - Use page_index() rather than page->index[2]. - Use set_page_fscache()[3] rather then SetPageFsCache() as this takes an appropriate ref too[4]. v4: - Folded in a kerneldoc comment fix. - Folded in a fix for the error handling in the case that ENOMEM occurs. - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/20210321014202.GF3420@casper.infradead.org/ [2] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/CAHk-=wh+2gbF7XEjYc=HV9w_2uVzVf7vs60BPz0gFA=+pUm3ww@mail.gmail.com/ [4] Link: https://lore.kernel.org/r/160588497406.3465195.18003475695899726222.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118136849.1232039.8923686136144228724.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161032290.2537118.13400578415247339173.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340394873.1303470.6237319335883242536.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539537375.286939.16642940088716990995.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653795430.2770958.4947584573720000554.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789076581.6155.6745849361504760209.stgit@warthog.procyon.org.uk/ # v6
2020-05-13 16:41:20 +00:00
struct list_head rreq_link; /* Link in rreq->subrequests */
struct iov_iter io_iter; /* Iterator for this subrequest */
unsigned long long start; /* Where to start the I/O */
netfs: Provide readahead and readpage netfs helpers Add a pair of helper functions: (*) netfs_readahead() (*) netfs_readpage() to do the work of handling a readahead or a readpage, where the page(s) that form part of the request may be split between the local cache, the server or just require clearing, and may be single pages and transparent huge pages. This is all handled within the helper. Note that while both will read from the cache if there is data present, only netfs_readahead() will expand the request beyond what it was asked to do, and only netfs_readahead() will write back to the cache. netfs_readpage(), on the other hand, is synchronous and only fetches the page (which might be a THP) it is asked for. The netfs gives the helper parameters from the VM, the cache cookie it wants to use (or NULL) and a table of operations (only one of which is mandatory): (*) expand_readahead() [optional] Called to allow the netfs to request an expansion of a readahead request to meet its own alignment requirements. This is done by changing rreq->start and rreq->len. (*) clamp_length() [optional] Called to allow the netfs to cut down a subrequest to meet its own boundary requirements. If it does this, the helper will generate additional subrequests until the full request is satisfied. (*) is_still_valid() [optional] Called to find out if the data just read from the cache has been invalidated and must be reread from the server. (*) issue_op() [required] Called to ask the netfs to issue a read to the server. The subrequest describes the read. The read request holds information about the file being accessed. The netfs can cache information in rreq->netfs_priv. Upon completion, the netfs should set the error, transferred and can also set FSCACHE_SREQ_CLEAR_TAIL and then call fscache_subreq_terminated(). (*) done() [optional] Called after the pages have been unlocked. The read request is still pinning the file and mapping and may still be pinning pages with PG_fscache. rreq->error indicates any error that has been accumulated. (*) cleanup() [optional] Called when the helper is disposing of a finished read request. This allows the netfs to clear rreq->netfs_priv. Netfs support is enabled with CONFIG_NETFS_SUPPORT=y. It will be built even if CONFIG_FSCACHE=n and in this case much of it should be optimised away, allowing the filesystem to use it even when caching is disabled. Changes: v5: - Comment why netfs_readahead() is putting pages[2]. - Use page_file_mapping() rather than page->mapping[2]. - Use page_index() rather than page->index[2]. - Use set_page_fscache()[3] rather then SetPageFsCache() as this takes an appropriate ref too[4]. v4: - Folded in a kerneldoc comment fix. - Folded in a fix for the error handling in the case that ENOMEM occurs. - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/20210321014202.GF3420@casper.infradead.org/ [2] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/CAHk-=wh+2gbF7XEjYc=HV9w_2uVzVf7vs60BPz0gFA=+pUm3ww@mail.gmail.com/ [4] Link: https://lore.kernel.org/r/160588497406.3465195.18003475695899726222.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118136849.1232039.8923686136144228724.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161032290.2537118.13400578415247339173.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340394873.1303470.6237319335883242536.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539537375.286939.16642940088716990995.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653795430.2770958.4947584573720000554.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789076581.6155.6745849361504760209.stgit@warthog.procyon.org.uk/ # v6
2020-05-13 16:41:20 +00:00
size_t len; /* Size of the I/O */
size_t transferred; /* Amount of data transferred */
refcount_t ref;
netfs: Provide readahead and readpage netfs helpers Add a pair of helper functions: (*) netfs_readahead() (*) netfs_readpage() to do the work of handling a readahead or a readpage, where the page(s) that form part of the request may be split between the local cache, the server or just require clearing, and may be single pages and transparent huge pages. This is all handled within the helper. Note that while both will read from the cache if there is data present, only netfs_readahead() will expand the request beyond what it was asked to do, and only netfs_readahead() will write back to the cache. netfs_readpage(), on the other hand, is synchronous and only fetches the page (which might be a THP) it is asked for. The netfs gives the helper parameters from the VM, the cache cookie it wants to use (or NULL) and a table of operations (only one of which is mandatory): (*) expand_readahead() [optional] Called to allow the netfs to request an expansion of a readahead request to meet its own alignment requirements. This is done by changing rreq->start and rreq->len. (*) clamp_length() [optional] Called to allow the netfs to cut down a subrequest to meet its own boundary requirements. If it does this, the helper will generate additional subrequests until the full request is satisfied. (*) is_still_valid() [optional] Called to find out if the data just read from the cache has been invalidated and must be reread from the server. (*) issue_op() [required] Called to ask the netfs to issue a read to the server. The subrequest describes the read. The read request holds information about the file being accessed. The netfs can cache information in rreq->netfs_priv. Upon completion, the netfs should set the error, transferred and can also set FSCACHE_SREQ_CLEAR_TAIL and then call fscache_subreq_terminated(). (*) done() [optional] Called after the pages have been unlocked. The read request is still pinning the file and mapping and may still be pinning pages with PG_fscache. rreq->error indicates any error that has been accumulated. (*) cleanup() [optional] Called when the helper is disposing of a finished read request. This allows the netfs to clear rreq->netfs_priv. Netfs support is enabled with CONFIG_NETFS_SUPPORT=y. It will be built even if CONFIG_FSCACHE=n and in this case much of it should be optimised away, allowing the filesystem to use it even when caching is disabled. Changes: v5: - Comment why netfs_readahead() is putting pages[2]. - Use page_file_mapping() rather than page->mapping[2]. - Use page_index() rather than page->index[2]. - Use set_page_fscache()[3] rather then SetPageFsCache() as this takes an appropriate ref too[4]. v4: - Folded in a kerneldoc comment fix. - Folded in a fix for the error handling in the case that ENOMEM occurs. - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/20210321014202.GF3420@casper.infradead.org/ [2] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/CAHk-=wh+2gbF7XEjYc=HV9w_2uVzVf7vs60BPz0gFA=+pUm3ww@mail.gmail.com/ [4] Link: https://lore.kernel.org/r/160588497406.3465195.18003475695899726222.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118136849.1232039.8923686136144228724.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161032290.2537118.13400578415247339173.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340394873.1303470.6237319335883242536.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539537375.286939.16642940088716990995.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653795430.2770958.4947584573720000554.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789076581.6155.6745849361504760209.stgit@warthog.procyon.org.uk/ # v6
2020-05-13 16:41:20 +00:00
short error; /* 0 or error that occurred */
unsigned short debug_index; /* Index in list (for debugging output) */
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
unsigned int nr_segs; /* Number of segs in io_iter */
netfs: Work around recursion by abandoning retry if nothing read syzkaller reported recursion with a loop of three calls (netfs_rreq_assess, netfs_retry_reads and netfs_rreq_terminated) hitting the limit of the stack during an unbuffered or direct I/O read. There are a number of issues: (1) There is no limit on the number of retries. (2) A subrequest is supposed to be abandoned if it does not transfer anything (NETFS_SREQ_NO_PROGRESS), but that isn't checked under all circumstances. (3) The actual root cause, which is this: if (atomic_dec_and_test(&rreq->nr_outstanding)) netfs_rreq_terminated(rreq, ...); When we do a retry, we bump the rreq->nr_outstanding counter to prevent the final cleanup phase running before we've finished dispatching the retries. The problem is if we hit 0, we have to do the cleanup phase - but we're in the cleanup phase and end up repeating the retry cycle, hence the recursion. Work around the problem by limiting the number of retries. This is based on Lizhi Xu's patch[1], and makes the following changes: (1) Replace NETFS_SREQ_NO_PROGRESS with NETFS_SREQ_MADE_PROGRESS and make the filesystem set it if it managed to read or write at least one byte of data. Clear this bit before issuing a subrequest. (2) Add a ->retry_count member to the subrequest and increment it any time we do a retry. (3) Remove the NETFS_SREQ_RETRYING flag as it is superfluous with ->retry_count. If the latter is non-zero, we're doing a retry. (4) Abandon a subrequest if retry_count is non-zero and we made no progress. (5) Use ->retry_count in both the write-side and the read-size. [?] Question: Should I set a hard limit on retry_count in both read and write? Say it hits 50, we always abandon it. The problem is that these changes only mitigate the issue. As long as it made at least one byte of progress, the recursion is still an issue. This patch mitigates the problem, but does not fix the underlying cause. I have patches that will do that, but it's an intrusive fix that's currently pending for the next merge window. The oops generated by KASAN looks something like: BUG: TASK stack guard page was hit at ffffc9000482ff48 (stack is ffffc90004830000..ffffc90004838000) Oops: stack guard page: 0000 [#1] PREEMPT SMP KASAN NOPTI ... RIP: 0010:mark_lock+0x25/0xc60 kernel/locking/lockdep.c:4686 ... mark_usage kernel/locking/lockdep.c:4646 [inline] __lock_acquire+0x906/0x3ce0 kernel/locking/lockdep.c:5156 lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5825 local_lock_acquire include/linux/local_lock_internal.h:29 [inline] ___slab_alloc+0x123/0x1880 mm/slub.c:3695 __slab_alloc.constprop.0+0x56/0xb0 mm/slub.c:3908 __slab_alloc_node mm/slub.c:3961 [inline] slab_alloc_node mm/slub.c:4122 [inline] kmem_cache_alloc_noprof+0x2a7/0x2f0 mm/slub.c:4141 radix_tree_node_alloc.constprop.0+0x1e8/0x350 lib/radix-tree.c:253 idr_get_free+0x528/0xa40 lib/radix-tree.c:1506 idr_alloc_u32+0x191/0x2f0 lib/idr.c:46 idr_alloc+0xc1/0x130 lib/idr.c:87 p9_tag_alloc+0x394/0x870 net/9p/client.c:321 p9_client_prepare_req+0x19f/0x4d0 net/9p/client.c:644 p9_client_zc_rpc.constprop.0+0x105/0x880 net/9p/client.c:793 p9_client_read_once+0x443/0x820 net/9p/client.c:1570 p9_client_read+0x13f/0x1b0 net/9p/client.c:1534 v9fs_issue_read+0x115/0x310 fs/9p/vfs_addr.c:74 netfs_retry_read_subrequests fs/netfs/read_retry.c:60 [inline] netfs_retry_reads+0x153a/0x1d00 fs/netfs/read_retry.c:232 netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371 netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407 netfs_retry_reads+0x155e/0x1d00 fs/netfs/read_retry.c:235 netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371 netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407 netfs_retry_reads+0x155e/0x1d00 fs/netfs/read_retry.c:235 netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371 ... netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407 netfs_retry_reads+0x155e/0x1d00 fs/netfs/read_retry.c:235 netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371 netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407 netfs_retry_reads+0x155e/0x1d00 fs/netfs/read_retry.c:235 netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371 netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407 netfs_dispatch_unbuffered_reads fs/netfs/direct_read.c:103 [inline] netfs_unbuffered_read fs/netfs/direct_read.c:127 [inline] netfs_unbuffered_read_iter_locked+0x12f6/0x19b0 fs/netfs/direct_read.c:221 netfs_unbuffered_read_iter+0xc5/0x100 fs/netfs/direct_read.c:256 v9fs_file_read_iter+0xbf/0x100 fs/9p/vfs_file.c:361 do_iter_readv_writev+0x614/0x7f0 fs/read_write.c:832 vfs_readv+0x4cf/0x890 fs/read_write.c:1025 do_preadv fs/read_write.c:1142 [inline] __do_sys_preadv fs/read_write.c:1192 [inline] __se_sys_preadv fs/read_write.c:1187 [inline] __x64_sys_preadv+0x22d/0x310 fs/read_write.c:1187 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 Fixes: ee4cdf7ba857 ("netfs: Speed up buffered reading") Closes: https://syzkaller.appspot.com/bug?extid=1fc6f64c40a9d143cfb6 Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20241108034020.3695718-1-lizhi.xu@windriver.com/ [1] Link: https://lore.kernel.org/r/20241213135013.2964079-9-dhowells@redhat.com Tested-by: syzbot+885c03ad650731743489@syzkaller.appspotmail.com Suggested-by: Lizhi Xu <lizhi.xu@windriver.com> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Jeff Layton <jlayton@kernel.org> cc: v9fs@lists.linux.dev cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Reported-by: syzbot+885c03ad650731743489@syzkaller.appspotmail.com Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-12-13 13:50:08 +00:00
u8 retry_count; /* The number of retries (0 on initial pass) */
enum netfs_io_source source; /* Where to read from/write to */
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
unsigned char stream_nr; /* I/O stream this belongs to */
netfs: Provide readahead and readpage netfs helpers Add a pair of helper functions: (*) netfs_readahead() (*) netfs_readpage() to do the work of handling a readahead or a readpage, where the page(s) that form part of the request may be split between the local cache, the server or just require clearing, and may be single pages and transparent huge pages. This is all handled within the helper. Note that while both will read from the cache if there is data present, only netfs_readahead() will expand the request beyond what it was asked to do, and only netfs_readahead() will write back to the cache. netfs_readpage(), on the other hand, is synchronous and only fetches the page (which might be a THP) it is asked for. The netfs gives the helper parameters from the VM, the cache cookie it wants to use (or NULL) and a table of operations (only one of which is mandatory): (*) expand_readahead() [optional] Called to allow the netfs to request an expansion of a readahead request to meet its own alignment requirements. This is done by changing rreq->start and rreq->len. (*) clamp_length() [optional] Called to allow the netfs to cut down a subrequest to meet its own boundary requirements. If it does this, the helper will generate additional subrequests until the full request is satisfied. (*) is_still_valid() [optional] Called to find out if the data just read from the cache has been invalidated and must be reread from the server. (*) issue_op() [required] Called to ask the netfs to issue a read to the server. The subrequest describes the read. The read request holds information about the file being accessed. The netfs can cache information in rreq->netfs_priv. Upon completion, the netfs should set the error, transferred and can also set FSCACHE_SREQ_CLEAR_TAIL and then call fscache_subreq_terminated(). (*) done() [optional] Called after the pages have been unlocked. The read request is still pinning the file and mapping and may still be pinning pages with PG_fscache. rreq->error indicates any error that has been accumulated. (*) cleanup() [optional] Called when the helper is disposing of a finished read request. This allows the netfs to clear rreq->netfs_priv. Netfs support is enabled with CONFIG_NETFS_SUPPORT=y. It will be built even if CONFIG_FSCACHE=n and in this case much of it should be optimised away, allowing the filesystem to use it even when caching is disabled. Changes: v5: - Comment why netfs_readahead() is putting pages[2]. - Use page_file_mapping() rather than page->mapping[2]. - Use page_index() rather than page->index[2]. - Use set_page_fscache()[3] rather then SetPageFsCache() as this takes an appropriate ref too[4]. v4: - Folded in a kerneldoc comment fix. - Folded in a fix for the error handling in the case that ENOMEM occurs. - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/20210321014202.GF3420@casper.infradead.org/ [2] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/CAHk-=wh+2gbF7XEjYc=HV9w_2uVzVf7vs60BPz0gFA=+pUm3ww@mail.gmail.com/ [4] Link: https://lore.kernel.org/r/160588497406.3465195.18003475695899726222.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118136849.1232039.8923686136144228724.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161032290.2537118.13400578415247339173.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340394873.1303470.6237319335883242536.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539537375.286939.16642940088716990995.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653795430.2770958.4947584573720000554.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789076581.6155.6745849361504760209.stgit@warthog.procyon.org.uk/ # v6
2020-05-13 16:41:20 +00:00
unsigned long flags;
#define NETFS_SREQ_COPY_TO_CACHE 0 /* Set if should copy the data to the cache */
netfs: Provide readahead and readpage netfs helpers Add a pair of helper functions: (*) netfs_readahead() (*) netfs_readpage() to do the work of handling a readahead or a readpage, where the page(s) that form part of the request may be split between the local cache, the server or just require clearing, and may be single pages and transparent huge pages. This is all handled within the helper. Note that while both will read from the cache if there is data present, only netfs_readahead() will expand the request beyond what it was asked to do, and only netfs_readahead() will write back to the cache. netfs_readpage(), on the other hand, is synchronous and only fetches the page (which might be a THP) it is asked for. The netfs gives the helper parameters from the VM, the cache cookie it wants to use (or NULL) and a table of operations (only one of which is mandatory): (*) expand_readahead() [optional] Called to allow the netfs to request an expansion of a readahead request to meet its own alignment requirements. This is done by changing rreq->start and rreq->len. (*) clamp_length() [optional] Called to allow the netfs to cut down a subrequest to meet its own boundary requirements. If it does this, the helper will generate additional subrequests until the full request is satisfied. (*) is_still_valid() [optional] Called to find out if the data just read from the cache has been invalidated and must be reread from the server. (*) issue_op() [required] Called to ask the netfs to issue a read to the server. The subrequest describes the read. The read request holds information about the file being accessed. The netfs can cache information in rreq->netfs_priv. Upon completion, the netfs should set the error, transferred and can also set FSCACHE_SREQ_CLEAR_TAIL and then call fscache_subreq_terminated(). (*) done() [optional] Called after the pages have been unlocked. The read request is still pinning the file and mapping and may still be pinning pages with PG_fscache. rreq->error indicates any error that has been accumulated. (*) cleanup() [optional] Called when the helper is disposing of a finished read request. This allows the netfs to clear rreq->netfs_priv. Netfs support is enabled with CONFIG_NETFS_SUPPORT=y. It will be built even if CONFIG_FSCACHE=n and in this case much of it should be optimised away, allowing the filesystem to use it even when caching is disabled. Changes: v5: - Comment why netfs_readahead() is putting pages[2]. - Use page_file_mapping() rather than page->mapping[2]. - Use page_index() rather than page->index[2]. - Use set_page_fscache()[3] rather then SetPageFsCache() as this takes an appropriate ref too[4]. v4: - Folded in a kerneldoc comment fix. - Folded in a fix for the error handling in the case that ENOMEM occurs. - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/20210321014202.GF3420@casper.infradead.org/ [2] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/CAHk-=wh+2gbF7XEjYc=HV9w_2uVzVf7vs60BPz0gFA=+pUm3ww@mail.gmail.com/ [4] Link: https://lore.kernel.org/r/160588497406.3465195.18003475695899726222.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118136849.1232039.8923686136144228724.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161032290.2537118.13400578415247339173.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340394873.1303470.6237319335883242536.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539537375.286939.16642940088716990995.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653795430.2770958.4947584573720000554.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789076581.6155.6745849361504760209.stgit@warthog.procyon.org.uk/ # v6
2020-05-13 16:41:20 +00:00
#define NETFS_SREQ_CLEAR_TAIL 1 /* Set if the rest of the read should be cleared */
netfs: Work around recursion by abandoning retry if nothing read syzkaller reported recursion with a loop of three calls (netfs_rreq_assess, netfs_retry_reads and netfs_rreq_terminated) hitting the limit of the stack during an unbuffered or direct I/O read. There are a number of issues: (1) There is no limit on the number of retries. (2) A subrequest is supposed to be abandoned if it does not transfer anything (NETFS_SREQ_NO_PROGRESS), but that isn't checked under all circumstances. (3) The actual root cause, which is this: if (atomic_dec_and_test(&rreq->nr_outstanding)) netfs_rreq_terminated(rreq, ...); When we do a retry, we bump the rreq->nr_outstanding counter to prevent the final cleanup phase running before we've finished dispatching the retries. The problem is if we hit 0, we have to do the cleanup phase - but we're in the cleanup phase and end up repeating the retry cycle, hence the recursion. Work around the problem by limiting the number of retries. This is based on Lizhi Xu's patch[1], and makes the following changes: (1) Replace NETFS_SREQ_NO_PROGRESS with NETFS_SREQ_MADE_PROGRESS and make the filesystem set it if it managed to read or write at least one byte of data. Clear this bit before issuing a subrequest. (2) Add a ->retry_count member to the subrequest and increment it any time we do a retry. (3) Remove the NETFS_SREQ_RETRYING flag as it is superfluous with ->retry_count. If the latter is non-zero, we're doing a retry. (4) Abandon a subrequest if retry_count is non-zero and we made no progress. (5) Use ->retry_count in both the write-side and the read-size. [?] Question: Should I set a hard limit on retry_count in both read and write? Say it hits 50, we always abandon it. The problem is that these changes only mitigate the issue. As long as it made at least one byte of progress, the recursion is still an issue. This patch mitigates the problem, but does not fix the underlying cause. I have patches that will do that, but it's an intrusive fix that's currently pending for the next merge window. The oops generated by KASAN looks something like: BUG: TASK stack guard page was hit at ffffc9000482ff48 (stack is ffffc90004830000..ffffc90004838000) Oops: stack guard page: 0000 [#1] PREEMPT SMP KASAN NOPTI ... RIP: 0010:mark_lock+0x25/0xc60 kernel/locking/lockdep.c:4686 ... mark_usage kernel/locking/lockdep.c:4646 [inline] __lock_acquire+0x906/0x3ce0 kernel/locking/lockdep.c:5156 lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5825 local_lock_acquire include/linux/local_lock_internal.h:29 [inline] ___slab_alloc+0x123/0x1880 mm/slub.c:3695 __slab_alloc.constprop.0+0x56/0xb0 mm/slub.c:3908 __slab_alloc_node mm/slub.c:3961 [inline] slab_alloc_node mm/slub.c:4122 [inline] kmem_cache_alloc_noprof+0x2a7/0x2f0 mm/slub.c:4141 radix_tree_node_alloc.constprop.0+0x1e8/0x350 lib/radix-tree.c:253 idr_get_free+0x528/0xa40 lib/radix-tree.c:1506 idr_alloc_u32+0x191/0x2f0 lib/idr.c:46 idr_alloc+0xc1/0x130 lib/idr.c:87 p9_tag_alloc+0x394/0x870 net/9p/client.c:321 p9_client_prepare_req+0x19f/0x4d0 net/9p/client.c:644 p9_client_zc_rpc.constprop.0+0x105/0x880 net/9p/client.c:793 p9_client_read_once+0x443/0x820 net/9p/client.c:1570 p9_client_read+0x13f/0x1b0 net/9p/client.c:1534 v9fs_issue_read+0x115/0x310 fs/9p/vfs_addr.c:74 netfs_retry_read_subrequests fs/netfs/read_retry.c:60 [inline] netfs_retry_reads+0x153a/0x1d00 fs/netfs/read_retry.c:232 netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371 netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407 netfs_retry_reads+0x155e/0x1d00 fs/netfs/read_retry.c:235 netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371 netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407 netfs_retry_reads+0x155e/0x1d00 fs/netfs/read_retry.c:235 netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371 ... netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407 netfs_retry_reads+0x155e/0x1d00 fs/netfs/read_retry.c:235 netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371 netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407 netfs_retry_reads+0x155e/0x1d00 fs/netfs/read_retry.c:235 netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371 netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407 netfs_dispatch_unbuffered_reads fs/netfs/direct_read.c:103 [inline] netfs_unbuffered_read fs/netfs/direct_read.c:127 [inline] netfs_unbuffered_read_iter_locked+0x12f6/0x19b0 fs/netfs/direct_read.c:221 netfs_unbuffered_read_iter+0xc5/0x100 fs/netfs/direct_read.c:256 v9fs_file_read_iter+0xbf/0x100 fs/9p/vfs_file.c:361 do_iter_readv_writev+0x614/0x7f0 fs/read_write.c:832 vfs_readv+0x4cf/0x890 fs/read_write.c:1025 do_preadv fs/read_write.c:1142 [inline] __do_sys_preadv fs/read_write.c:1192 [inline] __se_sys_preadv fs/read_write.c:1187 [inline] __x64_sys_preadv+0x22d/0x310 fs/read_write.c:1187 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 Fixes: ee4cdf7ba857 ("netfs: Speed up buffered reading") Closes: https://syzkaller.appspot.com/bug?extid=1fc6f64c40a9d143cfb6 Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20241108034020.3695718-1-lizhi.xu@windriver.com/ [1] Link: https://lore.kernel.org/r/20241213135013.2964079-9-dhowells@redhat.com Tested-by: syzbot+885c03ad650731743489@syzkaller.appspotmail.com Suggested-by: Lizhi Xu <lizhi.xu@windriver.com> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Jeff Layton <jlayton@kernel.org> cc: v9fs@lists.linux.dev cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Reported-by: syzbot+885c03ad650731743489@syzkaller.appspotmail.com Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-12-13 13:50:08 +00:00
#define NETFS_SREQ_MADE_PROGRESS 4 /* Set if we transferred at least some data */
#define NETFS_SREQ_ONDEMAND 5 /* Set if it's from on-demand read mode */
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
#define NETFS_SREQ_BOUNDARY 6 /* Set if ends on hard boundary (eg. ceph object) */
#define NETFS_SREQ_HIT_EOF 7 /* Set if short due to EOF */
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
#define NETFS_SREQ_IN_PROGRESS 8 /* Unlocked when the subrequest completes */
#define NETFS_SREQ_NEED_RETRY 9 /* Set if the filesystem requests a retry */
netfs: Work around recursion by abandoning retry if nothing read syzkaller reported recursion with a loop of three calls (netfs_rreq_assess, netfs_retry_reads and netfs_rreq_terminated) hitting the limit of the stack during an unbuffered or direct I/O read. There are a number of issues: (1) There is no limit on the number of retries. (2) A subrequest is supposed to be abandoned if it does not transfer anything (NETFS_SREQ_NO_PROGRESS), but that isn't checked under all circumstances. (3) The actual root cause, which is this: if (atomic_dec_and_test(&rreq->nr_outstanding)) netfs_rreq_terminated(rreq, ...); When we do a retry, we bump the rreq->nr_outstanding counter to prevent the final cleanup phase running before we've finished dispatching the retries. The problem is if we hit 0, we have to do the cleanup phase - but we're in the cleanup phase and end up repeating the retry cycle, hence the recursion. Work around the problem by limiting the number of retries. This is based on Lizhi Xu's patch[1], and makes the following changes: (1) Replace NETFS_SREQ_NO_PROGRESS with NETFS_SREQ_MADE_PROGRESS and make the filesystem set it if it managed to read or write at least one byte of data. Clear this bit before issuing a subrequest. (2) Add a ->retry_count member to the subrequest and increment it any time we do a retry. (3) Remove the NETFS_SREQ_RETRYING flag as it is superfluous with ->retry_count. If the latter is non-zero, we're doing a retry. (4) Abandon a subrequest if retry_count is non-zero and we made no progress. (5) Use ->retry_count in both the write-side and the read-size. [?] Question: Should I set a hard limit on retry_count in both read and write? Say it hits 50, we always abandon it. The problem is that these changes only mitigate the issue. As long as it made at least one byte of progress, the recursion is still an issue. This patch mitigates the problem, but does not fix the underlying cause. I have patches that will do that, but it's an intrusive fix that's currently pending for the next merge window. The oops generated by KASAN looks something like: BUG: TASK stack guard page was hit at ffffc9000482ff48 (stack is ffffc90004830000..ffffc90004838000) Oops: stack guard page: 0000 [#1] PREEMPT SMP KASAN NOPTI ... RIP: 0010:mark_lock+0x25/0xc60 kernel/locking/lockdep.c:4686 ... mark_usage kernel/locking/lockdep.c:4646 [inline] __lock_acquire+0x906/0x3ce0 kernel/locking/lockdep.c:5156 lock_acquire.part.0+0x11b/0x380 kernel/locking/lockdep.c:5825 local_lock_acquire include/linux/local_lock_internal.h:29 [inline] ___slab_alloc+0x123/0x1880 mm/slub.c:3695 __slab_alloc.constprop.0+0x56/0xb0 mm/slub.c:3908 __slab_alloc_node mm/slub.c:3961 [inline] slab_alloc_node mm/slub.c:4122 [inline] kmem_cache_alloc_noprof+0x2a7/0x2f0 mm/slub.c:4141 radix_tree_node_alloc.constprop.0+0x1e8/0x350 lib/radix-tree.c:253 idr_get_free+0x528/0xa40 lib/radix-tree.c:1506 idr_alloc_u32+0x191/0x2f0 lib/idr.c:46 idr_alloc+0xc1/0x130 lib/idr.c:87 p9_tag_alloc+0x394/0x870 net/9p/client.c:321 p9_client_prepare_req+0x19f/0x4d0 net/9p/client.c:644 p9_client_zc_rpc.constprop.0+0x105/0x880 net/9p/client.c:793 p9_client_read_once+0x443/0x820 net/9p/client.c:1570 p9_client_read+0x13f/0x1b0 net/9p/client.c:1534 v9fs_issue_read+0x115/0x310 fs/9p/vfs_addr.c:74 netfs_retry_read_subrequests fs/netfs/read_retry.c:60 [inline] netfs_retry_reads+0x153a/0x1d00 fs/netfs/read_retry.c:232 netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371 netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407 netfs_retry_reads+0x155e/0x1d00 fs/netfs/read_retry.c:235 netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371 netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407 netfs_retry_reads+0x155e/0x1d00 fs/netfs/read_retry.c:235 netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371 ... netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407 netfs_retry_reads+0x155e/0x1d00 fs/netfs/read_retry.c:235 netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371 netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407 netfs_retry_reads+0x155e/0x1d00 fs/netfs/read_retry.c:235 netfs_rreq_assess+0x5d3/0x870 fs/netfs/read_collect.c:371 netfs_rreq_terminated+0xe5/0x110 fs/netfs/read_collect.c:407 netfs_dispatch_unbuffered_reads fs/netfs/direct_read.c:103 [inline] netfs_unbuffered_read fs/netfs/direct_read.c:127 [inline] netfs_unbuffered_read_iter_locked+0x12f6/0x19b0 fs/netfs/direct_read.c:221 netfs_unbuffered_read_iter+0xc5/0x100 fs/netfs/direct_read.c:256 v9fs_file_read_iter+0xbf/0x100 fs/9p/vfs_file.c:361 do_iter_readv_writev+0x614/0x7f0 fs/read_write.c:832 vfs_readv+0x4cf/0x890 fs/read_write.c:1025 do_preadv fs/read_write.c:1142 [inline] __do_sys_preadv fs/read_write.c:1192 [inline] __se_sys_preadv fs/read_write.c:1187 [inline] __x64_sys_preadv+0x22d/0x310 fs/read_write.c:1187 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x250 arch/x86/entry/common.c:83 Fixes: ee4cdf7ba857 ("netfs: Speed up buffered reading") Closes: https://syzkaller.appspot.com/bug?extid=1fc6f64c40a9d143cfb6 Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20241108034020.3695718-1-lizhi.xu@windriver.com/ [1] Link: https://lore.kernel.org/r/20241213135013.2964079-9-dhowells@redhat.com Tested-by: syzbot+885c03ad650731743489@syzkaller.appspotmail.com Suggested-by: Lizhi Xu <lizhi.xu@windriver.com> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Jeff Layton <jlayton@kernel.org> cc: v9fs@lists.linux.dev cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Reported-by: syzbot+885c03ad650731743489@syzkaller.appspotmail.com Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-12-13 13:50:08 +00:00
#define NETFS_SREQ_FAILED 10 /* Set if the subreq failed unretryably */
netfs: Provide readahead and readpage netfs helpers Add a pair of helper functions: (*) netfs_readahead() (*) netfs_readpage() to do the work of handling a readahead or a readpage, where the page(s) that form part of the request may be split between the local cache, the server or just require clearing, and may be single pages and transparent huge pages. This is all handled within the helper. Note that while both will read from the cache if there is data present, only netfs_readahead() will expand the request beyond what it was asked to do, and only netfs_readahead() will write back to the cache. netfs_readpage(), on the other hand, is synchronous and only fetches the page (which might be a THP) it is asked for. The netfs gives the helper parameters from the VM, the cache cookie it wants to use (or NULL) and a table of operations (only one of which is mandatory): (*) expand_readahead() [optional] Called to allow the netfs to request an expansion of a readahead request to meet its own alignment requirements. This is done by changing rreq->start and rreq->len. (*) clamp_length() [optional] Called to allow the netfs to cut down a subrequest to meet its own boundary requirements. If it does this, the helper will generate additional subrequests until the full request is satisfied. (*) is_still_valid() [optional] Called to find out if the data just read from the cache has been invalidated and must be reread from the server. (*) issue_op() [required] Called to ask the netfs to issue a read to the server. The subrequest describes the read. The read request holds information about the file being accessed. The netfs can cache information in rreq->netfs_priv. Upon completion, the netfs should set the error, transferred and can also set FSCACHE_SREQ_CLEAR_TAIL and then call fscache_subreq_terminated(). (*) done() [optional] Called after the pages have been unlocked. The read request is still pinning the file and mapping and may still be pinning pages with PG_fscache. rreq->error indicates any error that has been accumulated. (*) cleanup() [optional] Called when the helper is disposing of a finished read request. This allows the netfs to clear rreq->netfs_priv. Netfs support is enabled with CONFIG_NETFS_SUPPORT=y. It will be built even if CONFIG_FSCACHE=n and in this case much of it should be optimised away, allowing the filesystem to use it even when caching is disabled. Changes: v5: - Comment why netfs_readahead() is putting pages[2]. - Use page_file_mapping() rather than page->mapping[2]. - Use page_index() rather than page->index[2]. - Use set_page_fscache()[3] rather then SetPageFsCache() as this takes an appropriate ref too[4]. v4: - Folded in a kerneldoc comment fix. - Folded in a fix for the error handling in the case that ENOMEM occurs. - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/20210321014202.GF3420@casper.infradead.org/ [2] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/CAHk-=wh+2gbF7XEjYc=HV9w_2uVzVf7vs60BPz0gFA=+pUm3ww@mail.gmail.com/ [4] Link: https://lore.kernel.org/r/160588497406.3465195.18003475695899726222.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118136849.1232039.8923686136144228724.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161032290.2537118.13400578415247339173.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340394873.1303470.6237319335883242536.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539537375.286939.16642940088716990995.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653795430.2770958.4947584573720000554.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789076581.6155.6745849361504760209.stgit@warthog.procyon.org.uk/ # v6
2020-05-13 16:41:20 +00:00
};
enum netfs_io_origin {
NETFS_READAHEAD, /* This read was triggered by readahead */
NETFS_READPAGE, /* This read is a synchronous read */
NETFS_READ_GAPS, /* This read is a synchronous read to fill gaps */
NETFS_READ_SINGLE, /* This read should be treated as a single object */
NETFS_READ_FOR_WRITE, /* This read is to prepare a write */
NETFS_UNBUFFERED_READ, /* This is an unbuffered read */
NETFS_DIO_READ, /* This is a direct I/O read */
NETFS_WRITEBACK, /* This write was triggered by writepages */
NETFS_WRITEBACK_SINGLE, /* This monolithic write was triggered by writepages */
NETFS_WRITETHROUGH, /* This write was made by netfs_perform_write() */
NETFS_UNBUFFERED_WRITE, /* This is an unbuffered write */
NETFS_DIO_WRITE, /* This is a direct I/O write */
NETFS_PGPRIV2_COPY_TO_CACHE, /* [DEPRECATED] This is writing read data to the cache */
nr__netfs_io_origin
} __mode(byte);
netfs: Provide readahead and readpage netfs helpers Add a pair of helper functions: (*) netfs_readahead() (*) netfs_readpage() to do the work of handling a readahead or a readpage, where the page(s) that form part of the request may be split between the local cache, the server or just require clearing, and may be single pages and transparent huge pages. This is all handled within the helper. Note that while both will read from the cache if there is data present, only netfs_readahead() will expand the request beyond what it was asked to do, and only netfs_readahead() will write back to the cache. netfs_readpage(), on the other hand, is synchronous and only fetches the page (which might be a THP) it is asked for. The netfs gives the helper parameters from the VM, the cache cookie it wants to use (or NULL) and a table of operations (only one of which is mandatory): (*) expand_readahead() [optional] Called to allow the netfs to request an expansion of a readahead request to meet its own alignment requirements. This is done by changing rreq->start and rreq->len. (*) clamp_length() [optional] Called to allow the netfs to cut down a subrequest to meet its own boundary requirements. If it does this, the helper will generate additional subrequests until the full request is satisfied. (*) is_still_valid() [optional] Called to find out if the data just read from the cache has been invalidated and must be reread from the server. (*) issue_op() [required] Called to ask the netfs to issue a read to the server. The subrequest describes the read. The read request holds information about the file being accessed. The netfs can cache information in rreq->netfs_priv. Upon completion, the netfs should set the error, transferred and can also set FSCACHE_SREQ_CLEAR_TAIL and then call fscache_subreq_terminated(). (*) done() [optional] Called after the pages have been unlocked. The read request is still pinning the file and mapping and may still be pinning pages with PG_fscache. rreq->error indicates any error that has been accumulated. (*) cleanup() [optional] Called when the helper is disposing of a finished read request. This allows the netfs to clear rreq->netfs_priv. Netfs support is enabled with CONFIG_NETFS_SUPPORT=y. It will be built even if CONFIG_FSCACHE=n and in this case much of it should be optimised away, allowing the filesystem to use it even when caching is disabled. Changes: v5: - Comment why netfs_readahead() is putting pages[2]. - Use page_file_mapping() rather than page->mapping[2]. - Use page_index() rather than page->index[2]. - Use set_page_fscache()[3] rather then SetPageFsCache() as this takes an appropriate ref too[4]. v4: - Folded in a kerneldoc comment fix. - Folded in a fix for the error handling in the case that ENOMEM occurs. - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/20210321014202.GF3420@casper.infradead.org/ [2] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/CAHk-=wh+2gbF7XEjYc=HV9w_2uVzVf7vs60BPz0gFA=+pUm3ww@mail.gmail.com/ [4] Link: https://lore.kernel.org/r/160588497406.3465195.18003475695899726222.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118136849.1232039.8923686136144228724.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161032290.2537118.13400578415247339173.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340394873.1303470.6237319335883242536.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539537375.286939.16642940088716990995.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653795430.2770958.4947584573720000554.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789076581.6155.6745849361504760209.stgit@warthog.procyon.org.uk/ # v6
2020-05-13 16:41:20 +00:00
/*
* Descriptor for an I/O helper request. This is used to make multiple I/O
* operations to a variety of data stores and then stitch the result together.
netfs: Provide readahead and readpage netfs helpers Add a pair of helper functions: (*) netfs_readahead() (*) netfs_readpage() to do the work of handling a readahead or a readpage, where the page(s) that form part of the request may be split between the local cache, the server or just require clearing, and may be single pages and transparent huge pages. This is all handled within the helper. Note that while both will read from the cache if there is data present, only netfs_readahead() will expand the request beyond what it was asked to do, and only netfs_readahead() will write back to the cache. netfs_readpage(), on the other hand, is synchronous and only fetches the page (which might be a THP) it is asked for. The netfs gives the helper parameters from the VM, the cache cookie it wants to use (or NULL) and a table of operations (only one of which is mandatory): (*) expand_readahead() [optional] Called to allow the netfs to request an expansion of a readahead request to meet its own alignment requirements. This is done by changing rreq->start and rreq->len. (*) clamp_length() [optional] Called to allow the netfs to cut down a subrequest to meet its own boundary requirements. If it does this, the helper will generate additional subrequests until the full request is satisfied. (*) is_still_valid() [optional] Called to find out if the data just read from the cache has been invalidated and must be reread from the server. (*) issue_op() [required] Called to ask the netfs to issue a read to the server. The subrequest describes the read. The read request holds information about the file being accessed. The netfs can cache information in rreq->netfs_priv. Upon completion, the netfs should set the error, transferred and can also set FSCACHE_SREQ_CLEAR_TAIL and then call fscache_subreq_terminated(). (*) done() [optional] Called after the pages have been unlocked. The read request is still pinning the file and mapping and may still be pinning pages with PG_fscache. rreq->error indicates any error that has been accumulated. (*) cleanup() [optional] Called when the helper is disposing of a finished read request. This allows the netfs to clear rreq->netfs_priv. Netfs support is enabled with CONFIG_NETFS_SUPPORT=y. It will be built even if CONFIG_FSCACHE=n and in this case much of it should be optimised away, allowing the filesystem to use it even when caching is disabled. Changes: v5: - Comment why netfs_readahead() is putting pages[2]. - Use page_file_mapping() rather than page->mapping[2]. - Use page_index() rather than page->index[2]. - Use set_page_fscache()[3] rather then SetPageFsCache() as this takes an appropriate ref too[4]. v4: - Folded in a kerneldoc comment fix. - Folded in a fix for the error handling in the case that ENOMEM occurs. - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/20210321014202.GF3420@casper.infradead.org/ [2] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/CAHk-=wh+2gbF7XEjYc=HV9w_2uVzVf7vs60BPz0gFA=+pUm3ww@mail.gmail.com/ [4] Link: https://lore.kernel.org/r/160588497406.3465195.18003475695899726222.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118136849.1232039.8923686136144228724.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161032290.2537118.13400578415247339173.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340394873.1303470.6237319335883242536.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539537375.286939.16642940088716990995.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653795430.2770958.4947584573720000554.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789076581.6155.6745849361504760209.stgit@warthog.procyon.org.uk/ # v6
2020-05-13 16:41:20 +00:00
*/
struct netfs_io_request {
union {
netfs: Fix the request's work item to not require a ref When the netfs_io_request struct's work item is queued, it must be supplied with a ref to the work item struct to prevent it being deallocated whilst on the queue or whilst it is being processed. This is tricky to manage as we have to get a ref before we try and queue it and then we may find it's already queued and is thus already holding a ref - in which case we have to try and get rid of the ref again. The problem comes if we're in BH or IRQ context and need to drop the ref: if netfs_put_request() reduces the count to 0, we have to do the cleanup - but the cleanup may need to wait. Fix this by adding a new work item to the request, ->cleanup_work, and dispatching that when the refcount hits zero. That can then synchronously cancel any outstanding work on the main work item before doing the cleanup. Adding a new work item also deals with another problem upstream where it's sometimes changing the work func in the put function and requeuing it - which has occasionally in the past caused the cleanup to happen incorrectly. As a bonus, this allows us to get rid of the 'was_async' parameter from a bunch of functions. This indicated whether the put function might not be permitted to sleep. Fixes: 3d3c95046742 ("netfs: Provide readahead and readpage netfs helpers") Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/20250519090707.2848510-4-dhowells@redhat.com cc: Paulo Alcantara <pc@manguebit.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Steve French <stfrench@microsoft.com> cc: linux-cifs@vger.kernel.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-05-19 09:07:03 +00:00
struct work_struct cleanup_work; /* Deferred cleanup work */
struct rcu_head rcu;
};
netfs: Fix the request's work item to not require a ref When the netfs_io_request struct's work item is queued, it must be supplied with a ref to the work item struct to prevent it being deallocated whilst on the queue or whilst it is being processed. This is tricky to manage as we have to get a ref before we try and queue it and then we may find it's already queued and is thus already holding a ref - in which case we have to try and get rid of the ref again. The problem comes if we're in BH or IRQ context and need to drop the ref: if netfs_put_request() reduces the count to 0, we have to do the cleanup - but the cleanup may need to wait. Fix this by adding a new work item to the request, ->cleanup_work, and dispatching that when the refcount hits zero. That can then synchronously cancel any outstanding work on the main work item before doing the cleanup. Adding a new work item also deals with another problem upstream where it's sometimes changing the work func in the put function and requeuing it - which has occasionally in the past caused the cleanup to happen incorrectly. As a bonus, this allows us to get rid of the 'was_async' parameter from a bunch of functions. This indicated whether the put function might not be permitted to sleep. Fixes: 3d3c95046742 ("netfs: Provide readahead and readpage netfs helpers") Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/20250519090707.2848510-4-dhowells@redhat.com cc: Paulo Alcantara <pc@manguebit.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Steve French <stfrench@microsoft.com> cc: linux-cifs@vger.kernel.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-05-19 09:07:03 +00:00
struct work_struct work; /* Result collector work */
netfs: Provide readahead and readpage netfs helpers Add a pair of helper functions: (*) netfs_readahead() (*) netfs_readpage() to do the work of handling a readahead or a readpage, where the page(s) that form part of the request may be split between the local cache, the server or just require clearing, and may be single pages and transparent huge pages. This is all handled within the helper. Note that while both will read from the cache if there is data present, only netfs_readahead() will expand the request beyond what it was asked to do, and only netfs_readahead() will write back to the cache. netfs_readpage(), on the other hand, is synchronous and only fetches the page (which might be a THP) it is asked for. The netfs gives the helper parameters from the VM, the cache cookie it wants to use (or NULL) and a table of operations (only one of which is mandatory): (*) expand_readahead() [optional] Called to allow the netfs to request an expansion of a readahead request to meet its own alignment requirements. This is done by changing rreq->start and rreq->len. (*) clamp_length() [optional] Called to allow the netfs to cut down a subrequest to meet its own boundary requirements. If it does this, the helper will generate additional subrequests until the full request is satisfied. (*) is_still_valid() [optional] Called to find out if the data just read from the cache has been invalidated and must be reread from the server. (*) issue_op() [required] Called to ask the netfs to issue a read to the server. The subrequest describes the read. The read request holds information about the file being accessed. The netfs can cache information in rreq->netfs_priv. Upon completion, the netfs should set the error, transferred and can also set FSCACHE_SREQ_CLEAR_TAIL and then call fscache_subreq_terminated(). (*) done() [optional] Called after the pages have been unlocked. The read request is still pinning the file and mapping and may still be pinning pages with PG_fscache. rreq->error indicates any error that has been accumulated. (*) cleanup() [optional] Called when the helper is disposing of a finished read request. This allows the netfs to clear rreq->netfs_priv. Netfs support is enabled with CONFIG_NETFS_SUPPORT=y. It will be built even if CONFIG_FSCACHE=n and in this case much of it should be optimised away, allowing the filesystem to use it even when caching is disabled. Changes: v5: - Comment why netfs_readahead() is putting pages[2]. - Use page_file_mapping() rather than page->mapping[2]. - Use page_index() rather than page->index[2]. - Use set_page_fscache()[3] rather then SetPageFsCache() as this takes an appropriate ref too[4]. v4: - Folded in a kerneldoc comment fix. - Folded in a fix for the error handling in the case that ENOMEM occurs. - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/20210321014202.GF3420@casper.infradead.org/ [2] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/CAHk-=wh+2gbF7XEjYc=HV9w_2uVzVf7vs60BPz0gFA=+pUm3ww@mail.gmail.com/ [4] Link: https://lore.kernel.org/r/160588497406.3465195.18003475695899726222.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118136849.1232039.8923686136144228724.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161032290.2537118.13400578415247339173.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340394873.1303470.6237319335883242536.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539537375.286939.16642940088716990995.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653795430.2770958.4947584573720000554.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789076581.6155.6745849361504760209.stgit@warthog.procyon.org.uk/ # v6
2020-05-13 16:41:20 +00:00
struct inode *inode; /* The file being accessed */
struct address_space *mapping; /* The mapping being accessed */
struct kiocb *iocb; /* AIO completion vector */
netfs: Define an interface to talk to a cache Add an interface to the netfs helper library for reading data from the cache instead of downloading it from the server and support for writing data just downloaded or cleared to the cache. The API passes an iov_iter to the cache read/write routines to indicate the data/buffer to be used. This is done using the ITER_XARRAY type to provide direct access to the netfs inode's pagecache. When the netfs's ->begin_cache_operation() method is called, this must fill in the cache_resources in the netfs_read_request struct, including the netfs_cache_ops used by the helper lib to talk to the cache. The helper lib does not directly access the cache. Changes: v6: - Call trace_netfs_read() after beginning the cache op so that the cookie debug ID can be logged[3]. - Don't record the error from writing to the cache. We don't want to pass it back to the netfs[4]. - Fix copy-to-cache subreq amalgamation to not round up as it goes along otherwise it overcalculates the length of the write[5]. v5: - Use end_page_fscache() rather than unlock_page_fscache()[2]. v4: - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). - Add missing inc of netfs_n_rh_read stat. - Move initial definition of fscache_begin_read_operation() elsewhere. - Need to call op->begin_cache_operation() from netfs_write_begin(). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [2] Link: https://lore.kernel.org/r/161781045123.463527.14533348855710902201.stgit@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/161781046256.463527.18158681600085556192.stgit@warthog.procyon.org.uk/ [4] Link: https://lore.kernel.org/r/161781047695.463527.7463536103593997492.stgit@warthog.procyon.org.uk/ [5] Link: https://lore.kernel.org/r/161118141321.1232039.8296910406755622458.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161036700.2537118.11170748455436854978.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340399569.1303470.1138884774643385730.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539542874.286939.13337898213448136687.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653799826.2770958.9015430297426331950.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789081462.6155.3853904866933313256.stgit@warthog.procyon.org.uk/ # v6
2020-02-06 14:22:24 +00:00
struct netfs_cache_resources cache_resources;
netfs: Change the read result collector to only use one work item Change the way netfslib collects read results to do all the collection for a particular read request using a single work item that walks along the subrequest queue as subrequests make progress or complete, unlocking folios progressively rather than doing the unlock in parallel as parallel requests come in. The code is remodelled to be more like the write-side code, though only using a single stream. This makes it more directly comparable and thus easier to duplicate fixes between the two sides. This has a number of advantages: (1) It's simpler. There doesn't need to be a complex donation mechanism to handle mismatches between the size and alignment of subrequests and folios. The collector unlocks folios as the subrequests covering each complete. (2) It should cause less scheduler overhead as there's a single work item in play unlocking pages in parallel when a read gets split up into a lot of subrequests instead of one per subrequest. Whilst the parallellism is nice in theory, in practice, the vast majority of loads are sequential reads of the whole file, so committing a bunch of threads to unlocking folios out of order doesn't help in those cases. (3) It should make it easier to implement content decryption. A folio cannot be decrypted until all the requests that contribute to it have completed - and, again, most loads are sequential and so, most of the time, we want to begin decryption sequentially (though it's great if the decryption can happen in parallel). There is a disadvantage in that we're losing the ability to decrypt and unlock things on an as-things-arrive basis which may affect some applications. Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20241216204124.3752367-28-dhowells@redhat.com cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-12-16 20:41:17 +00:00
struct netfs_io_request *copy_to_cache; /* Request to write just-read data to the cache */
#ifdef CONFIG_PROC_FS
struct list_head proc_link; /* Link in netfs_iorequests */
#endif
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
struct netfs_io_stream io_streams[2]; /* Streams of parallel I/O operations */
#define NR_IO_STREAMS 2 //wreq->nr_io_streams
struct netfs_group *group; /* Writeback group being written back */
struct rolling_buffer buffer; /* Unencrypted buffer */
#define NETFS_ROLLBUF_PUT_MARK ROLLBUF_MARK_1
#define NETFS_ROLLBUF_PAGECACHE_MARK ROLLBUF_MARK_2
netfs: Change the read result collector to only use one work item Change the way netfslib collects read results to do all the collection for a particular read request using a single work item that walks along the subrequest queue as subrequests make progress or complete, unlocking folios progressively rather than doing the unlock in parallel as parallel requests come in. The code is remodelled to be more like the write-side code, though only using a single stream. This makes it more directly comparable and thus easier to duplicate fixes between the two sides. This has a number of advantages: (1) It's simpler. There doesn't need to be a complex donation mechanism to handle mismatches between the size and alignment of subrequests and folios. The collector unlocks folios as the subrequests covering each complete. (2) It should cause less scheduler overhead as there's a single work item in play unlocking pages in parallel when a read gets split up into a lot of subrequests instead of one per subrequest. Whilst the parallellism is nice in theory, in practice, the vast majority of loads are sequential reads of the whole file, so committing a bunch of threads to unlocking folios out of order doesn't help in those cases. (3) It should make it easier to implement content decryption. A folio cannot be decrypted until all the requests that contribute to it have completed - and, again, most loads are sequential and so, most of the time, we want to begin decryption sequentially (though it's great if the decryption can happen in parallel). There is a disadvantage in that we're losing the ability to decrypt and unlock things on an as-things-arrive basis which may affect some applications. Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20241216204124.3752367-28-dhowells@redhat.com cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-12-16 20:41:17 +00:00
wait_queue_head_t waitq; /* Processor waiter */
netfs: Provide readahead and readpage netfs helpers Add a pair of helper functions: (*) netfs_readahead() (*) netfs_readpage() to do the work of handling a readahead or a readpage, where the page(s) that form part of the request may be split between the local cache, the server or just require clearing, and may be single pages and transparent huge pages. This is all handled within the helper. Note that while both will read from the cache if there is data present, only netfs_readahead() will expand the request beyond what it was asked to do, and only netfs_readahead() will write back to the cache. netfs_readpage(), on the other hand, is synchronous and only fetches the page (which might be a THP) it is asked for. The netfs gives the helper parameters from the VM, the cache cookie it wants to use (or NULL) and a table of operations (only one of which is mandatory): (*) expand_readahead() [optional] Called to allow the netfs to request an expansion of a readahead request to meet its own alignment requirements. This is done by changing rreq->start and rreq->len. (*) clamp_length() [optional] Called to allow the netfs to cut down a subrequest to meet its own boundary requirements. If it does this, the helper will generate additional subrequests until the full request is satisfied. (*) is_still_valid() [optional] Called to find out if the data just read from the cache has been invalidated and must be reread from the server. (*) issue_op() [required] Called to ask the netfs to issue a read to the server. The subrequest describes the read. The read request holds information about the file being accessed. The netfs can cache information in rreq->netfs_priv. Upon completion, the netfs should set the error, transferred and can also set FSCACHE_SREQ_CLEAR_TAIL and then call fscache_subreq_terminated(). (*) done() [optional] Called after the pages have been unlocked. The read request is still pinning the file and mapping and may still be pinning pages with PG_fscache. rreq->error indicates any error that has been accumulated. (*) cleanup() [optional] Called when the helper is disposing of a finished read request. This allows the netfs to clear rreq->netfs_priv. Netfs support is enabled with CONFIG_NETFS_SUPPORT=y. It will be built even if CONFIG_FSCACHE=n and in this case much of it should be optimised away, allowing the filesystem to use it even when caching is disabled. Changes: v5: - Comment why netfs_readahead() is putting pages[2]. - Use page_file_mapping() rather than page->mapping[2]. - Use page_index() rather than page->index[2]. - Use set_page_fscache()[3] rather then SetPageFsCache() as this takes an appropriate ref too[4]. v4: - Folded in a kerneldoc comment fix. - Folded in a fix for the error handling in the case that ENOMEM occurs. - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/20210321014202.GF3420@casper.infradead.org/ [2] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/CAHk-=wh+2gbF7XEjYc=HV9w_2uVzVf7vs60BPz0gFA=+pUm3ww@mail.gmail.com/ [4] Link: https://lore.kernel.org/r/160588497406.3465195.18003475695899726222.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118136849.1232039.8923686136144228724.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161032290.2537118.13400578415247339173.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340394873.1303470.6237319335883242536.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539537375.286939.16642940088716990995.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653795430.2770958.4947584573720000554.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789076581.6155.6745849361504760209.stgit@warthog.procyon.org.uk/ # v6
2020-05-13 16:41:20 +00:00
void *netfs_priv; /* Private data for the netfs */
void *netfs_priv2; /* Private data for the netfs */
struct bio_vec *direct_bv; /* DIO buffer list (when handling iovec-iter) */
unsigned long long submitted; /* Amount submitted for I/O so far */
unsigned long long len; /* Length of the request */
size_t transferred; /* Amount to be indicated as transferred */
long error; /* 0 or error that occurred */
unsigned long long i_size; /* Size of the file */
unsigned long long start; /* Start position */
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
atomic64_t issued_to; /* Write issuer folio cursor */
unsigned long long collected_to; /* Point we've collected to */
unsigned long long cleaned_to; /* Position we've cleaned folios to */
netfs: Change the read result collector to only use one work item Change the way netfslib collects read results to do all the collection for a particular read request using a single work item that walks along the subrequest queue as subrequests make progress or complete, unlocking folios progressively rather than doing the unlock in parallel as parallel requests come in. The code is remodelled to be more like the write-side code, though only using a single stream. This makes it more directly comparable and thus easier to duplicate fixes between the two sides. This has a number of advantages: (1) It's simpler. There doesn't need to be a complex donation mechanism to handle mismatches between the size and alignment of subrequests and folios. The collector unlocks folios as the subrequests covering each complete. (2) It should cause less scheduler overhead as there's a single work item in play unlocking pages in parallel when a read gets split up into a lot of subrequests instead of one per subrequest. Whilst the parallellism is nice in theory, in practice, the vast majority of loads are sequential reads of the whole file, so committing a bunch of threads to unlocking folios out of order doesn't help in those cases. (3) It should make it easier to implement content decryption. A folio cannot be decrypted until all the requests that contribute to it have completed - and, again, most loads are sequential and so, most of the time, we want to begin decryption sequentially (though it's great if the decryption can happen in parallel). There is a disadvantage in that we're losing the ability to decrypt and unlock things on an as-things-arrive basis which may affect some applications. Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20241216204124.3752367-28-dhowells@redhat.com cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-12-16 20:41:17 +00:00
unsigned long long abandon_to; /* Position to abandon folios to */
netfs, 9p, afs, ceph: Use folios Convert the netfs helper library to use folios throughout, convert the 9p and afs filesystems to use folios in their file I/O paths and convert the ceph filesystem to use just enough folios to compile. With these changes, afs passes -g quick xfstests. Changes ======= ver #5: - Got rid of folio_end{io,_read,_write}() and inlined the stuff it does instead (Willy decided he didn't want this after all). ver #4: - Fixed a bug in afs_redirty_page() whereby it didn't set the next page index in the loop and returned too early. - Simplified a check in v9fs_vfs_write_folio_locked()[1]. - Undid a change to afs_symlink_readpage()[1]. - Used offset_in_folio() in afs_write_end()[1]. - Changed from using page_endio() to folio_end{io,_read,_write}()[1]. ver #2: - Add 9p foliation. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dominique Martinet <asmadeus@codewreck.org> Tested-by: kafs-testing@auristor.com cc: Matthew Wilcox (Oracle) <willy@infradead.org> cc: Marc Dionne <marc.dionne@auristor.com> cc: Ilya Dryomov <idryomov@gmail.com> cc: Dominique Martinet <asmadeus@codewreck.org> cc: v9fs-developer@lists.sourceforge.net cc: linux-afs@lists.infradead.org cc: ceph-devel@vger.kernel.org cc: linux-cachefs@redhat.com Link: https://lore.kernel.org/r/YYKa3bfQZxK5/wDN@casper.infradead.org/ [1] Link: https://lore.kernel.org/r/2408234.1628687271@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/162877311459.3085614.10601478228012245108.stgit@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/162981153551.1901565.3124454657133703341.stgit@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/163005745264.2472992.9852048135392188995.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/163584187452.4023316.500389675405550116.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/163649328026.309189.1124218109373941936.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/163657852454.834781.9265101983152100556.stgit@warthog.procyon.org.uk/ # v5
2021-08-11 08:49:13 +00:00
pgoff_t no_unlock_folio; /* Don't unlock this folio after read */
unsigned int direct_bv_count; /* Number of elements in direct_bv[] */
unsigned int debug_id;
unsigned int rsize; /* Maximum read size (0 for none) */
unsigned int wsize; /* Maximum write size (0 for none) */
atomic_t subreq_counter; /* Next subreq->debug_index */
unsigned int nr_group_rel; /* Number of refs to release on ->group */
spinlock_t lock; /* Lock for queuing subreqs */
netfs: Change the read result collector to only use one work item Change the way netfslib collects read results to do all the collection for a particular read request using a single work item that walks along the subrequest queue as subrequests make progress or complete, unlocking folios progressively rather than doing the unlock in parallel as parallel requests come in. The code is remodelled to be more like the write-side code, though only using a single stream. This makes it more directly comparable and thus easier to duplicate fixes between the two sides. This has a number of advantages: (1) It's simpler. There doesn't need to be a complex donation mechanism to handle mismatches between the size and alignment of subrequests and folios. The collector unlocks folios as the subrequests covering each complete. (2) It should cause less scheduler overhead as there's a single work item in play unlocking pages in parallel when a read gets split up into a lot of subrequests instead of one per subrequest. Whilst the parallellism is nice in theory, in practice, the vast majority of loads are sequential reads of the whole file, so committing a bunch of threads to unlocking folios out of order doesn't help in those cases. (3) It should make it easier to implement content decryption. A folio cannot be decrypted until all the requests that contribute to it have completed - and, again, most loads are sequential and so, most of the time, we want to begin decryption sequentially (though it's great if the decryption can happen in parallel). There is a disadvantage in that we're losing the ability to decrypt and unlock things on an as-things-arrive basis which may affect some applications. Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/20241216204124.3752367-28-dhowells@redhat.com cc: Jeff Layton <jlayton@kernel.org> cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-12-16 20:41:17 +00:00
unsigned char front_folio_order; /* Order (size) of front folio */
enum netfs_io_origin origin; /* Origin of the request */
bool direct_bv_unpin; /* T if direct_bv[] must be unpinned */
refcount_t ref;
netfs: Provide readahead and readpage netfs helpers Add a pair of helper functions: (*) netfs_readahead() (*) netfs_readpage() to do the work of handling a readahead or a readpage, where the page(s) that form part of the request may be split between the local cache, the server or just require clearing, and may be single pages and transparent huge pages. This is all handled within the helper. Note that while both will read from the cache if there is data present, only netfs_readahead() will expand the request beyond what it was asked to do, and only netfs_readahead() will write back to the cache. netfs_readpage(), on the other hand, is synchronous and only fetches the page (which might be a THP) it is asked for. The netfs gives the helper parameters from the VM, the cache cookie it wants to use (or NULL) and a table of operations (only one of which is mandatory): (*) expand_readahead() [optional] Called to allow the netfs to request an expansion of a readahead request to meet its own alignment requirements. This is done by changing rreq->start and rreq->len. (*) clamp_length() [optional] Called to allow the netfs to cut down a subrequest to meet its own boundary requirements. If it does this, the helper will generate additional subrequests until the full request is satisfied. (*) is_still_valid() [optional] Called to find out if the data just read from the cache has been invalidated and must be reread from the server. (*) issue_op() [required] Called to ask the netfs to issue a read to the server. The subrequest describes the read. The read request holds information about the file being accessed. The netfs can cache information in rreq->netfs_priv. Upon completion, the netfs should set the error, transferred and can also set FSCACHE_SREQ_CLEAR_TAIL and then call fscache_subreq_terminated(). (*) done() [optional] Called after the pages have been unlocked. The read request is still pinning the file and mapping and may still be pinning pages with PG_fscache. rreq->error indicates any error that has been accumulated. (*) cleanup() [optional] Called when the helper is disposing of a finished read request. This allows the netfs to clear rreq->netfs_priv. Netfs support is enabled with CONFIG_NETFS_SUPPORT=y. It will be built even if CONFIG_FSCACHE=n and in this case much of it should be optimised away, allowing the filesystem to use it even when caching is disabled. Changes: v5: - Comment why netfs_readahead() is putting pages[2]. - Use page_file_mapping() rather than page->mapping[2]. - Use page_index() rather than page->index[2]. - Use set_page_fscache()[3] rather then SetPageFsCache() as this takes an appropriate ref too[4]. v4: - Folded in a kerneldoc comment fix. - Folded in a fix for the error handling in the case that ENOMEM occurs. - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/20210321014202.GF3420@casper.infradead.org/ [2] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/CAHk-=wh+2gbF7XEjYc=HV9w_2uVzVf7vs60BPz0gFA=+pUm3ww@mail.gmail.com/ [4] Link: https://lore.kernel.org/r/160588497406.3465195.18003475695899726222.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118136849.1232039.8923686136144228724.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161032290.2537118.13400578415247339173.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340394873.1303470.6237319335883242536.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539537375.286939.16642940088716990995.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653795430.2770958.4947584573720000554.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789076581.6155.6745849361504760209.stgit@warthog.procyon.org.uk/ # v6
2020-05-13 16:41:20 +00:00
unsigned long flags;
#define NETFS_RREQ_IN_PROGRESS 0 /* Unlocked when the request completes (has ref) */
#define NETFS_RREQ_ALL_QUEUED 1 /* All subreqs are now queued */
#define NETFS_RREQ_PAUSE 2 /* Pause subrequest generation */
#define NETFS_RREQ_FAILED 3 /* The request failed */
#define NETFS_RREQ_RETRYING 4 /* Set if we're in the retry path */
#define NETFS_RREQ_SHORT_TRANSFER 5 /* Set if we have a short transfer */
#define NETFS_RREQ_OFFLOAD_COLLECTION 8 /* Offload collection to workqueue */
#define NETFS_RREQ_NO_UNLOCK_FOLIO 9 /* Don't unlock no_unlock_folio on completion */
#define NETFS_RREQ_FOLIO_COPY_TO_CACHE 10 /* Copy current folio to cache from read */
#define NETFS_RREQ_UPLOAD_TO_SERVER 11 /* Need to write to the server */
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
#define NETFS_RREQ_USE_IO_ITER 12 /* Use ->io_iter rather than ->i_pages */
netfs: Replace PG_fscache by setting folio->private and marking dirty When dirty data is being written to the cache, setting/waiting on/clearing the fscache flag is always done in tandem with setting/waiting on/clearing the writeback flag. The netfslib buffered write routines wait on and set both flags and the write request cleanup clears both flags, so the fscache flag is almost superfluous. The reason it isn't superfluous is because the fscache flag is also used to indicate that data just read from the server is being written to the cache. The flag is used to prevent a race involving overlapping direct-I/O writes to the cache. Change this to indicate that a page is in need of being copied to the cache by placing a magic value in folio->private and marking the folios dirty. Then when the writeback code sees a folio marked in this way, it only writes it to the cache and not to the server. If a folio that has this magic value set is modified, the value is just replaced and the folio will then be uplodaded too. With this, PG_fscache is no longer required by the netfslib core, 9p and afs. Ceph and nfs, however, still need to use the old PG_fscache-based tracking. To deal with this, a flag, NETFS_ICTX_USE_PGPRIV2, now has to be set on the flags in the netfs_inode struct for those filesystems. This reenables the use of PG_fscache in that inode. 9p and afs use the netfslib write helpers so get switched over; cifs, for the moment, does page-by-page manual access to the cache, so doesn't use PG_fscache and is unaffected. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Matthew Wilcox (Oracle) <willy@infradead.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Ilya Dryomov <idryomov@gmail.com> cc: Xiubo Li <xiubli@redhat.com> cc: Steve French <sfrench@samba.org> cc: Paulo Alcantara <pc@manguebit.com> cc: Ronnie Sahlberg <ronniesahlberg@gmail.com> cc: Shyam Prasad N <sprasad@microsoft.com> cc: Tom Talpey <tom@talpey.com> cc: Bharath SM <bharathsm@microsoft.com> cc: Trond Myklebust <trond.myklebust@hammerspace.com> cc: Anna Schumaker <anna@kernel.org> cc: netfs@lists.linux.dev cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: ceph-devel@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: linux-nfs@vger.kernel.org cc: linux-fsdevel@vger.kernel.org cc: linux-mm@kvack.org
2024-03-19 10:00:09 +00:00
#define NETFS_RREQ_USE_PGPRIV2 31 /* [DEPRECATED] Use PG_private_2 to mark
* write to cache on read */
const struct netfs_request_ops *netfs_ops;
netfs: Provide readahead and readpage netfs helpers Add a pair of helper functions: (*) netfs_readahead() (*) netfs_readpage() to do the work of handling a readahead or a readpage, where the page(s) that form part of the request may be split between the local cache, the server or just require clearing, and may be single pages and transparent huge pages. This is all handled within the helper. Note that while both will read from the cache if there is data present, only netfs_readahead() will expand the request beyond what it was asked to do, and only netfs_readahead() will write back to the cache. netfs_readpage(), on the other hand, is synchronous and only fetches the page (which might be a THP) it is asked for. The netfs gives the helper parameters from the VM, the cache cookie it wants to use (or NULL) and a table of operations (only one of which is mandatory): (*) expand_readahead() [optional] Called to allow the netfs to request an expansion of a readahead request to meet its own alignment requirements. This is done by changing rreq->start and rreq->len. (*) clamp_length() [optional] Called to allow the netfs to cut down a subrequest to meet its own boundary requirements. If it does this, the helper will generate additional subrequests until the full request is satisfied. (*) is_still_valid() [optional] Called to find out if the data just read from the cache has been invalidated and must be reread from the server. (*) issue_op() [required] Called to ask the netfs to issue a read to the server. The subrequest describes the read. The read request holds information about the file being accessed. The netfs can cache information in rreq->netfs_priv. Upon completion, the netfs should set the error, transferred and can also set FSCACHE_SREQ_CLEAR_TAIL and then call fscache_subreq_terminated(). (*) done() [optional] Called after the pages have been unlocked. The read request is still pinning the file and mapping and may still be pinning pages with PG_fscache. rreq->error indicates any error that has been accumulated. (*) cleanup() [optional] Called when the helper is disposing of a finished read request. This allows the netfs to clear rreq->netfs_priv. Netfs support is enabled with CONFIG_NETFS_SUPPORT=y. It will be built even if CONFIG_FSCACHE=n and in this case much of it should be optimised away, allowing the filesystem to use it even when caching is disabled. Changes: v5: - Comment why netfs_readahead() is putting pages[2]. - Use page_file_mapping() rather than page->mapping[2]. - Use page_index() rather than page->index[2]. - Use set_page_fscache()[3] rather then SetPageFsCache() as this takes an appropriate ref too[4]. v4: - Folded in a kerneldoc comment fix. - Folded in a fix for the error handling in the case that ENOMEM occurs. - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/20210321014202.GF3420@casper.infradead.org/ [2] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/CAHk-=wh+2gbF7XEjYc=HV9w_2uVzVf7vs60BPz0gFA=+pUm3ww@mail.gmail.com/ [4] Link: https://lore.kernel.org/r/160588497406.3465195.18003475695899726222.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118136849.1232039.8923686136144228724.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161032290.2537118.13400578415247339173.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340394873.1303470.6237319335883242536.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539537375.286939.16642940088716990995.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653795430.2770958.4947584573720000554.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789076581.6155.6745849361504760209.stgit@warthog.procyon.org.uk/ # v6
2020-05-13 16:41:20 +00:00
};
/*
* Operations the network filesystem can/must provide to the helpers.
*/
struct netfs_request_ops {
mempool_t *request_pool;
mempool_t *subrequest_pool;
int (*init_request)(struct netfs_io_request *rreq, struct file *file);
void (*free_request)(struct netfs_io_request *rreq);
void (*free_subrequest)(struct netfs_io_subrequest *rreq);
/* Read request handling */
void (*expand_readahead)(struct netfs_io_request *rreq);
int (*prepare_read)(struct netfs_io_subrequest *subreq);
void (*issue_read)(struct netfs_io_subrequest *subreq);
bool (*is_still_valid)(struct netfs_io_request *rreq);
netfs: Add write_begin helper Add a helper to do the pre-reading work for the netfs write_begin address space op. Changes v6: - Fixed a missing rreq put in netfs_write_begin()[3]. - Use DEFINE_READAHEAD()[4]. v5: - Made the wait for PG_fscache in netfs_write_begin() killable[2]. v4: - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [2] Link: https://lore.kernel.org/r/161781042127.463527.9154479794406046987.stgit@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/1234933.1617886271@warthog.procyon.org.uk/ [4] Link: https://lore.kernel.org/r/160588543960.3465195.2792938973035886168.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118140165.1232039.16418853874312234477.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161035539.2537118.15674887534950908530.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340398368.1303470.11242918276563276090.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539541541.286939.1889738674057013729.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653798616.2770958.17213315845968485563.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789080530.6155.1011847312392330491.stgit@warthog.procyon.org.uk/ # v6
2020-09-22 10:06:07 +00:00
int (*check_write_begin)(struct file *file, loff_t pos, unsigned len,
struct folio **foliop, void **_fsdata);
void (*done)(struct netfs_io_request *rreq);
/* Modification handling */
void (*update_i_size)(struct inode *inode, loff_t i_size);
cifs: Implement netfslib hooks Provide implementation of the netfslib hooks that will be used by netfslib to ask cifs to set up and perform operations. Of particular note are (*) cifs_clamp_length() - This is used to negotiate the size of the next subrequest in a read request, taking into account the credit available and the rsize. The credits are attached to the subrequest. (*) cifs_req_issue_read() - This is used to issue a subrequest that has been set up and clamped. (*) cifs_prepare_write() - This prepares to fill a subrequest by picking a channel, reopening the file and requesting credits so that we can set the maximum size of the subrequest and also sets the maximum number of segments if we're doing RDMA. (*) cifs_issue_write() - This releases any unneeded credits and issues an asynchronous data write for the contiguous slice of file covered by the subrequest. This should possibly be folded in to all ->async_writev() ops and that called directly. (*) cifs_begin_writeback() - This gets the cached writable handle through which we do writeback (this does not affect writethrough, unbuffered or direct writes). At this point, cifs is not wired up to actually *use* netfslib; that will be done in a subsequent patch. Signed-off-by: David Howells <dhowells@redhat.com> cc: Steve French <sfrench@samba.org> cc: Shyam Prasad N <nspmangalore@gmail.com> cc: Rohith Surabattula <rohiths.msft@gmail.com> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cifs@vger.kernel.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org cc: linux-mm@kvack.org
2023-10-06 17:16:15 +00:00
void (*post_modify)(struct inode *inode);
netfs: Dispatch write requests to process a writeback slice Dispatch one or more write reqeusts to process a writeback slice, where a slice is tailored more to logical block divisions within the file (such as crypto blocks, an object layout or cache granules) than the protocol RPC maximum capacity. The dispatch doesn't happen until throttling allows, at which point the entire writeback slice is processed and queued. A slice may be written to multiple destinations (one or more servers and the local cache) and the writes to each destination might be split up along different lines. The writeback slice holds the required folios pinned. An iov_iter is provided in netfs_write_request that describes the buffer to be used. This may be part of the pagecache, may have auxiliary padding pages attached or may be a bounce buffer resulting from crypto or compression. Consequently, the filesystem must not twiddle the folio markings directly. The following API is available to the filesystem: (1) The ->create_write_requests() method is called to ask the filesystem to create the requests it needs. This is passed the writeback slice to be processed. (2) The filesystem should then call netfs_create_write_request() to create the requests it needs. (3) Once a request is initialised, netfs_queue_write_request() can be called to dispatch it asynchronously, if not completed immediately. (4) netfs_write_request_completed() should be called to note the completion of a request. (5) netfs_get_write_request() and netfs_put_write_request() are provided to refcount a request. These take constants from the netfs_wreq_trace enum for logging into ftrace. (6) The ->free_write_request is method is called to ask the filesystem to clean up a request. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org cc: linux-mm@kvack.org
2021-06-29 21:31:48 +00:00
/* Write request handling */
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
void (*begin_writeback)(struct netfs_io_request *wreq);
void (*prepare_write)(struct netfs_io_subrequest *subreq);
void (*issue_write)(struct netfs_io_subrequest *subreq);
void (*retry_request)(struct netfs_io_request *wreq, struct netfs_io_stream *stream);
netfs: Dispatch write requests to process a writeback slice Dispatch one or more write reqeusts to process a writeback slice, where a slice is tailored more to logical block divisions within the file (such as crypto blocks, an object layout or cache granules) than the protocol RPC maximum capacity. The dispatch doesn't happen until throttling allows, at which point the entire writeback slice is processed and queued. A slice may be written to multiple destinations (one or more servers and the local cache) and the writes to each destination might be split up along different lines. The writeback slice holds the required folios pinned. An iov_iter is provided in netfs_write_request that describes the buffer to be used. This may be part of the pagecache, may have auxiliary padding pages attached or may be a bounce buffer resulting from crypto or compression. Consequently, the filesystem must not twiddle the folio markings directly. The following API is available to the filesystem: (1) The ->create_write_requests() method is called to ask the filesystem to create the requests it needs. This is passed the writeback slice to be processed. (2) The filesystem should then call netfs_create_write_request() to create the requests it needs. (3) Once a request is initialised, netfs_queue_write_request() can be called to dispatch it asynchronously, if not completed immediately. (4) netfs_write_request_completed() should be called to note the completion of a request. (5) netfs_get_write_request() and netfs_put_write_request() are provided to refcount a request. These take constants from the netfs_wreq_trace enum for logging into ftrace. (6) The ->free_write_request is method is called to ask the filesystem to clean up a request. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org cc: linux-mm@kvack.org
2021-06-29 21:31:48 +00:00
void (*invalidate_cache)(struct netfs_io_request *wreq);
netfs: Provide readahead and readpage netfs helpers Add a pair of helper functions: (*) netfs_readahead() (*) netfs_readpage() to do the work of handling a readahead or a readpage, where the page(s) that form part of the request may be split between the local cache, the server or just require clearing, and may be single pages and transparent huge pages. This is all handled within the helper. Note that while both will read from the cache if there is data present, only netfs_readahead() will expand the request beyond what it was asked to do, and only netfs_readahead() will write back to the cache. netfs_readpage(), on the other hand, is synchronous and only fetches the page (which might be a THP) it is asked for. The netfs gives the helper parameters from the VM, the cache cookie it wants to use (or NULL) and a table of operations (only one of which is mandatory): (*) expand_readahead() [optional] Called to allow the netfs to request an expansion of a readahead request to meet its own alignment requirements. This is done by changing rreq->start and rreq->len. (*) clamp_length() [optional] Called to allow the netfs to cut down a subrequest to meet its own boundary requirements. If it does this, the helper will generate additional subrequests until the full request is satisfied. (*) is_still_valid() [optional] Called to find out if the data just read from the cache has been invalidated and must be reread from the server. (*) issue_op() [required] Called to ask the netfs to issue a read to the server. The subrequest describes the read. The read request holds information about the file being accessed. The netfs can cache information in rreq->netfs_priv. Upon completion, the netfs should set the error, transferred and can also set FSCACHE_SREQ_CLEAR_TAIL and then call fscache_subreq_terminated(). (*) done() [optional] Called after the pages have been unlocked. The read request is still pinning the file and mapping and may still be pinning pages with PG_fscache. rreq->error indicates any error that has been accumulated. (*) cleanup() [optional] Called when the helper is disposing of a finished read request. This allows the netfs to clear rreq->netfs_priv. Netfs support is enabled with CONFIG_NETFS_SUPPORT=y. It will be built even if CONFIG_FSCACHE=n and in this case much of it should be optimised away, allowing the filesystem to use it even when caching is disabled. Changes: v5: - Comment why netfs_readahead() is putting pages[2]. - Use page_file_mapping() rather than page->mapping[2]. - Use page_index() rather than page->index[2]. - Use set_page_fscache()[3] rather then SetPageFsCache() as this takes an appropriate ref too[4]. v4: - Folded in a kerneldoc comment fix. - Folded in a fix for the error handling in the case that ENOMEM occurs. - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/20210321014202.GF3420@casper.infradead.org/ [2] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/CAHk-=wh+2gbF7XEjYc=HV9w_2uVzVf7vs60BPz0gFA=+pUm3ww@mail.gmail.com/ [4] Link: https://lore.kernel.org/r/160588497406.3465195.18003475695899726222.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118136849.1232039.8923686136144228724.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161032290.2537118.13400578415247339173.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340394873.1303470.6237319335883242536.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539537375.286939.16642940088716990995.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653795430.2770958.4947584573720000554.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789076581.6155.6745849361504760209.stgit@warthog.procyon.org.uk/ # v6
2020-05-13 16:41:20 +00:00
};
/*
* How to handle reading from a hole.
*/
enum netfs_read_from_hole {
NETFS_READ_HOLE_IGNORE,
NETFS_READ_HOLE_FAIL,
};
netfs: Define an interface to talk to a cache Add an interface to the netfs helper library for reading data from the cache instead of downloading it from the server and support for writing data just downloaded or cleared to the cache. The API passes an iov_iter to the cache read/write routines to indicate the data/buffer to be used. This is done using the ITER_XARRAY type to provide direct access to the netfs inode's pagecache. When the netfs's ->begin_cache_operation() method is called, this must fill in the cache_resources in the netfs_read_request struct, including the netfs_cache_ops used by the helper lib to talk to the cache. The helper lib does not directly access the cache. Changes: v6: - Call trace_netfs_read() after beginning the cache op so that the cookie debug ID can be logged[3]. - Don't record the error from writing to the cache. We don't want to pass it back to the netfs[4]. - Fix copy-to-cache subreq amalgamation to not round up as it goes along otherwise it overcalculates the length of the write[5]. v5: - Use end_page_fscache() rather than unlock_page_fscache()[2]. v4: - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). - Add missing inc of netfs_n_rh_read stat. - Move initial definition of fscache_begin_read_operation() elsewhere. - Need to call op->begin_cache_operation() from netfs_write_begin(). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [2] Link: https://lore.kernel.org/r/161781045123.463527.14533348855710902201.stgit@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/161781046256.463527.18158681600085556192.stgit@warthog.procyon.org.uk/ [4] Link: https://lore.kernel.org/r/161781047695.463527.7463536103593997492.stgit@warthog.procyon.org.uk/ [5] Link: https://lore.kernel.org/r/161118141321.1232039.8296910406755622458.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161036700.2537118.11170748455436854978.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340399569.1303470.1138884774643385730.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539542874.286939.13337898213448136687.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653799826.2770958.9015430297426331950.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789081462.6155.3853904866933313256.stgit@warthog.procyon.org.uk/ # v6
2020-02-06 14:22:24 +00:00
/*
* Table of operations for access to a cache.
netfs: Define an interface to talk to a cache Add an interface to the netfs helper library for reading data from the cache instead of downloading it from the server and support for writing data just downloaded or cleared to the cache. The API passes an iov_iter to the cache read/write routines to indicate the data/buffer to be used. This is done using the ITER_XARRAY type to provide direct access to the netfs inode's pagecache. When the netfs's ->begin_cache_operation() method is called, this must fill in the cache_resources in the netfs_read_request struct, including the netfs_cache_ops used by the helper lib to talk to the cache. The helper lib does not directly access the cache. Changes: v6: - Call trace_netfs_read() after beginning the cache op so that the cookie debug ID can be logged[3]. - Don't record the error from writing to the cache. We don't want to pass it back to the netfs[4]. - Fix copy-to-cache subreq amalgamation to not round up as it goes along otherwise it overcalculates the length of the write[5]. v5: - Use end_page_fscache() rather than unlock_page_fscache()[2]. v4: - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). - Add missing inc of netfs_n_rh_read stat. - Move initial definition of fscache_begin_read_operation() elsewhere. - Need to call op->begin_cache_operation() from netfs_write_begin(). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [2] Link: https://lore.kernel.org/r/161781045123.463527.14533348855710902201.stgit@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/161781046256.463527.18158681600085556192.stgit@warthog.procyon.org.uk/ [4] Link: https://lore.kernel.org/r/161781047695.463527.7463536103593997492.stgit@warthog.procyon.org.uk/ [5] Link: https://lore.kernel.org/r/161118141321.1232039.8296910406755622458.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161036700.2537118.11170748455436854978.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340399569.1303470.1138884774643385730.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539542874.286939.13337898213448136687.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653799826.2770958.9015430297426331950.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789081462.6155.3853904866933313256.stgit@warthog.procyon.org.uk/ # v6
2020-02-06 14:22:24 +00:00
*/
struct netfs_cache_ops {
/* End an operation */
void (*end_operation)(struct netfs_cache_resources *cres);
/* Read data from the cache */
int (*read)(struct netfs_cache_resources *cres,
loff_t start_pos,
struct iov_iter *iter,
enum netfs_read_from_hole read_hole,
netfs: Define an interface to talk to a cache Add an interface to the netfs helper library for reading data from the cache instead of downloading it from the server and support for writing data just downloaded or cleared to the cache. The API passes an iov_iter to the cache read/write routines to indicate the data/buffer to be used. This is done using the ITER_XARRAY type to provide direct access to the netfs inode's pagecache. When the netfs's ->begin_cache_operation() method is called, this must fill in the cache_resources in the netfs_read_request struct, including the netfs_cache_ops used by the helper lib to talk to the cache. The helper lib does not directly access the cache. Changes: v6: - Call trace_netfs_read() after beginning the cache op so that the cookie debug ID can be logged[3]. - Don't record the error from writing to the cache. We don't want to pass it back to the netfs[4]. - Fix copy-to-cache subreq amalgamation to not round up as it goes along otherwise it overcalculates the length of the write[5]. v5: - Use end_page_fscache() rather than unlock_page_fscache()[2]. v4: - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). - Add missing inc of netfs_n_rh_read stat. - Move initial definition of fscache_begin_read_operation() elsewhere. - Need to call op->begin_cache_operation() from netfs_write_begin(). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [2] Link: https://lore.kernel.org/r/161781045123.463527.14533348855710902201.stgit@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/161781046256.463527.18158681600085556192.stgit@warthog.procyon.org.uk/ [4] Link: https://lore.kernel.org/r/161781047695.463527.7463536103593997492.stgit@warthog.procyon.org.uk/ [5] Link: https://lore.kernel.org/r/161118141321.1232039.8296910406755622458.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161036700.2537118.11170748455436854978.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340399569.1303470.1138884774643385730.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539542874.286939.13337898213448136687.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653799826.2770958.9015430297426331950.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789081462.6155.3853904866933313256.stgit@warthog.procyon.org.uk/ # v6
2020-02-06 14:22:24 +00:00
netfs_io_terminated_t term_func,
void *term_func_priv);
/* Write data to the cache */
int (*write)(struct netfs_cache_resources *cres,
loff_t start_pos,
struct iov_iter *iter,
netfs_io_terminated_t term_func,
void *term_func_priv);
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
/* Write data to the cache from a netfs subrequest. */
void (*issue_write)(struct netfs_io_subrequest *subreq);
netfs: Define an interface to talk to a cache Add an interface to the netfs helper library for reading data from the cache instead of downloading it from the server and support for writing data just downloaded or cleared to the cache. The API passes an iov_iter to the cache read/write routines to indicate the data/buffer to be used. This is done using the ITER_XARRAY type to provide direct access to the netfs inode's pagecache. When the netfs's ->begin_cache_operation() method is called, this must fill in the cache_resources in the netfs_read_request struct, including the netfs_cache_ops used by the helper lib to talk to the cache. The helper lib does not directly access the cache. Changes: v6: - Call trace_netfs_read() after beginning the cache op so that the cookie debug ID can be logged[3]. - Don't record the error from writing to the cache. We don't want to pass it back to the netfs[4]. - Fix copy-to-cache subreq amalgamation to not round up as it goes along otherwise it overcalculates the length of the write[5]. v5: - Use end_page_fscache() rather than unlock_page_fscache()[2]. v4: - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). - Add missing inc of netfs_n_rh_read stat. - Move initial definition of fscache_begin_read_operation() elsewhere. - Need to call op->begin_cache_operation() from netfs_write_begin(). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [2] Link: https://lore.kernel.org/r/161781045123.463527.14533348855710902201.stgit@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/161781046256.463527.18158681600085556192.stgit@warthog.procyon.org.uk/ [4] Link: https://lore.kernel.org/r/161781047695.463527.7463536103593997492.stgit@warthog.procyon.org.uk/ [5] Link: https://lore.kernel.org/r/161118141321.1232039.8296910406755622458.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161036700.2537118.11170748455436854978.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340399569.1303470.1138884774643385730.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539542874.286939.13337898213448136687.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653799826.2770958.9015430297426331950.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789081462.6155.3853904866933313256.stgit@warthog.procyon.org.uk/ # v6
2020-02-06 14:22:24 +00:00
/* Expand readahead request */
void (*expand_readahead)(struct netfs_cache_resources *cres,
unsigned long long *_start,
unsigned long long *_len,
unsigned long long i_size);
netfs: Define an interface to talk to a cache Add an interface to the netfs helper library for reading data from the cache instead of downloading it from the server and support for writing data just downloaded or cleared to the cache. The API passes an iov_iter to the cache read/write routines to indicate the data/buffer to be used. This is done using the ITER_XARRAY type to provide direct access to the netfs inode's pagecache. When the netfs's ->begin_cache_operation() method is called, this must fill in the cache_resources in the netfs_read_request struct, including the netfs_cache_ops used by the helper lib to talk to the cache. The helper lib does not directly access the cache. Changes: v6: - Call trace_netfs_read() after beginning the cache op so that the cookie debug ID can be logged[3]. - Don't record the error from writing to the cache. We don't want to pass it back to the netfs[4]. - Fix copy-to-cache subreq amalgamation to not round up as it goes along otherwise it overcalculates the length of the write[5]. v5: - Use end_page_fscache() rather than unlock_page_fscache()[2]. v4: - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). - Add missing inc of netfs_n_rh_read stat. - Move initial definition of fscache_begin_read_operation() elsewhere. - Need to call op->begin_cache_operation() from netfs_write_begin(). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [2] Link: https://lore.kernel.org/r/161781045123.463527.14533348855710902201.stgit@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/161781046256.463527.18158681600085556192.stgit@warthog.procyon.org.uk/ [4] Link: https://lore.kernel.org/r/161781047695.463527.7463536103593997492.stgit@warthog.procyon.org.uk/ [5] Link: https://lore.kernel.org/r/161118141321.1232039.8296910406755622458.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161036700.2537118.11170748455436854978.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340399569.1303470.1138884774643385730.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539542874.286939.13337898213448136687.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653799826.2770958.9015430297426331950.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789081462.6155.3853904866933313256.stgit@warthog.procyon.org.uk/ # v6
2020-02-06 14:22:24 +00:00
/* Prepare a read operation, shortening it to a cached/uncached
* boundary as appropriate.
*/
enum netfs_io_source (*prepare_read)(struct netfs_io_subrequest *subreq,
unsigned long long i_size);
netfs: Define an interface to talk to a cache Add an interface to the netfs helper library for reading data from the cache instead of downloading it from the server and support for writing data just downloaded or cleared to the cache. The API passes an iov_iter to the cache read/write routines to indicate the data/buffer to be used. This is done using the ITER_XARRAY type to provide direct access to the netfs inode's pagecache. When the netfs's ->begin_cache_operation() method is called, this must fill in the cache_resources in the netfs_read_request struct, including the netfs_cache_ops used by the helper lib to talk to the cache. The helper lib does not directly access the cache. Changes: v6: - Call trace_netfs_read() after beginning the cache op so that the cookie debug ID can be logged[3]. - Don't record the error from writing to the cache. We don't want to pass it back to the netfs[4]. - Fix copy-to-cache subreq amalgamation to not round up as it goes along otherwise it overcalculates the length of the write[5]. v5: - Use end_page_fscache() rather than unlock_page_fscache()[2]. v4: - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). - Add missing inc of netfs_n_rh_read stat. - Move initial definition of fscache_begin_read_operation() elsewhere. - Need to call op->begin_cache_operation() from netfs_write_begin(). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [2] Link: https://lore.kernel.org/r/161781045123.463527.14533348855710902201.stgit@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/161781046256.463527.18158681600085556192.stgit@warthog.procyon.org.uk/ [4] Link: https://lore.kernel.org/r/161781047695.463527.7463536103593997492.stgit@warthog.procyon.org.uk/ [5] Link: https://lore.kernel.org/r/161118141321.1232039.8296910406755622458.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161036700.2537118.11170748455436854978.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340399569.1303470.1138884774643385730.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539542874.286939.13337898213448136687.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653799826.2770958.9015430297426331950.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789081462.6155.3853904866933313256.stgit@warthog.procyon.org.uk/ # v6
2020-02-06 14:22:24 +00:00
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
/* Prepare a write subrequest, working out if we're allowed to do it
* and finding out the maximum amount of data to gather before
* attempting to submit. If we're not permitted to do it, the
* subrequest should be marked failed.
*/
void (*prepare_write_subreq)(struct netfs_io_subrequest *subreq);
netfs: Define an interface to talk to a cache Add an interface to the netfs helper library for reading data from the cache instead of downloading it from the server and support for writing data just downloaded or cleared to the cache. The API passes an iov_iter to the cache read/write routines to indicate the data/buffer to be used. This is done using the ITER_XARRAY type to provide direct access to the netfs inode's pagecache. When the netfs's ->begin_cache_operation() method is called, this must fill in the cache_resources in the netfs_read_request struct, including the netfs_cache_ops used by the helper lib to talk to the cache. The helper lib does not directly access the cache. Changes: v6: - Call trace_netfs_read() after beginning the cache op so that the cookie debug ID can be logged[3]. - Don't record the error from writing to the cache. We don't want to pass it back to the netfs[4]. - Fix copy-to-cache subreq amalgamation to not round up as it goes along otherwise it overcalculates the length of the write[5]. v5: - Use end_page_fscache() rather than unlock_page_fscache()[2]. v4: - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). - Add missing inc of netfs_n_rh_read stat. - Move initial definition of fscache_begin_read_operation() elsewhere. - Need to call op->begin_cache_operation() from netfs_write_begin(). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [2] Link: https://lore.kernel.org/r/161781045123.463527.14533348855710902201.stgit@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/161781046256.463527.18158681600085556192.stgit@warthog.procyon.org.uk/ [4] Link: https://lore.kernel.org/r/161781047695.463527.7463536103593997492.stgit@warthog.procyon.org.uk/ [5] Link: https://lore.kernel.org/r/161118141321.1232039.8296910406755622458.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161036700.2537118.11170748455436854978.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340399569.1303470.1138884774643385730.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539542874.286939.13337898213448136687.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653799826.2770958.9015430297426331950.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789081462.6155.3853904866933313256.stgit@warthog.procyon.org.uk/ # v6
2020-02-06 14:22:24 +00:00
/* Prepare a write operation, working out what part of the write we can
* actually do.
*/
int (*prepare_write)(struct netfs_cache_resources *cres,
loff_t *_start, size_t *_len, size_t upper_len,
loff_t i_size, bool no_space_allocated_yet);
/* Prepare an on-demand read operation, shortening it to a cached/uncached
* boundary as appropriate.
*/
enum netfs_io_source (*prepare_ondemand_read)(struct netfs_cache_resources *cres,
loff_t start, size_t *_len,
loff_t i_size,
unsigned long *_flags, ino_t ino);
/* Query the occupancy of the cache in a region, returning where the
* next chunk of data starts and how long it is.
*/
int (*query_occupancy)(struct netfs_cache_resources *cres,
loff_t start, size_t len, size_t granularity,
loff_t *_data_start, size_t *_data_len);
netfs: Define an interface to talk to a cache Add an interface to the netfs helper library for reading data from the cache instead of downloading it from the server and support for writing data just downloaded or cleared to the cache. The API passes an iov_iter to the cache read/write routines to indicate the data/buffer to be used. This is done using the ITER_XARRAY type to provide direct access to the netfs inode's pagecache. When the netfs's ->begin_cache_operation() method is called, this must fill in the cache_resources in the netfs_read_request struct, including the netfs_cache_ops used by the helper lib to talk to the cache. The helper lib does not directly access the cache. Changes: v6: - Call trace_netfs_read() after beginning the cache op so that the cookie debug ID can be logged[3]. - Don't record the error from writing to the cache. We don't want to pass it back to the netfs[4]. - Fix copy-to-cache subreq amalgamation to not round up as it goes along otherwise it overcalculates the length of the write[5]. v5: - Use end_page_fscache() rather than unlock_page_fscache()[2]. v4: - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). - Add missing inc of netfs_n_rh_read stat. - Move initial definition of fscache_begin_read_operation() elsewhere. - Need to call op->begin_cache_operation() from netfs_write_begin(). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [2] Link: https://lore.kernel.org/r/161781045123.463527.14533348855710902201.stgit@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/161781046256.463527.18158681600085556192.stgit@warthog.procyon.org.uk/ [4] Link: https://lore.kernel.org/r/161781047695.463527.7463536103593997492.stgit@warthog.procyon.org.uk/ [5] Link: https://lore.kernel.org/r/161118141321.1232039.8296910406755622458.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161036700.2537118.11170748455436854978.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340399569.1303470.1138884774643385730.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539542874.286939.13337898213448136687.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653799826.2770958.9015430297426331950.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789081462.6155.3853904866933313256.stgit@warthog.procyon.org.uk/ # v6
2020-02-06 14:22:24 +00:00
};
/* High-level read API. */
ssize_t netfs_unbuffered_read_iter_locked(struct kiocb *iocb, struct iov_iter *iter);
ssize_t netfs_unbuffered_read_iter(struct kiocb *iocb, struct iov_iter *iter);
ssize_t netfs_buffered_read_iter(struct kiocb *iocb, struct iov_iter *iter);
ssize_t netfs_file_read_iter(struct kiocb *iocb, struct iov_iter *iter);
/* High-level write API */
ssize_t netfs_perform_write(struct kiocb *iocb, struct iov_iter *iter,
struct netfs_group *netfs_group);
ssize_t netfs_buffered_write_iter_locked(struct kiocb *iocb, struct iov_iter *from,
struct netfs_group *netfs_group);
ssize_t netfs_unbuffered_write_iter(struct kiocb *iocb, struct iov_iter *from);
ssize_t netfs_unbuffered_write_iter_locked(struct kiocb *iocb, struct iov_iter *iter,
struct netfs_group *netfs_group);
ssize_t netfs_file_write_iter(struct kiocb *iocb, struct iov_iter *from);
/* Single, monolithic object read/write API. */
void netfs_single_mark_inode_dirty(struct inode *inode);
ssize_t netfs_read_single(struct inode *inode, struct file *file, struct iov_iter *iter);
int netfs_writeback_single(struct address_space *mapping,
struct writeback_control *wbc,
struct iov_iter *iter);
/* Address operations API */
netfs: Provide readahead and readpage netfs helpers Add a pair of helper functions: (*) netfs_readahead() (*) netfs_readpage() to do the work of handling a readahead or a readpage, where the page(s) that form part of the request may be split between the local cache, the server or just require clearing, and may be single pages and transparent huge pages. This is all handled within the helper. Note that while both will read from the cache if there is data present, only netfs_readahead() will expand the request beyond what it was asked to do, and only netfs_readahead() will write back to the cache. netfs_readpage(), on the other hand, is synchronous and only fetches the page (which might be a THP) it is asked for. The netfs gives the helper parameters from the VM, the cache cookie it wants to use (or NULL) and a table of operations (only one of which is mandatory): (*) expand_readahead() [optional] Called to allow the netfs to request an expansion of a readahead request to meet its own alignment requirements. This is done by changing rreq->start and rreq->len. (*) clamp_length() [optional] Called to allow the netfs to cut down a subrequest to meet its own boundary requirements. If it does this, the helper will generate additional subrequests until the full request is satisfied. (*) is_still_valid() [optional] Called to find out if the data just read from the cache has been invalidated and must be reread from the server. (*) issue_op() [required] Called to ask the netfs to issue a read to the server. The subrequest describes the read. The read request holds information about the file being accessed. The netfs can cache information in rreq->netfs_priv. Upon completion, the netfs should set the error, transferred and can also set FSCACHE_SREQ_CLEAR_TAIL and then call fscache_subreq_terminated(). (*) done() [optional] Called after the pages have been unlocked. The read request is still pinning the file and mapping and may still be pinning pages with PG_fscache. rreq->error indicates any error that has been accumulated. (*) cleanup() [optional] Called when the helper is disposing of a finished read request. This allows the netfs to clear rreq->netfs_priv. Netfs support is enabled with CONFIG_NETFS_SUPPORT=y. It will be built even if CONFIG_FSCACHE=n and in this case much of it should be optimised away, allowing the filesystem to use it even when caching is disabled. Changes: v5: - Comment why netfs_readahead() is putting pages[2]. - Use page_file_mapping() rather than page->mapping[2]. - Use page_index() rather than page->index[2]. - Use set_page_fscache()[3] rather then SetPageFsCache() as this takes an appropriate ref too[4]. v4: - Folded in a kerneldoc comment fix. - Folded in a fix for the error handling in the case that ENOMEM occurs. - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/20210321014202.GF3420@casper.infradead.org/ [2] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/CAHk-=wh+2gbF7XEjYc=HV9w_2uVzVf7vs60BPz0gFA=+pUm3ww@mail.gmail.com/ [4] Link: https://lore.kernel.org/r/160588497406.3465195.18003475695899726222.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118136849.1232039.8923686136144228724.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161032290.2537118.13400578415247339173.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340394873.1303470.6237319335883242536.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539537375.286939.16642940088716990995.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653795430.2770958.4947584573720000554.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789076581.6155.6745849361504760209.stgit@warthog.procyon.org.uk/ # v6
2020-05-13 16:41:20 +00:00
struct readahead_control;
void netfs_readahead(struct readahead_control *);
int netfs_read_folio(struct file *, struct folio *);
int netfs_write_begin(struct netfs_inode *, struct file *,
struct address_space *, loff_t pos, unsigned int len,
struct folio **, void **fsdata);
int netfs_writepages(struct address_space *mapping,
struct writeback_control *wbc);
bool netfs_dirty_folio(struct address_space *mapping, struct folio *folio);
int netfs_unpin_writeback(struct inode *inode, struct writeback_control *wbc);
void netfs_clear_inode_writeback(struct inode *inode, const void *aux);
void netfs_invalidate_folio(struct folio *folio, size_t offset, size_t length);
bool netfs_release_folio(struct folio *folio, gfp_t gfp);
/* VMA operations API. */
vm_fault_t netfs_page_mkwrite(struct vm_fault *vmf, struct netfs_group *netfs_group);
/* (Sub)request management API. */
void netfs_read_subreq_progress(struct netfs_io_subrequest *subreq);
void netfs_read_subreq_terminated(struct netfs_io_subrequest *subreq);
void netfs_get_subrequest(struct netfs_io_subrequest *subreq,
enum netfs_sreq_ref_trace what);
void netfs_put_subrequest(struct netfs_io_subrequest *subreq,
netfs: Fix the request's work item to not require a ref When the netfs_io_request struct's work item is queued, it must be supplied with a ref to the work item struct to prevent it being deallocated whilst on the queue or whilst it is being processed. This is tricky to manage as we have to get a ref before we try and queue it and then we may find it's already queued and is thus already holding a ref - in which case we have to try and get rid of the ref again. The problem comes if we're in BH or IRQ context and need to drop the ref: if netfs_put_request() reduces the count to 0, we have to do the cleanup - but the cleanup may need to wait. Fix this by adding a new work item to the request, ->cleanup_work, and dispatching that when the refcount hits zero. That can then synchronously cancel any outstanding work on the main work item before doing the cleanup. Adding a new work item also deals with another problem upstream where it's sometimes changing the work func in the put function and requeuing it - which has occasionally in the past caused the cleanup to happen incorrectly. As a bonus, this allows us to get rid of the 'was_async' parameter from a bunch of functions. This indicated whether the put function might not be permitted to sleep. Fixes: 3d3c95046742 ("netfs: Provide readahead and readpage netfs helpers") Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/20250519090707.2848510-4-dhowells@redhat.com cc: Paulo Alcantara <pc@manguebit.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Steve French <stfrench@microsoft.com> cc: linux-cifs@vger.kernel.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-05-19 09:07:03 +00:00
enum netfs_sreq_ref_trace what);
ssize_t netfs_extract_user_iter(struct iov_iter *orig, size_t orig_len,
struct iov_iter *new,
iov_iter_extraction_t extraction_flags);
size_t netfs_limit_iter(const struct iov_iter *iter, size_t start_offset,
size_t max_size, size_t max_segs);
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
void netfs_prepare_write_failed(struct netfs_io_subrequest *subreq);
netfs: Fix the request's work item to not require a ref When the netfs_io_request struct's work item is queued, it must be supplied with a ref to the work item struct to prevent it being deallocated whilst on the queue or whilst it is being processed. This is tricky to manage as we have to get a ref before we try and queue it and then we may find it's already queued and is thus already holding a ref - in which case we have to try and get rid of the ref again. The problem comes if we're in BH or IRQ context and need to drop the ref: if netfs_put_request() reduces the count to 0, we have to do the cleanup - but the cleanup may need to wait. Fix this by adding a new work item to the request, ->cleanup_work, and dispatching that when the refcount hits zero. That can then synchronously cancel any outstanding work on the main work item before doing the cleanup. Adding a new work item also deals with another problem upstream where it's sometimes changing the work func in the put function and requeuing it - which has occasionally in the past caused the cleanup to happen incorrectly. As a bonus, this allows us to get rid of the 'was_async' parameter from a bunch of functions. This indicated whether the put function might not be permitted to sleep. Fixes: 3d3c95046742 ("netfs: Provide readahead and readpage netfs helpers") Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/20250519090707.2848510-4-dhowells@redhat.com cc: Paulo Alcantara <pc@manguebit.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Steve French <stfrench@microsoft.com> cc: linux-cifs@vger.kernel.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Signed-off-by: Christian Brauner <brauner@kernel.org>
2025-05-19 09:07:03 +00:00
void netfs_write_subrequest_terminated(void *_op, ssize_t transferred_or_error);
netfs: Provide readahead and readpage netfs helpers Add a pair of helper functions: (*) netfs_readahead() (*) netfs_readpage() to do the work of handling a readahead or a readpage, where the page(s) that form part of the request may be split between the local cache, the server or just require clearing, and may be single pages and transparent huge pages. This is all handled within the helper. Note that while both will read from the cache if there is data present, only netfs_readahead() will expand the request beyond what it was asked to do, and only netfs_readahead() will write back to the cache. netfs_readpage(), on the other hand, is synchronous and only fetches the page (which might be a THP) it is asked for. The netfs gives the helper parameters from the VM, the cache cookie it wants to use (or NULL) and a table of operations (only one of which is mandatory): (*) expand_readahead() [optional] Called to allow the netfs to request an expansion of a readahead request to meet its own alignment requirements. This is done by changing rreq->start and rreq->len. (*) clamp_length() [optional] Called to allow the netfs to cut down a subrequest to meet its own boundary requirements. If it does this, the helper will generate additional subrequests until the full request is satisfied. (*) is_still_valid() [optional] Called to find out if the data just read from the cache has been invalidated and must be reread from the server. (*) issue_op() [required] Called to ask the netfs to issue a read to the server. The subrequest describes the read. The read request holds information about the file being accessed. The netfs can cache information in rreq->netfs_priv. Upon completion, the netfs should set the error, transferred and can also set FSCACHE_SREQ_CLEAR_TAIL and then call fscache_subreq_terminated(). (*) done() [optional] Called after the pages have been unlocked. The read request is still pinning the file and mapping and may still be pinning pages with PG_fscache. rreq->error indicates any error that has been accumulated. (*) cleanup() [optional] Called when the helper is disposing of a finished read request. This allows the netfs to clear rreq->netfs_priv. Netfs support is enabled with CONFIG_NETFS_SUPPORT=y. It will be built even if CONFIG_FSCACHE=n and in this case much of it should be optimised away, allowing the filesystem to use it even when caching is disabled. Changes: v5: - Comment why netfs_readahead() is putting pages[2]. - Use page_file_mapping() rather than page->mapping[2]. - Use page_index() rather than page->index[2]. - Use set_page_fscache()[3] rather then SetPageFsCache() as this takes an appropriate ref too[4]. v4: - Folded in a kerneldoc comment fix. - Folded in a fix for the error handling in the case that ENOMEM occurs. - Added flag to netfs_subreq_terminated() to indicate that the caller may have been running async and stuff that might sleep needs punting to a workqueue (can't use in_softirq()[1]). Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-and-tested-by: Jeff Layton <jlayton@kernel.org> Tested-by: Dave Wysochanski <dwysocha@redhat.com> Tested-By: Marc Dionne <marc.dionne@auristor.com> cc: Matthew Wilcox <willy@infradead.org> cc: linux-mm@kvack.org cc: linux-cachefs@redhat.com cc: linux-afs@lists.infradead.org cc: linux-nfs@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: ceph-devel@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-fsdevel@vger.kernel.org Link: https://lore.kernel.org/r/20210216084230.GA23669@lst.de/ [1] Link: https://lore.kernel.org/r/20210321014202.GF3420@casper.infradead.org/ [2] Link: https://lore.kernel.org/r/2499407.1616505440@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/CAHk-=wh+2gbF7XEjYc=HV9w_2uVzVf7vs60BPz0gFA=+pUm3ww@mail.gmail.com/ [4] Link: https://lore.kernel.org/r/160588497406.3465195.18003475695899726222.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161118136849.1232039.8923686136144228724.stgit@warthog.procyon.org.uk/ # rfc Link: https://lore.kernel.org/r/161161032290.2537118.13400578415247339173.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161340394873.1303470.6237319335883242536.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/161539537375.286939.16642940088716990995.stgit@warthog.procyon.org.uk/ # v4 Link: https://lore.kernel.org/r/161653795430.2770958.4947584573720000554.stgit@warthog.procyon.org.uk/ # v5 Link: https://lore.kernel.org/r/161789076581.6155.6745849361504760209.stgit@warthog.procyon.org.uk/ # v6
2020-05-13 16:41:20 +00:00
int netfs_start_io_read(struct inode *inode);
void netfs_end_io_read(struct inode *inode);
int netfs_start_io_write(struct inode *inode);
void netfs_end_io_write(struct inode *inode);
int netfs_start_io_direct(struct inode *inode);
void netfs_end_io_direct(struct inode *inode);
/* Miscellaneous APIs. */
struct folio_queue *netfs_folioq_alloc(unsigned int rreq_id, gfp_t gfp,
unsigned int trace /*enum netfs_folioq_trace*/);
void netfs_folioq_free(struct folio_queue *folioq,
unsigned int trace /*enum netfs_trace_folioq*/);
/* Buffer wrangling helpers API. */
int netfs_alloc_folioq_buffer(struct address_space *mapping,
struct folio_queue **_buffer,
size_t *_cur_size, ssize_t size, gfp_t gfp);
void netfs_free_folioq_buffer(struct folio_queue *fq);
netfs: Add a netfs inode context Add a netfs_i_context struct that should be included in the network filesystem's own inode struct wrapper, directly after the VFS's inode struct, e.g.: struct my_inode { struct { /* These must be contiguous */ struct inode vfs_inode; struct netfs_i_context netfs_ctx; }; }; The netfs_i_context struct so far contains a single field for the network filesystem to use - the cache cookie: struct netfs_i_context { ... struct fscache_cookie *cache; }; Three functions are provided to help with this: (1) void netfs_i_context_init(struct inode *inode, const struct netfs_request_ops *ops); Initialise the netfs context and set the operations. (2) struct netfs_i_context *netfs_i_context(struct inode *inode); Find the netfs context from the VFS inode. (3) struct inode *netfs_inode(struct netfs_i_context *ctx); Find the VFS inode from the netfs context. Changes ======= ver #4) - Fix netfs_is_cache_enabled() to check cookie->cache_priv to see if a cache is present[3]. - Fix netfs_skip_folio_read() to zero out all of the page, not just some of it[3]. ver #3) - Split out the bit to move ceph cap-getting on readahead into ceph_init_request()[1]. - Stick in a comment to the netfs inode structs indicating the contiguity requirements[2]. ver #2) - Adjust documentation to match. - Use "#if IS_ENABLED()" in netfs_i_cookie(), not "#ifdef". - Move the cap check from ceph_readahead() to ceph_init_request() to be called from netfslib. - Remove ceph_readahead() and use netfs_readahead() directly instead. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com Link: https://lore.kernel.org/r/8af0d47f17d89c06bbf602496dd845f2b0bf25b3.camel@kernel.org/ [1] Link: https://lore.kernel.org/r/beaf4f6a6c2575ed489adb14b257253c868f9a5c.camel@kernel.org/ [2] Link: https://lore.kernel.org/r/3536452.1647421585@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/164622984545.3564931.15691742939278418580.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/164678213320.1200972.16807551936267647470.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/164692909854.2099075.9535537286264248057.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/306388.1647595110@warthog.procyon.org.uk/ # v4
2021-06-29 21:37:05 +00:00
/**
netfs: Fix gcc-12 warning by embedding vfs inode in netfs_i_context While randstruct was satisfied with using an open-coded "void *" offset cast for the netfs_i_context <-> inode casting, __builtin_object_size() as used by FORTIFY_SOURCE was not as easily fooled. This was causing the following complaint[1] from gcc v12: In file included from include/linux/string.h:253, from include/linux/ceph/ceph_debug.h:7, from fs/ceph/inode.c:2: In function 'fortify_memset_chk', inlined from 'netfs_i_context_init' at include/linux/netfs.h:326:2, inlined from 'ceph_alloc_inode' at fs/ceph/inode.c:463:2: include/linux/fortify-string.h:242:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning] 242 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix this by embedding a struct inode into struct netfs_i_context (which should perhaps be renamed to struct netfs_inode). The struct inode vfs_inode fields are then removed from the 9p, afs, ceph and cifs inode structs and vfs_inode is then simply changed to "netfs.inode" in those filesystems. Further, rename netfs_i_context to netfs_inode, get rid of the netfs_inode() function that converted a netfs_i_context pointer to an inode pointer (that can now be done with &ctx->inode) and rename the netfs_i_context() function to netfs_inode() (which is now a wrapper around container_of()). Most of the changes were done with: perl -p -i -e 's/vfs_inode/netfs.inode/'g \ `git grep -l 'vfs_inode' -- fs/{9p,afs,ceph,cifs}/*.[ch]` Kees suggested doing it with a pair structure[2] and a special declarator to insert that into the network filesystem's inode wrapper[3], but I think it's cleaner to embed it - and then it doesn't matter if struct randomisation reorders things. Dave Chinner suggested using a filesystem-specific VFS_I() function in each filesystem to convert that filesystem's own inode wrapper struct into the VFS inode struct[4]. Version #2: - Fix a couple of missed name changes due to a disabled cifs option. - Rename nfs_i_context to nfs_inode - Use "netfs" instead of "nic" as the member name in per-fs inode wrapper structs. [ This also undoes commit 507160f46c55 ("netfs: gcc-12: temporarily disable '-Wattribute-warning' for now") that is no longer needed ] Fixes: bc899ee1c898 ("netfs: Add a netfs inode context") Reported-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> cc: Jonathan Corbet <corbet@lwn.net> cc: Eric Van Hensbergen <ericvh@gmail.com> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Ilya Dryomov <idryomov@gmail.com> cc: Steve French <smfrench@gmail.com> cc: William Kucharski <william.kucharski@oracle.com> cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> cc: Dave Chinner <david@fromorbit.com> cc: linux-doc@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-afs@lists.infradead.org cc: ceph-devel@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: samba-technical@lists.samba.org cc: linux-fsdevel@vger.kernel.org cc: linux-hardening@vger.kernel.org Link: https://lore.kernel.org/r/d2ad3a3d7bdd794c6efb562d2f2b655fb67756b9.camel@kernel.org/ [1] Link: https://lore.kernel.org/r/20220517210230.864239-1-keescook@chromium.org/ [2] Link: https://lore.kernel.org/r/20220518202212.2322058-1-keescook@chromium.org/ [3] Link: https://lore.kernel.org/r/20220524101205.GI2306852@dread.disaster.area/ [4] Link: https://lore.kernel.org/r/165296786831.3591209.12111293034669289733.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/165305805651.4094995.7763502506786714216.stgit@warthog.procyon.org.uk # v2 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-06-09 20:46:04 +00:00
* netfs_inode - Get the netfs inode context from the inode
netfs: Add a netfs inode context Add a netfs_i_context struct that should be included in the network filesystem's own inode struct wrapper, directly after the VFS's inode struct, e.g.: struct my_inode { struct { /* These must be contiguous */ struct inode vfs_inode; struct netfs_i_context netfs_ctx; }; }; The netfs_i_context struct so far contains a single field for the network filesystem to use - the cache cookie: struct netfs_i_context { ... struct fscache_cookie *cache; }; Three functions are provided to help with this: (1) void netfs_i_context_init(struct inode *inode, const struct netfs_request_ops *ops); Initialise the netfs context and set the operations. (2) struct netfs_i_context *netfs_i_context(struct inode *inode); Find the netfs context from the VFS inode. (3) struct inode *netfs_inode(struct netfs_i_context *ctx); Find the VFS inode from the netfs context. Changes ======= ver #4) - Fix netfs_is_cache_enabled() to check cookie->cache_priv to see if a cache is present[3]. - Fix netfs_skip_folio_read() to zero out all of the page, not just some of it[3]. ver #3) - Split out the bit to move ceph cap-getting on readahead into ceph_init_request()[1]. - Stick in a comment to the netfs inode structs indicating the contiguity requirements[2]. ver #2) - Adjust documentation to match. - Use "#if IS_ENABLED()" in netfs_i_cookie(), not "#ifdef". - Move the cap check from ceph_readahead() to ceph_init_request() to be called from netfslib. - Remove ceph_readahead() and use netfs_readahead() directly instead. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com Link: https://lore.kernel.org/r/8af0d47f17d89c06bbf602496dd845f2b0bf25b3.camel@kernel.org/ [1] Link: https://lore.kernel.org/r/beaf4f6a6c2575ed489adb14b257253c868f9a5c.camel@kernel.org/ [2] Link: https://lore.kernel.org/r/3536452.1647421585@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/164622984545.3564931.15691742939278418580.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/164678213320.1200972.16807551936267647470.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/164692909854.2099075.9535537286264248057.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/306388.1647595110@warthog.procyon.org.uk/ # v4
2021-06-29 21:37:05 +00:00
* @inode: The inode to query
*
* Get the netfs lib inode context from the network filesystem's inode. The
* context struct is expected to directly follow on from the VFS inode struct.
*/
netfs: Fix gcc-12 warning by embedding vfs inode in netfs_i_context While randstruct was satisfied with using an open-coded "void *" offset cast for the netfs_i_context <-> inode casting, __builtin_object_size() as used by FORTIFY_SOURCE was not as easily fooled. This was causing the following complaint[1] from gcc v12: In file included from include/linux/string.h:253, from include/linux/ceph/ceph_debug.h:7, from fs/ceph/inode.c:2: In function 'fortify_memset_chk', inlined from 'netfs_i_context_init' at include/linux/netfs.h:326:2, inlined from 'ceph_alloc_inode' at fs/ceph/inode.c:463:2: include/linux/fortify-string.h:242:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning] 242 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix this by embedding a struct inode into struct netfs_i_context (which should perhaps be renamed to struct netfs_inode). The struct inode vfs_inode fields are then removed from the 9p, afs, ceph and cifs inode structs and vfs_inode is then simply changed to "netfs.inode" in those filesystems. Further, rename netfs_i_context to netfs_inode, get rid of the netfs_inode() function that converted a netfs_i_context pointer to an inode pointer (that can now be done with &ctx->inode) and rename the netfs_i_context() function to netfs_inode() (which is now a wrapper around container_of()). Most of the changes were done with: perl -p -i -e 's/vfs_inode/netfs.inode/'g \ `git grep -l 'vfs_inode' -- fs/{9p,afs,ceph,cifs}/*.[ch]` Kees suggested doing it with a pair structure[2] and a special declarator to insert that into the network filesystem's inode wrapper[3], but I think it's cleaner to embed it - and then it doesn't matter if struct randomisation reorders things. Dave Chinner suggested using a filesystem-specific VFS_I() function in each filesystem to convert that filesystem's own inode wrapper struct into the VFS inode struct[4]. Version #2: - Fix a couple of missed name changes due to a disabled cifs option. - Rename nfs_i_context to nfs_inode - Use "netfs" instead of "nic" as the member name in per-fs inode wrapper structs. [ This also undoes commit 507160f46c55 ("netfs: gcc-12: temporarily disable '-Wattribute-warning' for now") that is no longer needed ] Fixes: bc899ee1c898 ("netfs: Add a netfs inode context") Reported-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> cc: Jonathan Corbet <corbet@lwn.net> cc: Eric Van Hensbergen <ericvh@gmail.com> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Ilya Dryomov <idryomov@gmail.com> cc: Steve French <smfrench@gmail.com> cc: William Kucharski <william.kucharski@oracle.com> cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> cc: Dave Chinner <david@fromorbit.com> cc: linux-doc@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-afs@lists.infradead.org cc: ceph-devel@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: samba-technical@lists.samba.org cc: linux-fsdevel@vger.kernel.org cc: linux-hardening@vger.kernel.org Link: https://lore.kernel.org/r/d2ad3a3d7bdd794c6efb562d2f2b655fb67756b9.camel@kernel.org/ [1] Link: https://lore.kernel.org/r/20220517210230.864239-1-keescook@chromium.org/ [2] Link: https://lore.kernel.org/r/20220518202212.2322058-1-keescook@chromium.org/ [3] Link: https://lore.kernel.org/r/20220524101205.GI2306852@dread.disaster.area/ [4] Link: https://lore.kernel.org/r/165296786831.3591209.12111293034669289733.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/165305805651.4094995.7763502506786714216.stgit@warthog.procyon.org.uk # v2 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-06-09 20:46:04 +00:00
static inline struct netfs_inode *netfs_inode(struct inode *inode)
netfs: Add a netfs inode context Add a netfs_i_context struct that should be included in the network filesystem's own inode struct wrapper, directly after the VFS's inode struct, e.g.: struct my_inode { struct { /* These must be contiguous */ struct inode vfs_inode; struct netfs_i_context netfs_ctx; }; }; The netfs_i_context struct so far contains a single field for the network filesystem to use - the cache cookie: struct netfs_i_context { ... struct fscache_cookie *cache; }; Three functions are provided to help with this: (1) void netfs_i_context_init(struct inode *inode, const struct netfs_request_ops *ops); Initialise the netfs context and set the operations. (2) struct netfs_i_context *netfs_i_context(struct inode *inode); Find the netfs context from the VFS inode. (3) struct inode *netfs_inode(struct netfs_i_context *ctx); Find the VFS inode from the netfs context. Changes ======= ver #4) - Fix netfs_is_cache_enabled() to check cookie->cache_priv to see if a cache is present[3]. - Fix netfs_skip_folio_read() to zero out all of the page, not just some of it[3]. ver #3) - Split out the bit to move ceph cap-getting on readahead into ceph_init_request()[1]. - Stick in a comment to the netfs inode structs indicating the contiguity requirements[2]. ver #2) - Adjust documentation to match. - Use "#if IS_ENABLED()" in netfs_i_cookie(), not "#ifdef". - Move the cap check from ceph_readahead() to ceph_init_request() to be called from netfslib. - Remove ceph_readahead() and use netfs_readahead() directly instead. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com Link: https://lore.kernel.org/r/8af0d47f17d89c06bbf602496dd845f2b0bf25b3.camel@kernel.org/ [1] Link: https://lore.kernel.org/r/beaf4f6a6c2575ed489adb14b257253c868f9a5c.camel@kernel.org/ [2] Link: https://lore.kernel.org/r/3536452.1647421585@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/164622984545.3564931.15691742939278418580.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/164678213320.1200972.16807551936267647470.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/164692909854.2099075.9535537286264248057.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/306388.1647595110@warthog.procyon.org.uk/ # v4
2021-06-29 21:37:05 +00:00
{
netfs: Fix gcc-12 warning by embedding vfs inode in netfs_i_context While randstruct was satisfied with using an open-coded "void *" offset cast for the netfs_i_context <-> inode casting, __builtin_object_size() as used by FORTIFY_SOURCE was not as easily fooled. This was causing the following complaint[1] from gcc v12: In file included from include/linux/string.h:253, from include/linux/ceph/ceph_debug.h:7, from fs/ceph/inode.c:2: In function 'fortify_memset_chk', inlined from 'netfs_i_context_init' at include/linux/netfs.h:326:2, inlined from 'ceph_alloc_inode' at fs/ceph/inode.c:463:2: include/linux/fortify-string.h:242:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning] 242 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix this by embedding a struct inode into struct netfs_i_context (which should perhaps be renamed to struct netfs_inode). The struct inode vfs_inode fields are then removed from the 9p, afs, ceph and cifs inode structs and vfs_inode is then simply changed to "netfs.inode" in those filesystems. Further, rename netfs_i_context to netfs_inode, get rid of the netfs_inode() function that converted a netfs_i_context pointer to an inode pointer (that can now be done with &ctx->inode) and rename the netfs_i_context() function to netfs_inode() (which is now a wrapper around container_of()). Most of the changes were done with: perl -p -i -e 's/vfs_inode/netfs.inode/'g \ `git grep -l 'vfs_inode' -- fs/{9p,afs,ceph,cifs}/*.[ch]` Kees suggested doing it with a pair structure[2] and a special declarator to insert that into the network filesystem's inode wrapper[3], but I think it's cleaner to embed it - and then it doesn't matter if struct randomisation reorders things. Dave Chinner suggested using a filesystem-specific VFS_I() function in each filesystem to convert that filesystem's own inode wrapper struct into the VFS inode struct[4]. Version #2: - Fix a couple of missed name changes due to a disabled cifs option. - Rename nfs_i_context to nfs_inode - Use "netfs" instead of "nic" as the member name in per-fs inode wrapper structs. [ This also undoes commit 507160f46c55 ("netfs: gcc-12: temporarily disable '-Wattribute-warning' for now") that is no longer needed ] Fixes: bc899ee1c898 ("netfs: Add a netfs inode context") Reported-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> cc: Jonathan Corbet <corbet@lwn.net> cc: Eric Van Hensbergen <ericvh@gmail.com> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Ilya Dryomov <idryomov@gmail.com> cc: Steve French <smfrench@gmail.com> cc: William Kucharski <william.kucharski@oracle.com> cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> cc: Dave Chinner <david@fromorbit.com> cc: linux-doc@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-afs@lists.infradead.org cc: ceph-devel@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: samba-technical@lists.samba.org cc: linux-fsdevel@vger.kernel.org cc: linux-hardening@vger.kernel.org Link: https://lore.kernel.org/r/d2ad3a3d7bdd794c6efb562d2f2b655fb67756b9.camel@kernel.org/ [1] Link: https://lore.kernel.org/r/20220517210230.864239-1-keescook@chromium.org/ [2] Link: https://lore.kernel.org/r/20220518202212.2322058-1-keescook@chromium.org/ [3] Link: https://lore.kernel.org/r/20220524101205.GI2306852@dread.disaster.area/ [4] Link: https://lore.kernel.org/r/165296786831.3591209.12111293034669289733.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/165305805651.4094995.7763502506786714216.stgit@warthog.procyon.org.uk # v2 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-06-09 20:46:04 +00:00
return container_of(inode, struct netfs_inode, inode);
netfs: Add a netfs inode context Add a netfs_i_context struct that should be included in the network filesystem's own inode struct wrapper, directly after the VFS's inode struct, e.g.: struct my_inode { struct { /* These must be contiguous */ struct inode vfs_inode; struct netfs_i_context netfs_ctx; }; }; The netfs_i_context struct so far contains a single field for the network filesystem to use - the cache cookie: struct netfs_i_context { ... struct fscache_cookie *cache; }; Three functions are provided to help with this: (1) void netfs_i_context_init(struct inode *inode, const struct netfs_request_ops *ops); Initialise the netfs context and set the operations. (2) struct netfs_i_context *netfs_i_context(struct inode *inode); Find the netfs context from the VFS inode. (3) struct inode *netfs_inode(struct netfs_i_context *ctx); Find the VFS inode from the netfs context. Changes ======= ver #4) - Fix netfs_is_cache_enabled() to check cookie->cache_priv to see if a cache is present[3]. - Fix netfs_skip_folio_read() to zero out all of the page, not just some of it[3]. ver #3) - Split out the bit to move ceph cap-getting on readahead into ceph_init_request()[1]. - Stick in a comment to the netfs inode structs indicating the contiguity requirements[2]. ver #2) - Adjust documentation to match. - Use "#if IS_ENABLED()" in netfs_i_cookie(), not "#ifdef". - Move the cap check from ceph_readahead() to ceph_init_request() to be called from netfslib. - Remove ceph_readahead() and use netfs_readahead() directly instead. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com Link: https://lore.kernel.org/r/8af0d47f17d89c06bbf602496dd845f2b0bf25b3.camel@kernel.org/ [1] Link: https://lore.kernel.org/r/beaf4f6a6c2575ed489adb14b257253c868f9a5c.camel@kernel.org/ [2] Link: https://lore.kernel.org/r/3536452.1647421585@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/164622984545.3564931.15691742939278418580.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/164678213320.1200972.16807551936267647470.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/164692909854.2099075.9535537286264248057.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/306388.1647595110@warthog.procyon.org.uk/ # v4
2021-06-29 21:37:05 +00:00
}
/**
netfs: Fix gcc-12 warning by embedding vfs inode in netfs_i_context While randstruct was satisfied with using an open-coded "void *" offset cast for the netfs_i_context <-> inode casting, __builtin_object_size() as used by FORTIFY_SOURCE was not as easily fooled. This was causing the following complaint[1] from gcc v12: In file included from include/linux/string.h:253, from include/linux/ceph/ceph_debug.h:7, from fs/ceph/inode.c:2: In function 'fortify_memset_chk', inlined from 'netfs_i_context_init' at include/linux/netfs.h:326:2, inlined from 'ceph_alloc_inode' at fs/ceph/inode.c:463:2: include/linux/fortify-string.h:242:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning] 242 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix this by embedding a struct inode into struct netfs_i_context (which should perhaps be renamed to struct netfs_inode). The struct inode vfs_inode fields are then removed from the 9p, afs, ceph and cifs inode structs and vfs_inode is then simply changed to "netfs.inode" in those filesystems. Further, rename netfs_i_context to netfs_inode, get rid of the netfs_inode() function that converted a netfs_i_context pointer to an inode pointer (that can now be done with &ctx->inode) and rename the netfs_i_context() function to netfs_inode() (which is now a wrapper around container_of()). Most of the changes were done with: perl -p -i -e 's/vfs_inode/netfs.inode/'g \ `git grep -l 'vfs_inode' -- fs/{9p,afs,ceph,cifs}/*.[ch]` Kees suggested doing it with a pair structure[2] and a special declarator to insert that into the network filesystem's inode wrapper[3], but I think it's cleaner to embed it - and then it doesn't matter if struct randomisation reorders things. Dave Chinner suggested using a filesystem-specific VFS_I() function in each filesystem to convert that filesystem's own inode wrapper struct into the VFS inode struct[4]. Version #2: - Fix a couple of missed name changes due to a disabled cifs option. - Rename nfs_i_context to nfs_inode - Use "netfs" instead of "nic" as the member name in per-fs inode wrapper structs. [ This also undoes commit 507160f46c55 ("netfs: gcc-12: temporarily disable '-Wattribute-warning' for now") that is no longer needed ] Fixes: bc899ee1c898 ("netfs: Add a netfs inode context") Reported-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> cc: Jonathan Corbet <corbet@lwn.net> cc: Eric Van Hensbergen <ericvh@gmail.com> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Ilya Dryomov <idryomov@gmail.com> cc: Steve French <smfrench@gmail.com> cc: William Kucharski <william.kucharski@oracle.com> cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> cc: Dave Chinner <david@fromorbit.com> cc: linux-doc@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-afs@lists.infradead.org cc: ceph-devel@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: samba-technical@lists.samba.org cc: linux-fsdevel@vger.kernel.org cc: linux-hardening@vger.kernel.org Link: https://lore.kernel.org/r/d2ad3a3d7bdd794c6efb562d2f2b655fb67756b9.camel@kernel.org/ [1] Link: https://lore.kernel.org/r/20220517210230.864239-1-keescook@chromium.org/ [2] Link: https://lore.kernel.org/r/20220518202212.2322058-1-keescook@chromium.org/ [3] Link: https://lore.kernel.org/r/20220524101205.GI2306852@dread.disaster.area/ [4] Link: https://lore.kernel.org/r/165296786831.3591209.12111293034669289733.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/165305805651.4094995.7763502506786714216.stgit@warthog.procyon.org.uk # v2 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-06-09 20:46:04 +00:00
* netfs_inode_init - Initialise a netfslib inode context
* @ctx: The netfs inode to initialise
netfs: Add a netfs inode context Add a netfs_i_context struct that should be included in the network filesystem's own inode struct wrapper, directly after the VFS's inode struct, e.g.: struct my_inode { struct { /* These must be contiguous */ struct inode vfs_inode; struct netfs_i_context netfs_ctx; }; }; The netfs_i_context struct so far contains a single field for the network filesystem to use - the cache cookie: struct netfs_i_context { ... struct fscache_cookie *cache; }; Three functions are provided to help with this: (1) void netfs_i_context_init(struct inode *inode, const struct netfs_request_ops *ops); Initialise the netfs context and set the operations. (2) struct netfs_i_context *netfs_i_context(struct inode *inode); Find the netfs context from the VFS inode. (3) struct inode *netfs_inode(struct netfs_i_context *ctx); Find the VFS inode from the netfs context. Changes ======= ver #4) - Fix netfs_is_cache_enabled() to check cookie->cache_priv to see if a cache is present[3]. - Fix netfs_skip_folio_read() to zero out all of the page, not just some of it[3]. ver #3) - Split out the bit to move ceph cap-getting on readahead into ceph_init_request()[1]. - Stick in a comment to the netfs inode structs indicating the contiguity requirements[2]. ver #2) - Adjust documentation to match. - Use "#if IS_ENABLED()" in netfs_i_cookie(), not "#ifdef". - Move the cap check from ceph_readahead() to ceph_init_request() to be called from netfslib. - Remove ceph_readahead() and use netfs_readahead() directly instead. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com Link: https://lore.kernel.org/r/8af0d47f17d89c06bbf602496dd845f2b0bf25b3.camel@kernel.org/ [1] Link: https://lore.kernel.org/r/beaf4f6a6c2575ed489adb14b257253c868f9a5c.camel@kernel.org/ [2] Link: https://lore.kernel.org/r/3536452.1647421585@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/164622984545.3564931.15691742939278418580.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/164678213320.1200972.16807551936267647470.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/164692909854.2099075.9535537286264248057.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/306388.1647595110@warthog.procyon.org.uk/ # v4
2021-06-29 21:37:05 +00:00
* @ops: The netfs's operations list
netfs: Optimise away reads above the point at which there can be no data Track the file position above which the server is not expected to have any data (the "zero point") and preemptively assume that we can satisfy requests by filling them with zeroes locally rather than attempting to download them if they're over that line - even if we've written data back to the server. Assume that any data that was written back above that position is held in the local cache. Note that we have to split requests that straddle the line. Make use of this to optimise away some reads from the server. We need to set the zero point in the following circumstances: (1) When we see an extant remote inode and have no cache for it, we set the zero_point to i_size. (2) On local inode creation, we set zero_point to 0. (3) On local truncation down, we reduce zero_point to the new i_size if the new i_size is lower. (4) On local truncation up, we don't change zero_point. (5) On local modification, we don't change zero_point. (6) On remote invalidation, we set zero_point to the new i_size. (7) If stored data is discarded from the pagecache or culled from fscache, we must set zero_point above that if the data also got written to the server. (8) If dirty data is written back to the server, but not fscache, we must set zero_point above that. (9) If a direct I/O write is made, set zero_point above that. Assuming the above, any read from the server at or above the zero_point position will return all zeroes. The zero_point value can be stored in the cache, provided the above rules are applied to it by any code that culls part of the local cache. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org cc: linux-mm@kvack.org
2023-11-24 13:39:02 +00:00
* @use_zero_point: True to use the zero_point read optimisation
netfs: Add a netfs inode context Add a netfs_i_context struct that should be included in the network filesystem's own inode struct wrapper, directly after the VFS's inode struct, e.g.: struct my_inode { struct { /* These must be contiguous */ struct inode vfs_inode; struct netfs_i_context netfs_ctx; }; }; The netfs_i_context struct so far contains a single field for the network filesystem to use - the cache cookie: struct netfs_i_context { ... struct fscache_cookie *cache; }; Three functions are provided to help with this: (1) void netfs_i_context_init(struct inode *inode, const struct netfs_request_ops *ops); Initialise the netfs context and set the operations. (2) struct netfs_i_context *netfs_i_context(struct inode *inode); Find the netfs context from the VFS inode. (3) struct inode *netfs_inode(struct netfs_i_context *ctx); Find the VFS inode from the netfs context. Changes ======= ver #4) - Fix netfs_is_cache_enabled() to check cookie->cache_priv to see if a cache is present[3]. - Fix netfs_skip_folio_read() to zero out all of the page, not just some of it[3]. ver #3) - Split out the bit to move ceph cap-getting on readahead into ceph_init_request()[1]. - Stick in a comment to the netfs inode structs indicating the contiguity requirements[2]. ver #2) - Adjust documentation to match. - Use "#if IS_ENABLED()" in netfs_i_cookie(), not "#ifdef". - Move the cap check from ceph_readahead() to ceph_init_request() to be called from netfslib. - Remove ceph_readahead() and use netfs_readahead() directly instead. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com Link: https://lore.kernel.org/r/8af0d47f17d89c06bbf602496dd845f2b0bf25b3.camel@kernel.org/ [1] Link: https://lore.kernel.org/r/beaf4f6a6c2575ed489adb14b257253c868f9a5c.camel@kernel.org/ [2] Link: https://lore.kernel.org/r/3536452.1647421585@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/164622984545.3564931.15691742939278418580.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/164678213320.1200972.16807551936267647470.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/164692909854.2099075.9535537286264248057.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/306388.1647595110@warthog.procyon.org.uk/ # v4
2021-06-29 21:37:05 +00:00
*
* Initialise the netfs library context struct. This is expected to follow on
* directly from the VFS inode struct.
*/
static inline void netfs_inode_init(struct netfs_inode *ctx,
netfs: Optimise away reads above the point at which there can be no data Track the file position above which the server is not expected to have any data (the "zero point") and preemptively assume that we can satisfy requests by filling them with zeroes locally rather than attempting to download them if they're over that line - even if we've written data back to the server. Assume that any data that was written back above that position is held in the local cache. Note that we have to split requests that straddle the line. Make use of this to optimise away some reads from the server. We need to set the zero point in the following circumstances: (1) When we see an extant remote inode and have no cache for it, we set the zero_point to i_size. (2) On local inode creation, we set zero_point to 0. (3) On local truncation down, we reduce zero_point to the new i_size if the new i_size is lower. (4) On local truncation up, we don't change zero_point. (5) On local modification, we don't change zero_point. (6) On remote invalidation, we set zero_point to the new i_size. (7) If stored data is discarded from the pagecache or culled from fscache, we must set zero_point above that if the data also got written to the server. (8) If dirty data is written back to the server, but not fscache, we must set zero_point above that. (9) If a direct I/O write is made, set zero_point above that. Assuming the above, any read from the server at or above the zero_point position will return all zeroes. The zero_point value can be stored in the cache, provided the above rules are applied to it by any code that culls part of the local cache. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org cc: linux-mm@kvack.org
2023-11-24 13:39:02 +00:00
const struct netfs_request_ops *ops,
bool use_zero_point)
netfs: Add a netfs inode context Add a netfs_i_context struct that should be included in the network filesystem's own inode struct wrapper, directly after the VFS's inode struct, e.g.: struct my_inode { struct { /* These must be contiguous */ struct inode vfs_inode; struct netfs_i_context netfs_ctx; }; }; The netfs_i_context struct so far contains a single field for the network filesystem to use - the cache cookie: struct netfs_i_context { ... struct fscache_cookie *cache; }; Three functions are provided to help with this: (1) void netfs_i_context_init(struct inode *inode, const struct netfs_request_ops *ops); Initialise the netfs context and set the operations. (2) struct netfs_i_context *netfs_i_context(struct inode *inode); Find the netfs context from the VFS inode. (3) struct inode *netfs_inode(struct netfs_i_context *ctx); Find the VFS inode from the netfs context. Changes ======= ver #4) - Fix netfs_is_cache_enabled() to check cookie->cache_priv to see if a cache is present[3]. - Fix netfs_skip_folio_read() to zero out all of the page, not just some of it[3]. ver #3) - Split out the bit to move ceph cap-getting on readahead into ceph_init_request()[1]. - Stick in a comment to the netfs inode structs indicating the contiguity requirements[2]. ver #2) - Adjust documentation to match. - Use "#if IS_ENABLED()" in netfs_i_cookie(), not "#ifdef". - Move the cap check from ceph_readahead() to ceph_init_request() to be called from netfslib. - Remove ceph_readahead() and use netfs_readahead() directly instead. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com Link: https://lore.kernel.org/r/8af0d47f17d89c06bbf602496dd845f2b0bf25b3.camel@kernel.org/ [1] Link: https://lore.kernel.org/r/beaf4f6a6c2575ed489adb14b257253c868f9a5c.camel@kernel.org/ [2] Link: https://lore.kernel.org/r/3536452.1647421585@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/164622984545.3564931.15691742939278418580.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/164678213320.1200972.16807551936267647470.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/164692909854.2099075.9535537286264248057.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/306388.1647595110@warthog.procyon.org.uk/ # v4
2021-06-29 21:37:05 +00:00
{
ctx->ops = ops;
ctx->remote_i_size = i_size_read(&ctx->inode);
netfs: Optimise away reads above the point at which there can be no data Track the file position above which the server is not expected to have any data (the "zero point") and preemptively assume that we can satisfy requests by filling them with zeroes locally rather than attempting to download them if they're over that line - even if we've written data back to the server. Assume that any data that was written back above that position is held in the local cache. Note that we have to split requests that straddle the line. Make use of this to optimise away some reads from the server. We need to set the zero point in the following circumstances: (1) When we see an extant remote inode and have no cache for it, we set the zero_point to i_size. (2) On local inode creation, we set zero_point to 0. (3) On local truncation down, we reduce zero_point to the new i_size if the new i_size is lower. (4) On local truncation up, we don't change zero_point. (5) On local modification, we don't change zero_point. (6) On remote invalidation, we set zero_point to the new i_size. (7) If stored data is discarded from the pagecache or culled from fscache, we must set zero_point above that if the data also got written to the server. (8) If dirty data is written back to the server, but not fscache, we must set zero_point above that. (9) If a direct I/O write is made, set zero_point above that. Assuming the above, any read from the server at or above the zero_point position will return all zeroes. The zero_point value can be stored in the cache, provided the above rules are applied to it by any code that culls part of the local cache. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org cc: linux-mm@kvack.org
2023-11-24 13:39:02 +00:00
ctx->zero_point = LLONG_MAX;
ctx->flags = 0;
netfs, 9p: Fix race between umount and async request completion There's a problem in 9p's interaction with netfslib whereby a crash occurs because the 9p_fid structs get forcibly destroyed during client teardown (without paying attention to their refcounts) before netfslib has finished with them. However, it's not a simple case of deferring the clunking that p9_fid_put() does as that requires the p9_client record to still be present. The problem is that netfslib has to unlock pages and clear the IN_PROGRESS flag before destroying the objects involved - including the fid - and, in any case, nothing checks to see if writeback completed barring looking at the page flags. Fix this by keeping a count of outstanding I/O requests (of any type) and waiting for it to quiesce during inode eviction. Reported-by: syzbot+df038d463cca332e8414@syzkaller.appspotmail.com Link: https://lore.kernel.org/all/0000000000005be0aa061846f8d6@google.com/ Reported-by: syzbot+d7c7a495a5e466c031b6@syzkaller.appspotmail.com Link: https://lore.kernel.org/all/000000000000b86c5e06130da9c6@google.com/ Reported-by: syzbot+1527696d41a634cc1819@syzkaller.appspotmail.com Link: https://lore.kernel.org/all/000000000000041f960618206d7e@google.com/ Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/755891.1716560771@warthog.procyon.org.uk Tested-by: syzbot+d7c7a495a5e466c031b6@syzkaller.appspotmail.com Reviewed-by: Dominique Martinet <asmadeus@codewreck.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Jeff Layton <jlayton@kernel.org> cc: Steve French <sfrench@samba.org> cc: Hillf Danton <hdanton@sina.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: linux-cifs@vger.kernel.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Reported-and-tested-by: syzbot+d7c7a495a5e466c031b6@syzkaller.appspotmail.com Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-05-24 14:26:11 +00:00
atomic_set(&ctx->io_count, 0);
netfs: Fix gcc-12 warning by embedding vfs inode in netfs_i_context While randstruct was satisfied with using an open-coded "void *" offset cast for the netfs_i_context <-> inode casting, __builtin_object_size() as used by FORTIFY_SOURCE was not as easily fooled. This was causing the following complaint[1] from gcc v12: In file included from include/linux/string.h:253, from include/linux/ceph/ceph_debug.h:7, from fs/ceph/inode.c:2: In function 'fortify_memset_chk', inlined from 'netfs_i_context_init' at include/linux/netfs.h:326:2, inlined from 'ceph_alloc_inode' at fs/ceph/inode.c:463:2: include/linux/fortify-string.h:242:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning] 242 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Fix this by embedding a struct inode into struct netfs_i_context (which should perhaps be renamed to struct netfs_inode). The struct inode vfs_inode fields are then removed from the 9p, afs, ceph and cifs inode structs and vfs_inode is then simply changed to "netfs.inode" in those filesystems. Further, rename netfs_i_context to netfs_inode, get rid of the netfs_inode() function that converted a netfs_i_context pointer to an inode pointer (that can now be done with &ctx->inode) and rename the netfs_i_context() function to netfs_inode() (which is now a wrapper around container_of()). Most of the changes were done with: perl -p -i -e 's/vfs_inode/netfs.inode/'g \ `git grep -l 'vfs_inode' -- fs/{9p,afs,ceph,cifs}/*.[ch]` Kees suggested doing it with a pair structure[2] and a special declarator to insert that into the network filesystem's inode wrapper[3], but I think it's cleaner to embed it - and then it doesn't matter if struct randomisation reorders things. Dave Chinner suggested using a filesystem-specific VFS_I() function in each filesystem to convert that filesystem's own inode wrapper struct into the VFS inode struct[4]. Version #2: - Fix a couple of missed name changes due to a disabled cifs option. - Rename nfs_i_context to nfs_inode - Use "netfs" instead of "nic" as the member name in per-fs inode wrapper structs. [ This also undoes commit 507160f46c55 ("netfs: gcc-12: temporarily disable '-Wattribute-warning' for now") that is no longer needed ] Fixes: bc899ee1c898 ("netfs: Add a netfs inode context") Reported-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Xiubo Li <xiubli@redhat.com> cc: Jonathan Corbet <corbet@lwn.net> cc: Eric Van Hensbergen <ericvh@gmail.com> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: Ilya Dryomov <idryomov@gmail.com> cc: Steve French <smfrench@gmail.com> cc: William Kucharski <william.kucharski@oracle.com> cc: "Matthew Wilcox (Oracle)" <willy@infradead.org> cc: Dave Chinner <david@fromorbit.com> cc: linux-doc@vger.kernel.org cc: v9fs-developer@lists.sourceforge.net cc: linux-afs@lists.infradead.org cc: ceph-devel@vger.kernel.org cc: linux-cifs@vger.kernel.org cc: samba-technical@lists.samba.org cc: linux-fsdevel@vger.kernel.org cc: linux-hardening@vger.kernel.org Link: https://lore.kernel.org/r/d2ad3a3d7bdd794c6efb562d2f2b655fb67756b9.camel@kernel.org/ [1] Link: https://lore.kernel.org/r/20220517210230.864239-1-keescook@chromium.org/ [2] Link: https://lore.kernel.org/r/20220518202212.2322058-1-keescook@chromium.org/ [3] Link: https://lore.kernel.org/r/20220524101205.GI2306852@dread.disaster.area/ [4] Link: https://lore.kernel.org/r/165296786831.3591209.12111293034669289733.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/165305805651.4094995.7763502506786714216.stgit@warthog.procyon.org.uk # v2 Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-06-09 20:46:04 +00:00
#if IS_ENABLED(CONFIG_FSCACHE)
ctx->cache = NULL;
#endif
netfs: New writeback implementation The current netfslib writeback implementation creates writeback requests of contiguous folio data and then separately tiles subrequests over the space twice, once for the server and once for the cache. This creates a few issues: (1) Every time there's a discontiguity or a change between writing to only one destination or writing to both, it must create a new request. This makes it harder to do vectored writes. (2) The folios don't have the writeback mark removed until the end of the request - and a request could be hundreds of megabytes. (3) In future, I want to support a larger cache granularity, which will require aggregation of some folios that contain unmodified data (which only need to go to the cache) and some which contain modifications (which need to be uploaded and stored to the cache) - but, currently, these are treated as discontiguous. There's also a move to get everyone to use writeback_iter() to extract writable folios from the pagecache. That said, currently writeback_iter() has some issues that make it less than ideal: (1) there's no way to cancel the iteration, even if you find a "temporary" error that means the current folio and all subsequent folios are going to fail; (2) there's no way to filter the folios being written back - something that will impact Ceph with it's ordered snap system; (3) and if you get a folio you can't immediately deal with (say you need to flush the preceding writes), you are left with a folio hanging in the locked state for the duration, when really we should unlock it and relock it later. In this new implementation, I use writeback_iter() to pump folios, progressively creating two parallel, but separate streams and cleaning up the finished folios as the subrequests complete. Either or both streams can contain gaps, and the subrequests in each stream can be of variable size, don't need to align with each other and don't need to align with the folios. Indeed, subrequests can cross folio boundaries, may cover several folios or a folio may be spanned by multiple folios, e.g.: +---+---+-----+-----+---+----------+ Folios: | | | | | | | +---+---+-----+-----+---+----------+ +------+------+ +----+----+ Upload: | | |.....| | | +------+------+ +----+----+ +------+------+------+------+------+ Cache: | | | | | | +------+------+------+------+------+ The progressive subrequest construction permits the algorithm to be preparing both the next upload to the server and the next write to the cache whilst the previous ones are already in progress. Throttling can be applied to control the rate of production of subrequests - and, in any case, we probably want to write them to the server in ascending order, particularly if the file will be extended. Content crypto can also be prepared at the same time as the subrequests and run asynchronously, with the prepped requests being stalled until the crypto catches up with them. This might also be useful for transport crypto, but that happens at a lower layer, so probably would be harder to pull off. The algorithm is split into three parts: (1) The issuer. This walks through the data, packaging it up, encrypting it and creating subrequests. The part of this that generates subrequests only deals with file positions and spans and so is usable for DIO/unbuffered writes as well as buffered writes. (2) The collector. This asynchronously collects completed subrequests, unlocks folios, frees crypto buffers and performs any retries. This runs in a work queue so that the issuer can return to the caller for writeback (so that the VM can have its kswapd thread back) or async writes. (3) The retryer. This pauses the issuer, waits for all outstanding subrequests to complete and then goes through the failed subrequests to reissue them. This may involve reprepping them (with cifs, the credits must be renegotiated, and a subrequest may need splitting), and doing RMW for content crypto if there's a conflicting change on the server. [!] Note that some of the functions are prefixed with "new_" to avoid clashes with existing functions. These will be renamed in a later patch that cuts over to the new algorithm. Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Dominique Martinet <asmadeus@codewreck.org> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org
2024-03-18 16:52:05 +00:00
mutex_init(&ctx->wb_lock);
netfs: Optimise away reads above the point at which there can be no data Track the file position above which the server is not expected to have any data (the "zero point") and preemptively assume that we can satisfy requests by filling them with zeroes locally rather than attempting to download them if they're over that line - even if we've written data back to the server. Assume that any data that was written back above that position is held in the local cache. Note that we have to split requests that straddle the line. Make use of this to optimise away some reads from the server. We need to set the zero point in the following circumstances: (1) When we see an extant remote inode and have no cache for it, we set the zero_point to i_size. (2) On local inode creation, we set zero_point to 0. (3) On local truncation down, we reduce zero_point to the new i_size if the new i_size is lower. (4) On local truncation up, we don't change zero_point. (5) On local modification, we don't change zero_point. (6) On remote invalidation, we set zero_point to the new i_size. (7) If stored data is discarded from the pagecache or culled from fscache, we must set zero_point above that if the data also got written to the server. (8) If dirty data is written back to the server, but not fscache, we must set zero_point above that. (9) If a direct I/O write is made, set zero_point above that. Assuming the above, any read from the server at or above the zero_point position will return all zeroes. The zero_point value can be stored in the cache, provided the above rules are applied to it by any code that culls part of the local cache. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org cc: linux-mm@kvack.org
2023-11-24 13:39:02 +00:00
/* ->releasepage() drives zero_point */
if (use_zero_point) {
ctx->zero_point = ctx->remote_i_size;
mapping_set_release_always(ctx->inode.i_mapping);
}
}
/**
* netfs_resize_file - Note that a file got resized
* @ctx: The netfs inode being resized
* @new_i_size: The new file size
netfs: Optimise away reads above the point at which there can be no data Track the file position above which the server is not expected to have any data (the "zero point") and preemptively assume that we can satisfy requests by filling them with zeroes locally rather than attempting to download them if they're over that line - even if we've written data back to the server. Assume that any data that was written back above that position is held in the local cache. Note that we have to split requests that straddle the line. Make use of this to optimise away some reads from the server. We need to set the zero point in the following circumstances: (1) When we see an extant remote inode and have no cache for it, we set the zero_point to i_size. (2) On local inode creation, we set zero_point to 0. (3) On local truncation down, we reduce zero_point to the new i_size if the new i_size is lower. (4) On local truncation up, we don't change zero_point. (5) On local modification, we don't change zero_point. (6) On remote invalidation, we set zero_point to the new i_size. (7) If stored data is discarded from the pagecache or culled from fscache, we must set zero_point above that if the data also got written to the server. (8) If dirty data is written back to the server, but not fscache, we must set zero_point above that. (9) If a direct I/O write is made, set zero_point above that. Assuming the above, any read from the server at or above the zero_point position will return all zeroes. The zero_point value can be stored in the cache, provided the above rules are applied to it by any code that culls part of the local cache. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org cc: linux-mm@kvack.org
2023-11-24 13:39:02 +00:00
* @changed_on_server: The change was applied to the server
*
* Inform the netfs lib that a file got resized so that it can adjust its state.
*/
netfs: Optimise away reads above the point at which there can be no data Track the file position above which the server is not expected to have any data (the "zero point") and preemptively assume that we can satisfy requests by filling them with zeroes locally rather than attempting to download them if they're over that line - even if we've written data back to the server. Assume that any data that was written back above that position is held in the local cache. Note that we have to split requests that straddle the line. Make use of this to optimise away some reads from the server. We need to set the zero point in the following circumstances: (1) When we see an extant remote inode and have no cache for it, we set the zero_point to i_size. (2) On local inode creation, we set zero_point to 0. (3) On local truncation down, we reduce zero_point to the new i_size if the new i_size is lower. (4) On local truncation up, we don't change zero_point. (5) On local modification, we don't change zero_point. (6) On remote invalidation, we set zero_point to the new i_size. (7) If stored data is discarded from the pagecache or culled from fscache, we must set zero_point above that if the data also got written to the server. (8) If dirty data is written back to the server, but not fscache, we must set zero_point above that. (9) If a direct I/O write is made, set zero_point above that. Assuming the above, any read from the server at or above the zero_point position will return all zeroes. The zero_point value can be stored in the cache, provided the above rules are applied to it by any code that culls part of the local cache. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org cc: linux-mm@kvack.org
2023-11-24 13:39:02 +00:00
static inline void netfs_resize_file(struct netfs_inode *ctx, loff_t new_i_size,
bool changed_on_server)
{
netfs: Optimise away reads above the point at which there can be no data Track the file position above which the server is not expected to have any data (the "zero point") and preemptively assume that we can satisfy requests by filling them with zeroes locally rather than attempting to download them if they're over that line - even if we've written data back to the server. Assume that any data that was written back above that position is held in the local cache. Note that we have to split requests that straddle the line. Make use of this to optimise away some reads from the server. We need to set the zero point in the following circumstances: (1) When we see an extant remote inode and have no cache for it, we set the zero_point to i_size. (2) On local inode creation, we set zero_point to 0. (3) On local truncation down, we reduce zero_point to the new i_size if the new i_size is lower. (4) On local truncation up, we don't change zero_point. (5) On local modification, we don't change zero_point. (6) On remote invalidation, we set zero_point to the new i_size. (7) If stored data is discarded from the pagecache or culled from fscache, we must set zero_point above that if the data also got written to the server. (8) If dirty data is written back to the server, but not fscache, we must set zero_point above that. (9) If a direct I/O write is made, set zero_point above that. Assuming the above, any read from the server at or above the zero_point position will return all zeroes. The zero_point value can be stored in the cache, provided the above rules are applied to it by any code that culls part of the local cache. Signed-off-by: David Howells <dhowells@redhat.com> cc: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com cc: linux-fsdevel@vger.kernel.org cc: linux-mm@kvack.org
2023-11-24 13:39:02 +00:00
if (changed_on_server)
ctx->remote_i_size = new_i_size;
if (new_i_size < ctx->zero_point)
ctx->zero_point = new_i_size;
netfs: Add a netfs inode context Add a netfs_i_context struct that should be included in the network filesystem's own inode struct wrapper, directly after the VFS's inode struct, e.g.: struct my_inode { struct { /* These must be contiguous */ struct inode vfs_inode; struct netfs_i_context netfs_ctx; }; }; The netfs_i_context struct so far contains a single field for the network filesystem to use - the cache cookie: struct netfs_i_context { ... struct fscache_cookie *cache; }; Three functions are provided to help with this: (1) void netfs_i_context_init(struct inode *inode, const struct netfs_request_ops *ops); Initialise the netfs context and set the operations. (2) struct netfs_i_context *netfs_i_context(struct inode *inode); Find the netfs context from the VFS inode. (3) struct inode *netfs_inode(struct netfs_i_context *ctx); Find the VFS inode from the netfs context. Changes ======= ver #4) - Fix netfs_is_cache_enabled() to check cookie->cache_priv to see if a cache is present[3]. - Fix netfs_skip_folio_read() to zero out all of the page, not just some of it[3]. ver #3) - Split out the bit to move ceph cap-getting on readahead into ceph_init_request()[1]. - Stick in a comment to the netfs inode structs indicating the contiguity requirements[2]. ver #2) - Adjust documentation to match. - Use "#if IS_ENABLED()" in netfs_i_cookie(), not "#ifdef". - Move the cap check from ceph_readahead() to ceph_init_request() to be called from netfslib. - Remove ceph_readahead() and use netfs_readahead() directly instead. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com Link: https://lore.kernel.org/r/8af0d47f17d89c06bbf602496dd845f2b0bf25b3.camel@kernel.org/ [1] Link: https://lore.kernel.org/r/beaf4f6a6c2575ed489adb14b257253c868f9a5c.camel@kernel.org/ [2] Link: https://lore.kernel.org/r/3536452.1647421585@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/164622984545.3564931.15691742939278418580.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/164678213320.1200972.16807551936267647470.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/164692909854.2099075.9535537286264248057.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/306388.1647595110@warthog.procyon.org.uk/ # v4
2021-06-29 21:37:05 +00:00
}
/**
* netfs_i_cookie - Get the cache cookie from the inode
* @ctx: The netfs inode to query
netfs: Add a netfs inode context Add a netfs_i_context struct that should be included in the network filesystem's own inode struct wrapper, directly after the VFS's inode struct, e.g.: struct my_inode { struct { /* These must be contiguous */ struct inode vfs_inode; struct netfs_i_context netfs_ctx; }; }; The netfs_i_context struct so far contains a single field for the network filesystem to use - the cache cookie: struct netfs_i_context { ... struct fscache_cookie *cache; }; Three functions are provided to help with this: (1) void netfs_i_context_init(struct inode *inode, const struct netfs_request_ops *ops); Initialise the netfs context and set the operations. (2) struct netfs_i_context *netfs_i_context(struct inode *inode); Find the netfs context from the VFS inode. (3) struct inode *netfs_inode(struct netfs_i_context *ctx); Find the VFS inode from the netfs context. Changes ======= ver #4) - Fix netfs_is_cache_enabled() to check cookie->cache_priv to see if a cache is present[3]. - Fix netfs_skip_folio_read() to zero out all of the page, not just some of it[3]. ver #3) - Split out the bit to move ceph cap-getting on readahead into ceph_init_request()[1]. - Stick in a comment to the netfs inode structs indicating the contiguity requirements[2]. ver #2) - Adjust documentation to match. - Use "#if IS_ENABLED()" in netfs_i_cookie(), not "#ifdef". - Move the cap check from ceph_readahead() to ceph_init_request() to be called from netfslib. - Remove ceph_readahead() and use netfs_readahead() directly instead. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com Link: https://lore.kernel.org/r/8af0d47f17d89c06bbf602496dd845f2b0bf25b3.camel@kernel.org/ [1] Link: https://lore.kernel.org/r/beaf4f6a6c2575ed489adb14b257253c868f9a5c.camel@kernel.org/ [2] Link: https://lore.kernel.org/r/3536452.1647421585@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/164622984545.3564931.15691742939278418580.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/164678213320.1200972.16807551936267647470.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/164692909854.2099075.9535537286264248057.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/306388.1647595110@warthog.procyon.org.uk/ # v4
2021-06-29 21:37:05 +00:00
*
* Get the caching cookie (if enabled) from the network filesystem's inode.
*/
static inline struct fscache_cookie *netfs_i_cookie(struct netfs_inode *ctx)
netfs: Add a netfs inode context Add a netfs_i_context struct that should be included in the network filesystem's own inode struct wrapper, directly after the VFS's inode struct, e.g.: struct my_inode { struct { /* These must be contiguous */ struct inode vfs_inode; struct netfs_i_context netfs_ctx; }; }; The netfs_i_context struct so far contains a single field for the network filesystem to use - the cache cookie: struct netfs_i_context { ... struct fscache_cookie *cache; }; Three functions are provided to help with this: (1) void netfs_i_context_init(struct inode *inode, const struct netfs_request_ops *ops); Initialise the netfs context and set the operations. (2) struct netfs_i_context *netfs_i_context(struct inode *inode); Find the netfs context from the VFS inode. (3) struct inode *netfs_inode(struct netfs_i_context *ctx); Find the VFS inode from the netfs context. Changes ======= ver #4) - Fix netfs_is_cache_enabled() to check cookie->cache_priv to see if a cache is present[3]. - Fix netfs_skip_folio_read() to zero out all of the page, not just some of it[3]. ver #3) - Split out the bit to move ceph cap-getting on readahead into ceph_init_request()[1]. - Stick in a comment to the netfs inode structs indicating the contiguity requirements[2]. ver #2) - Adjust documentation to match. - Use "#if IS_ENABLED()" in netfs_i_cookie(), not "#ifdef". - Move the cap check from ceph_readahead() to ceph_init_request() to be called from netfslib. - Remove ceph_readahead() and use netfs_readahead() directly instead. Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jeff Layton <jlayton@kernel.org> cc: linux-cachefs@redhat.com Link: https://lore.kernel.org/r/8af0d47f17d89c06bbf602496dd845f2b0bf25b3.camel@kernel.org/ [1] Link: https://lore.kernel.org/r/beaf4f6a6c2575ed489adb14b257253c868f9a5c.camel@kernel.org/ [2] Link: https://lore.kernel.org/r/3536452.1647421585@warthog.procyon.org.uk/ [3] Link: https://lore.kernel.org/r/164622984545.3564931.15691742939278418580.stgit@warthog.procyon.org.uk/ # v1 Link: https://lore.kernel.org/r/164678213320.1200972.16807551936267647470.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/164692909854.2099075.9535537286264248057.stgit@warthog.procyon.org.uk/ # v3 Link: https://lore.kernel.org/r/306388.1647595110@warthog.procyon.org.uk/ # v4
2021-06-29 21:37:05 +00:00
{
#if IS_ENABLED(CONFIG_FSCACHE)
return ctx->cache;
#else
return NULL;
#endif
}
netfs, 9p: Fix race between umount and async request completion There's a problem in 9p's interaction with netfslib whereby a crash occurs because the 9p_fid structs get forcibly destroyed during client teardown (without paying attention to their refcounts) before netfslib has finished with them. However, it's not a simple case of deferring the clunking that p9_fid_put() does as that requires the p9_client record to still be present. The problem is that netfslib has to unlock pages and clear the IN_PROGRESS flag before destroying the objects involved - including the fid - and, in any case, nothing checks to see if writeback completed barring looking at the page flags. Fix this by keeping a count of outstanding I/O requests (of any type) and waiting for it to quiesce during inode eviction. Reported-by: syzbot+df038d463cca332e8414@syzkaller.appspotmail.com Link: https://lore.kernel.org/all/0000000000005be0aa061846f8d6@google.com/ Reported-by: syzbot+d7c7a495a5e466c031b6@syzkaller.appspotmail.com Link: https://lore.kernel.org/all/000000000000b86c5e06130da9c6@google.com/ Reported-by: syzbot+1527696d41a634cc1819@syzkaller.appspotmail.com Link: https://lore.kernel.org/all/000000000000041f960618206d7e@google.com/ Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/755891.1716560771@warthog.procyon.org.uk Tested-by: syzbot+d7c7a495a5e466c031b6@syzkaller.appspotmail.com Reviewed-by: Dominique Martinet <asmadeus@codewreck.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Jeff Layton <jlayton@kernel.org> cc: Steve French <sfrench@samba.org> cc: Hillf Danton <hdanton@sina.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: linux-cifs@vger.kernel.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Reported-and-tested-by: syzbot+d7c7a495a5e466c031b6@syzkaller.appspotmail.com Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-05-24 14:26:11 +00:00
/**
* netfs_wait_for_outstanding_io - Wait for outstanding I/O to complete
* @inode: The netfs inode to wait on
netfs, 9p: Fix race between umount and async request completion There's a problem in 9p's interaction with netfslib whereby a crash occurs because the 9p_fid structs get forcibly destroyed during client teardown (without paying attention to their refcounts) before netfslib has finished with them. However, it's not a simple case of deferring the clunking that p9_fid_put() does as that requires the p9_client record to still be present. The problem is that netfslib has to unlock pages and clear the IN_PROGRESS flag before destroying the objects involved - including the fid - and, in any case, nothing checks to see if writeback completed barring looking at the page flags. Fix this by keeping a count of outstanding I/O requests (of any type) and waiting for it to quiesce during inode eviction. Reported-by: syzbot+df038d463cca332e8414@syzkaller.appspotmail.com Link: https://lore.kernel.org/all/0000000000005be0aa061846f8d6@google.com/ Reported-by: syzbot+d7c7a495a5e466c031b6@syzkaller.appspotmail.com Link: https://lore.kernel.org/all/000000000000b86c5e06130da9c6@google.com/ Reported-by: syzbot+1527696d41a634cc1819@syzkaller.appspotmail.com Link: https://lore.kernel.org/all/000000000000041f960618206d7e@google.com/ Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/755891.1716560771@warthog.procyon.org.uk Tested-by: syzbot+d7c7a495a5e466c031b6@syzkaller.appspotmail.com Reviewed-by: Dominique Martinet <asmadeus@codewreck.org> cc: Eric Van Hensbergen <ericvh@kernel.org> cc: Latchesar Ionkov <lucho@ionkov.net> cc: Christian Schoenebeck <linux_oss@crudebyte.com> cc: Jeff Layton <jlayton@kernel.org> cc: Steve French <sfrench@samba.org> cc: Hillf Danton <hdanton@sina.com> cc: v9fs@lists.linux.dev cc: linux-afs@lists.infradead.org cc: linux-cifs@vger.kernel.org cc: netfs@lists.linux.dev cc: linux-fsdevel@vger.kernel.org Reported-and-tested-by: syzbot+d7c7a495a5e466c031b6@syzkaller.appspotmail.com Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-05-24 14:26:11 +00:00
*
* Wait for outstanding I/O requests of any type to complete. This is intended
* to be called from inode eviction routines. This makes sure that any
* resources held by those requests are cleaned up before we let the inode get
* cleaned up.
*/
static inline void netfs_wait_for_outstanding_io(struct inode *inode)
{
struct netfs_inode *ictx = netfs_inode(inode);
wait_var_event(&ictx->io_count, atomic_read(&ictx->io_count) == 0);
}
#endif /* _LINUX_NETFS_H */