irqchip/spear-shirq: Add support for IRQ 0..6
IRQ 0..7 are not supported by the driver for SPEAr320 SOC family.
IRQ 0 is not reserved in SPEAr320 SOC (assigned to GPIOINT).
Furthermore, in SPEAr320s SOC variant, IRQ 0..6 are assigned
as follow:
IRQ 6 - NGPIO_INTR: Combined status of edge programmable
interrupts from GPIO ports
IRQ 5 - TX_OR_INTR: I2S interrupt on Transmit FIFO overrun
IRQ 4 - TX_EMP_INTR: I2S interrupt on Transmit FIFO empty
IRQ 3 - RX_OR_INTR: I2S interrupt on Receive FIFO overrun
IRQ 2 - RX_DA_INTR: I2S interrupt on data available in Receive FIFO
IRQ 1 - Reserved
IRQ 0 - GPIO_INTR: Legacy interrupt from GPIO ports
Add support for these IRQs in SPEAr320 SOC family.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211202095255.165797-6-herve.codina@bootlin.com
This commit is contained in:
parent
0fcfb00b28
commit
f63c862587
|
|
@ -149,6 +149,8 @@ static struct spear_shirq spear320_shirq_ras3 = {
|
|||
.offset = 0,
|
||||
.nr_irqs = 7,
|
||||
.mask = ((0x1 << 7) - 1) << 0,
|
||||
.irq_chip = &dummy_irq_chip,
|
||||
.status_reg = SPEAR320_INT_STS_MASK_REG,
|
||||
};
|
||||
|
||||
static struct spear_shirq spear320_shirq_ras1 = {
|
||||
|
|
|
|||
Loading…
Reference in New Issue