- Have osnoise tracer use memdup_user_nul()
The function osnoise_cpus_write() open codes a kmalloc() and then
a copy_from_user() and then adds a nul byte at the end which is the
same as simply using memdup_user_nul().
- Fix wakeup and irq tracers when failing to acquire calltime
When the wakeup and irq tracers use the function graph tracer for
tracing function times, it saves a timestamp into the fgraph shadow
stack. It is possible that this could fail to be stored. If that
happens, it exits the routine early. These functions also disable
nesting of the operations by incremeting the data "disable" counter.
But if the calltime exits out early, it never increments the counter
back to what it needs to be.
Since there's only a couple of lines of code that does work after
acquiring the calltime, instead of exiting out early, reverse the
if statement to be true if calltime is acquired, and place the code
that is to be done within that if block. The clean up will always
be done after that.
- Fix ring_buffer_map() return value on failure of __rb_map_vma()
If __rb_map_vma() fails in ring_buffer_map(), it does not return
an error. This means the caller will be working against a bad vma
mapping. Have ring_buffer_map() return an error when __rb_map_vma()
fails.
- Fix regression of writing to the trace_marker file
A bug fix was made to change __copy_from_user_inatomic() to
copy_from_user_nofault() in the trace_marker write function.
The trace_marker file is used by applications to write into
it (usually with a file descriptor opened at the start of the
program) to record into the tracing system. It's usually used
in critical sections so the write to trace_marker is highly
optimized.
The reason for copying in an atomic section is that the write
reserves space on the ring buffer and then writes directly into
it. After it writes, it commits the event. The time between
reserve and commit must have preemption disabled.
The trace marker write does not have any locking nor can it
allocate due to the nature of it being a critical path.
Unfortunately, converting __copy_from_user_inatomic() to
copy_from_user_nofault() caused a regression in Android.
Now all the writes from its applications trigger the fault that
is rejected by the _nofault() version that wasn't rejected by
the _inatomic() version. Instead of getting data, it now just
gets a trace buffer filled with:
tracing_mark_write: <faulted>
To fix this, on opening of the trace_marker file, allocate
per CPU buffers that can be used by the write call. Then
when entering the write call, do the following:
preempt_disable();
cpu = smp_processor_id();
buffer = per_cpu_ptr(cpu_buffers, cpu);
do {
cnt = nr_context_switches_cpu(cpu);
migrate_disable();
preempt_enable();
ret = copy_from_user(buffer, ptr, size);
preempt_disable();
migrate_enable();
} while (!ret && cnt != nr_context_switches_cpu(cpu));
if (!ret)
ring_buffer_write(buffer);
preempt_enable();
This works similarly to seqcount. As it must enabled preemption
to do a copy_from_user() into a per CPU buffer, if it gets
preempted, the buffer could be corrupted by another task.
To handle this, read the number of context switches of the current
CPU, disable migration, enable preemption, copy the data from
user space, then immediately disable preemption again.
If the number of context switches is the same, the buffer
is still valid. Otherwise it must be assumed that the buffer may
have been corrupted and it needs to try again.
Now the trace_marker write can get the user data even if it has
to fault it in, and still not grab any locks of its own.
-----BEGIN PGP SIGNATURE-----
iIoEABYKADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCaOfVOhQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qq6oAP9y+zxuouWjtXIz9/z++aykFgKCkeau
XHSSdJdn4R+AQgEA4SE0UWKH0F6Bg7qwyocahMMQ1tIJRrpihfNrKBUmmQ4=
=wDGp
-----END PGP SIGNATURE-----
Merge tag 'trace-v6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing clean up and fixes from Steven Rostedt:
- Have osnoise tracer use memdup_user_nul()
The function osnoise_cpus_write() open codes a kmalloc() and then a
copy_from_user() and then adds a nul byte at the end which is the
same as simply using memdup_user_nul().
- Fix wakeup and irq tracers when failing to acquire calltime
When the wakeup and irq tracers use the function graph tracer for
tracing function times, it saves a timestamp into the fgraph shadow
stack. It is possible that this could fail to be stored. If that
happens, it exits the routine early. These functions also disable
nesting of the operations by incremeting the data "disable" counter.
But if the calltime exits out early, it never increments the counter
back to what it needs to be.
Since there's only a couple of lines of code that does work after
acquiring the calltime, instead of exiting out early, reverse the if
statement to be true if calltime is acquired, and place the code that
is to be done within that if block. The clean up will always be done
after that.
- Fix ring_buffer_map() return value on failure of __rb_map_vma()
If __rb_map_vma() fails in ring_buffer_map(), it does not return an
error. This means the caller will be working against a bad vma
mapping. Have ring_buffer_map() return an error when __rb_map_vma()
fails.
- Fix regression of writing to the trace_marker file
A bug fix was made to change __copy_from_user_inatomic() to
copy_from_user_nofault() in the trace_marker write function. The
trace_marker file is used by applications to write into it (usually
with a file descriptor opened at the start of the program) to record
into the tracing system. It's usually used in critical sections so
the write to trace_marker is highly optimized.
The reason for copying in an atomic section is that the write
reserves space on the ring buffer and then writes directly into it.
After it writes, it commits the event. The time between reserve and
commit must have preemption disabled.
The trace marker write does not have any locking nor can it allocate
due to the nature of it being a critical path.
Unfortunately, converting __copy_from_user_inatomic() to
copy_from_user_nofault() caused a regression in Android. Now all the
writes from its applications trigger the fault that is rejected by
the _nofault() version that wasn't rejected by the _inatomic()
version. Instead of getting data, it now just gets a trace buffer
filled with:
tracing_mark_write: <faulted>
To fix this, on opening of the trace_marker file, allocate per CPU
buffers that can be used by the write call. Then when entering the
write call, do the following:
preempt_disable();
cpu = smp_processor_id();
buffer = per_cpu_ptr(cpu_buffers, cpu);
do {
cnt = nr_context_switches_cpu(cpu);
migrate_disable();
preempt_enable();
ret = copy_from_user(buffer, ptr, size);
preempt_disable();
migrate_enable();
} while (!ret && cnt != nr_context_switches_cpu(cpu));
if (!ret)
ring_buffer_write(buffer);
preempt_enable();
This works similarly to seqcount. As it must enabled preemption to do
a copy_from_user() into a per CPU buffer, if it gets preempted, the
buffer could be corrupted by another task.
To handle this, read the number of context switches of the current
CPU, disable migration, enable preemption, copy the data from user
space, then immediately disable preemption again. If the number of
context switches is the same, the buffer is still valid. Otherwise it
must be assumed that the buffer may have been corrupted and it needs
to try again.
Now the trace_marker write can get the user data even if it has to
fault it in, and still not grab any locks of its own.
* tag 'trace-v6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Have trace_marker use per-cpu data to read user space
ring buffer: Propagate __rb_map_vma return value to caller
tracing: Fix irqoff tracers on failure of acquiring calltime
tracing: Fix wakeup tracers on failure of acquiring calltime
tracing/osnoise: Replace kmalloc + copy_from_user with memdup_user_nul
Linux kernel
============
There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.
In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``. The formatted documentation can also be read online at:
https://www.kernel.org/doc/html/latest/
There are various text files in the Documentation/ subdirectory,
several of them using the reStructuredText markup notation.
Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.
5472d60c12