Add DEPRECATION NOTICE for AUTORELEASE to signal that any usage of this
should be dropped and fixed.
The macro is still defined for legacy reason but we at least dropped any
usage of it in both main and feeds.
Link: https://github.com/openwrt/openwrt/pull/20586
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
AUTORELEASE has been deprecated from a long time. Drop it and hardcode
the release following the current one present in the downloads
repository.
Link: https://github.com/openwrt/openwrt/pull/20586
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
AUTORELEASE has been deprecated from a long time. Drop it and hardcode
the release following the current one present in the downloads
repository.
Link: https://github.com/openwrt/openwrt/pull/20586
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
AUTORELEASE has been deprecated from a long time. Drop it and hardcode
the release following the current one present in the downloads
repository.
Link: https://github.com/openwrt/openwrt/pull/20586
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
AUTORELEASE has been deprecated from a long time. Drop it and hardcode
the release following the current one present in the downloads
repository.
Link: https://github.com/openwrt/openwrt/pull/20586
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
AUTORELEASE has been deprecated from a long time. Drop it and hardcode
the release following the current one present in the downloads
repository.
Link: https://github.com/openwrt/openwrt/pull/20586
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
AUTORELEASE has been deprecated from a long time. Drop it and hardcode
the release following the current one present in the downloads
repository.
Link: https://github.com/openwrt/openwrt/pull/20586
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Datasheet claims this register bit is supposed to be set by default,
however it was found in practice to not be, and OEM drivers would set
this bit at the same time.
Signed-off-by: Richard Huynh <voxlympha@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20465
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Fix typo in register for the serdes global config.
Fixes: ddb0cd276c ("kernel: rtl8261n: add support for Serdes TX swap")
Signed-off-by: Richard Huynh <voxlympha@gmail.com>
[ add commit description ]
Link: https://github.com/openwrt/openwrt/pull/20465
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Backport upstream minor fixed for NPU handling that might result in
kernel panic or handle leak.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add missing leds and network board files for EN7581 SoC.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
[ drop reference to downstream 10g RFB board ]
Link: https://github.com/openwrt/openwrt/pull/20556
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Similar to e92b153e99 ("mediatek: introduce KERNEL_LOADADDR to Device/Default template"),
let's move the default loadaddr to Device/Default.
What's more, use 0x80200000 instead of the SDK default value 0x80088000
to avoid the following error which may overwrite TZ memory and cause crash:
[ 0.000000] [Firmware Bug]: Kernel image misaligned at boot, please fix your bootloader!
[ 0.000000] OF: reserved mem: Reserved memory: failed to reserve memory for node 'atf@80000000': base 0x0000000080000000, size 2 MiB
Signed-off-by: Ziyang Huang <hzyitc@outlook.com>
[ fix spelling mistake ]
Link: https://github.com/openwrt/openwrt/pull/20470
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
This reverts commit 096739a93d.
The new fortify-headers version needs some more work to be usable in
OpenWrt. Revert this to fix the builds again.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This reverts commit 6268692bd2.
The new fortify-headers version needs some more work to be usable in
OpenWrt. Revert this to fix the builds again.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
This reverts commit 61f16a6960.
The new fortify-headers version needs some more work to be usable in
OpenWrt. Revert this to fix the builds again.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Enable USB node on eMMC RFB board and disable USB2 3.0 port to make the
3rd PCIe line correctly work.
This is needed to prevent the xHCI driver to mess with PCIe by
configuring the USB2 3.0 port. Port will still be detected but won't be
configureed by the driver and won't have PHY to configure for.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
The 3rd PCIe line use the USB2 serdes for PCIe operation. Correctly set
it to the DT node so that the mode can be correctly set in the PHY
driver.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add pending patch for USB support on AN7581 SoC. This is also required
to make operational the 3rd PCIe line that use the USB2 Serdes for PCIe
operations.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Fix regression from back when support for RTL930x was added.
While at it replace 0x8000 by BIT(15).
Fixes: 27029277f9
Tested-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Signed-off-by: Felix Baumann <felix.bau@gmx.de>
Link: https://github.com/openwrt/openwrt/pull/20549
Signed-off-by: Robert Marko <robimarko@gmail.com>
Remove SerDes initialization/configuration calls from the DSA driver in
'rtl93xx_phylink_mac_config' and let our PCS driver setup the SerDes now
that the driver is able to do that.
Adjust some details in rtl93xx_phylink_mac_config to ensure the MAC is
properly disabled MAC before configuring the SerDes. This was done
within the SerDes code before.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20539
Signed-off-by: Robert Marko <robimarko@gmail.com>
Use regmap to access registers in the global register space so we don't
have to use the old macros sw_r32/sw_w32 anymore.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20539
Signed-off-by: Robert Marko <robimarko@gmail.com>
Import SerDes configuration code from PHY driver into the PCS driver.
Only do mandatory adjustments, rename the function to adhere to the
naming scheme, adjust all SerDes access calls.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20539
Signed-off-by: Robert Marko <robimarko@gmail.com>
This fixes the sysupgrade image generation for the LBR20 as before
updating resulted in a brick which needed to be recovered using
nmrpflash.
UART log of a bricked unit:
Loading DNI firmware for checking...
Loading firmware 1 ...
NAND read: device 0 offset 0xa600000, size 0x20000
131072 bytes read: OK
NAND read: device 0 offset 0xa600000, size 0x380000
3670016 bytes read: OK
rootfs imge header corrupted !
Loading firmware 2 ...
NAND read: device 0 offset 0xa600000, size 0x20000
131072 bytes read: OK
NAND read: device 0 offset 0xa600000, size 0x380000
3670016 bytes read: OK
rootfs imge header corrupted !
Comparing the partition contents of a bricked and a working unit showed
that on the bricked one the fake uImage header was missing. The UBI
partition also showed significant changes. Both are fixed when the
base DniImage receipt is used.
Signed-off-by: Christoph Krapp <achterin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20558
Signed-off-by: Robert Marko <robimarko@gmail.com>
This aligns the LED behaviour with other Orbi devices. Orbi devices have
multiple RBG LEDs at the top of the device and two status LEDs at the
back next to the barrel jack.
The current behaviour of other Orbi devices is to use the multi-color
LEDs at the top for status indication and the green/red LEDs at the back
for running/panic-indication. This matches the vendor behaviour except
the color choice.
Other devices use green as running, blue on upgrade, red on failsafe and
white on bootup, so this aligns the LBR20 behaviour to the rest.
Signed-off-by: Christoph Krapp <achterin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20558
Signed-off-by: Robert Marko <robimarko@gmail.com>
This will remove the ethernet0 alias and TODO as setting the LAN MAC via
nvmem to gmac0 will set the correct mac to the switch.
Signed-off-by: Christoph Krapp <achterin@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20558
Signed-off-by: Robert Marko <robimarko@gmail.com>
Some SoC might use the Serdes for the second USB port as a 3rd PCIe
line (with the SSTR register correctly setup).
Add the node for the 3rd PCIe card and enable for the eMMC RFB board.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add compatibility with the new fortify-headers 2.3.3 by
disabling two warnings.
Fixes: 6268692bd2 ("toolchain: fortify-headers: Update to version 2.3.3")
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Link: https://github.com/openwrt/openwrt/pull/20552
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Fix some warnings and compile errors generated by the new
fortify-headers when compiling some applications like strace.
Fixes: 6268692bd2 ("toolchain: fortify-headers: Update to version 2.3.3")
Link: https://github.com/openwrt/openwrt/pull/20561
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
gpio-leds were not working on F@ST3864OP before was merged.
This pull request adds definitions for all LEDs, including the previously
non-working WAN LEDs.
Signed-off-by: Hang Zhou <929513338@qq.com>
Link: https://github.com/openwrt/openwrt/pull/20533
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
In Realtek implementation USXGMII is divided in submodes:
- USXGMII_SX: 10G single link, equivalent of PHY_INTERFACE_MODE_USXGMII
- USXGMII_DX: 10G two links (2*5G ?),
- USXGMII_QX: 10G four links, presumably 4*2.5G, used with the RTL8224,
equivalent of PHY_INTERFACE_MODE_10G_QXGMII.
This CL adds the 10_GQXGMII modes to the RTL930x implementation. In
particular the "mode set" function is extended to support both simple
mode set, and force mode set depending on the mode according to
dal_longan_sds_mode_set [1].
[1] https://github.com/ddejean/dms-1250-oss-release/blob/main/sdk/sdk_rtk_switch/rtk-sdk/src/dal/longan/dal_longan_sds.c#L1746
Signed-off-by: Damien Dejean <dam.dejean@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20472
Signed-off-by: Robert Marko <robimarko@gmail.com>
Add support for _FORTIFY_SOURCE level 3.
This is supported with glibc and with musl libc.
Link: https://github.com/openwrt/openwrt/pull/20313
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Update to recent fortify-headers version. This version also supports
_FORTIFY_SOURCE=3.
Changes: https://github.com/jvoisin/fortify-headers/compare/1.1...2.3.3
A patch similar to the removed one was applied upstream:
b40f6d8748
The root file system is getting a bit bigger.
Without this commit:
5250380 bin/targets/armsr/armv8/openwrt-armsr-armv8-generic-rootfs.tar.gz
4919997 bin/targets/malta/be/openwrt-malta-be-default-rootfs.tar.gz
With this commit:
5263407 bin/targets/armsr/armv8/openwrt-armsr-armv8-generic-rootfs.tar.gz
4930011 bin/targets/malta/be/openwrt-malta-be-default-rootfs.tar.gz
Link: https://github.com/openwrt/openwrt/pull/20313
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Fixes the following error by backporting upstream update:
```
scripts/dtc/pylibfdt/libfdt_wrap.c: In function ‘_wrap_fdt_next_node’:
scripts/dtc/pylibfdt/libfdt_wrap.c:5581:17: error: too few arguments to function ‘SWIG_Python_AppendOutput’
5581 | resultobj = SWIG_Python_AppendOutput(resultobj, val);
| ^~~~~~~~~~~~~~~~~~~~~~~~
```
This is the same fix as applied in 4e68103c4e ("uboot-rockchip: fix build with swig 4.3.0")
Link: https://github.com/openwrt/openwrt/pull/20538
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Fix the GPIO assignment of RX-LOS and TX-DISABLE for all SFP ports. Both
were actually swapped when adding support for the device. Apparently,
this didn't cause any issues.
Fixes: 62d50fb196
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20532
Signed-off-by: Robert Marko <robimarko@gmail.com>
The OnHub bootloader tries to patch the calibration directly into the
device tree, but it uses constant paths that look like this:
static const char *dt_path = "soc/pci@%8.8x/pcie@0/ath10k@0,0";
https://chromium.googlesource.com/chromiumos/platform/depthcharge/+/refs/heads/firmware-storm-6315.B/src/board/storm/wifi_calibration.c#69
These paths have changed in recent kernels, so we need to adapte.
The CONFIG_GOOGLE_VPD kernel module (provided by kmod-google-firmware)
is present on OnHub, and provides alternative means to locate this
information, in /sys/firmware/vpd/ro/wifi_base64_calibration{0,1,2}. Use
that instead.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/20477
Signed-off-by: Robert Marko <robimarko@gmail.com>
Backport a patch fixing a kernel panic on airoha_hw_init fail. This
should better handle scenario with NPU load Probe deferring.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Backport cleanup patch for Airoha Ethernet patch to permit easier
backport in the future.
Automatically refresh all affected patch.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add pending patch to make address some workaround needed to make the
Aeonsemi AS21xxx PHY working on the Airoha AN7581/AN7583 board.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi
Richard Huynh
Lorenzo Bianconi
Ziyang Huang
Hauke Mehrtens
Felix Baumann
Leon M. Busch-George
Jonas Jelonek
Christoph Krapp
Álvaro Fernández Rojas
Hannu Nyman
Hang Zhou
Damien Dejean
Zxl hhyccc
John Audia
Brian Norris