revamp automatic makefile generation for sub-projects

instead of making the "real" targets depend on the makefiles, add
conditional makefile generation to the targets themselves.
this causes makefile generation to follow the recursion order determined
by the project, which is important when dealing with prl and module pri
files.
a side effect of this is that qmake and make calls are interleaved now,
which is entirely different from a 'qmake -r' run.

on the downside, calling make with multiple targets which operate on the
same subprojects without prior makefile generation will make a mess, as
the qmake calls will be racing. this should be no problem, as qmake does
not generate recursive targets where this would be useful - at least by
default.

it is not sufficient to just order the creation of the makefiles
non-recursively (e.g., by using gnu-specific order-only-prerequisites),
as an interrupted and subsequently resumed build would happily skip the
nested makefiles.
workable alternative approaches would be walking the entire tree in a
pre-pass to ensure makefile presence (which is incredibly slow) or
creating additional stamp files only after recursing and having the
makefiles depend on them (which is ugly).

Task-number: QTBUG-23376
Reviewed-by: Joerg Bornemann <joerg.bornemann@nokia.com>
Change-Id: I88d3e7610215677d362026de316513d3bea04b06
This commit is contained in:
Oswald Buddenhagen 2012-05-18 22:13:51 +02:00
parent e6d97f3f77
commit 575a516630
4 changed files with 52 additions and 33 deletions

View File

@ -8,6 +8,7 @@ QMAKE_MOVE = mv -f
QMAKE_DEL_FILE = rm -f
QMAKE_DEL_DIR = rmdir
QMAKE_CHK_DIR_EXISTS = test -d
QMAKE_CHK_FILE_EXISTS = test -f
QMAKE_CHK_EXISTS_GLUE = "|| "
QMAKE_MKDIR = mkdir -p
QMAKE_STREAM_EDITOR = sed

View File

@ -6,5 +6,6 @@ QMAKE_MOVE = move
QMAKE_DEL_FILE = del
QMAKE_DEL_DIR = rmdir
QMAKE_CHK_DIR_EXISTS = if not exist
QMAKE_CHK_FILE_EXISTS = if not exist
QMAKE_CHK_EXISTS_GLUE =
QMAKE_MKDIR = mkdir

View File

@ -428,6 +428,9 @@ MakefileGenerator::init()
QHash<QString, QStringList> &v = project->variables();
chkdir = v["QMAKE_CHK_DIR_EXISTS"].join(" ");
chkfile = v["QMAKE_CHK_FILE_EXISTS"].join(" ");
if (chkfile.isEmpty()) // Backwards compat with Qt4 specs
chkfile = isWindowsShell() ? "if not exist" : "test -f";
chkglue = v["QMAKE_CHK_EXISTS_GLUE"].join(" ");
if (chkglue.isEmpty()) // Backwards compat with Qt4 specs
chkglue = isWindowsShell() ? "" : "|| ";
@ -2368,6 +2371,22 @@ void MakefileGenerator::writeSubMakeCall(QTextStream &t, const QString &callPref
<< callPostfix << endl;
}
void
MakefileGenerator::writeSubTargetCall(QTextStream &t,
const QString &in_directory, const QString &in, const QString &out_directory, const QString &out,
const QString &out_directory_cdin, const QString &makefilein, const QString &out_directory_cdout)
{
QString pfx;
if (!in.isEmpty()) {
if (!in_directory.isEmpty())
t << "\n\t" << mkdir_p_asstring(out_directory);
pfx = "( " + chkfile + " " + out + " " + chkglue
+ "$(QMAKE) " + in + buildArgs(in_directory) + " -o " + out
+ " ) && ";
}
writeSubMakeCall(t, out_directory_cdin + pfx, makefilein, out_directory_cdout);
}
void
MakefileGenerator::writeSubTargets(QTextStream &t, QList<MakefileGenerator::SubTarget*> targets, int flags)
{
@ -2426,10 +2445,6 @@ MakefileGenerator::writeSubTargets(QTextStream &t, QList<MakefileGenerator::SubT
if(!abs_source_path.isEmpty() && out_directory.startsWith(abs_source_path))
out_directory = Option::output_dir + out_directory.mid(abs_source_path.length());
QString mkfile = subtarget->makefile;
if(!in_directory.isEmpty())
mkfile.prepend(out_directory);
#define MAKE_CD_IN_AND_OUT(directory) \
if(!directory.isEmpty()) { \
if(project->isActiveConfig("cd_change_global")) { \
@ -2457,20 +2472,13 @@ MakefileGenerator::writeSubTargets(QTextStream &t, QList<MakefileGenerator::SubT
QString makefilein = " -f " + subtarget->makefile;
//qmake it
QString out;
QString in;
if(!subtarget->profile.isEmpty()) {
QString out = subtarget->makefile;
QString in = escapeFilePath(fileFixify(in_directory + subtarget->profile, FileFixifyAbsolute));
out = subtarget->makefile;
in = escapeFilePath(fileFixify(in_directory + subtarget->profile, FileFixifyAbsolute));
if(out.startsWith(in_directory))
out = out.mid(in_directory.length());
t << mkfile << ": " << "\n\t";
if(!in_directory.isEmpty()) {
t << mkdir_p_asstring(out_directory)
<< out_directory_cdin
<< "$(QMAKE) " << in << buildArgs(in_directory) << " -o " << out
<< out_directory_cdout << endl;
} else {
t << "$(QMAKE) " << in << buildArgs(in_directory) << " -o " << out << endl;
}
t << subtarget->target << "-qmake_all: ";
if (flags & SubTargetOrdered) {
if (target)
@ -2497,12 +2505,13 @@ MakefileGenerator::writeSubTargets(QTextStream &t, QList<MakefileGenerator::SubT
}
{ //actually compile
t << subtarget->target << ": " << mkfile;
t << subtarget->target << ":";
if(!subtarget->depends.isEmpty())
t << " " << valList(subtarget->depends);
if(project->isEmpty("QMAKE_NOFORCE"))
t << " FORCE";
writeSubMakeCall(t, out_directory_cdin, makefilein, out_directory_cdout);
writeSubTargetCall(t, in_directory, in, out_directory, out,
out_directory_cdin, makefilein, out_directory_cdout);
}
for(int suffix = 0; suffix < targetSuffixes.size(); ++suffix) {
@ -2515,20 +2524,22 @@ MakefileGenerator::writeSubTargets(QTextStream &t, QList<MakefileGenerator::SubT
s = QString();
if(flags & SubTargetOrdered) {
t << subtarget->target << "-" << targetSuffixes.at(suffix) << "-ordered: " << mkfile;
t << subtarget->target << "-" << targetSuffixes.at(suffix) << "-ordered:";
if(target)
t << " " << targets.at(target-1)->target << "-" << targetSuffixes.at(suffix) << "-ordered ";
if(project->isEmpty("QMAKE_NOFORCE"))
t << " FORCE";
writeSubMakeCall(t, out_directory_cdin, makefilein + " " + s, out_directory_cdout);
writeSubTargetCall(t, in_directory, in, out_directory, out,
out_directory_cdin, makefilein + " " + s, out_directory_cdout);
}
t << subtarget->target << "-" << targetSuffixes.at(suffix) << ": " << mkfile;
t << subtarget->target << "-" << targetSuffixes.at(suffix) << ":";
if(!subtarget->depends.isEmpty())
t << " " << valGlue(subtarget->depends, QString(), "-" + targetSuffixes.at(suffix) + " ",
"-"+targetSuffixes.at(suffix));
if(project->isEmpty("QMAKE_NOFORCE"))
t << " FORCE";
writeSubMakeCall(t, out_directory_cdin, makefilein + " " + s, out_directory_cdout);
writeSubTargetCall(t, in_directory, in, out_directory, out,
out_directory_cdin, makefilein + " " + s, out_directory_cdout);
}
}
t << endl;
@ -2627,28 +2638,31 @@ MakefileGenerator::writeSubTargets(QTextStream &t, QList<MakefileGenerator::SubT
if(!recurse.contains(subtarget->name))
continue;
QString mkfile = subtarget->makefile;
if(!in_directory.isEmpty()) {
if(!out_directory.endsWith(Option::dir_sep))
mkfile.prepend(out_directory + Option::dir_sep);
else
mkfile.prepend(out_directory);
}
QString out_directory_cdin, out_directory_cdout;
MAKE_CD_IN_AND_OUT(out_directory);
QString makefilein = " -f " + subtarget->makefile;
QString out;
QString in;
if (!subtarget->profile.isEmpty()) {
out = subtarget->makefile;
in = escapeFilePath(fileFixify(in_directory + subtarget->profile, FileFixifyAbsolute));
if (out.startsWith(in_directory))
out = out.mid(in_directory.length());
}
//write the rule/depends
if(flags & SubTargetOrdered) {
const QString dep = subtarget->target + "-" + (*qut_it) + "_ordered";
t << dep << ": " << mkfile;
t << dep << ":";
if(target)
t << " " << targets.at(target-1)->target << "-" << (*qut_it) << "_ordered ";
deps += " " + dep;
} else {
const QString dep = subtarget->target + "-" + (*qut_it);
t << dep << ": " << mkfile;
t << dep << ":";
if(!subtarget->depends.isEmpty())
t << " " << valGlue(subtarget->depends, QString(), "-" + (*qut_it) + " ", "-" + (*qut_it));
deps += " " + dep;
@ -2659,8 +2673,8 @@ MakefileGenerator::writeSubTargets(QTextStream &t, QList<MakefileGenerator::SubT
sub_targ = project->first((*qut_it) + ".recurse_target");
//write the commands
writeSubMakeCall(t, out_directory_cdin, makefilein + " " + sub_targ,
out_directory_cdout);
writeSubTargetCall(t, in_directory, in, out_directory, out,
out_directory_cdin, makefilein + " " + sub_targ, out_directory_cdout);
}
}
if(project->isEmpty("QMAKE_NOFORCE") &&

View File

@ -81,7 +81,7 @@ class MakefileGenerator : protected QMakeSourceFileInfo
QString spec;
bool init_opath_already, init_already, no_io;
QHash<QString, bool> init_compiler_already;
QString chkdir, chkglue;
QString chkdir, chkfile, chkglue;
QString build_args(const QString &outdir=QString());
void checkMultipleDefinition(const QString &, const QString &);
@ -128,6 +128,9 @@ protected:
SubTargetsNoFlags=0x00
};
QList<MakefileGenerator::SubTarget*> findSubDirsSubTargets() const;
void writeSubTargetCall(QTextStream &t,
const QString &in_directory, const QString &in, const QString &out_directory, const QString &out,
const QString &out_directory_cdin, const QString &makefilein, const QString &out_directory_cdout);
virtual void writeSubMakeCall(QTextStream &t, const QString &outDirectory_cdin,
const QString &makeFileIn, const QString &outDirectory_cdout);
void writeSubTargets(QTextStream &t, QList<SubTarget*> subtargets, int flags);