qiurui
/
rv1126-uboot
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

arm: socfpga: misc: Add proper ethernet initialization 

Add function to initialize the EMAC blocks upon board startup.
The preprocessor guards against building on SoCFPGA-VT and against
SPL build are not needed as those are handled implicitly via both
SPL framework and the socfpga_cyclone5.h config file, which will
not define CONFIG_DESIGNWARE_ETH if building for SoCFPGA-VT.

We cannot handle two EMAC ethernet blocks yet, therefore the ifdefs.
Once there is hardware using both EMAC blocks, this ifdef will have
to go.

Signed-off-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <clsee@altera.com>
Cc: Dinh Nguyen <dinguyen@altera.com>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Tom Rini <trini@ti.com>
Cc: Wolfgang Denk <wd@denx.de>
Cc: Pavel Machek <pavel@denx.de>
This commit is contained in:
Pavel Machek 2014-09-08 14:08:45 +02:00 committed by Marek Vasut
parent e9d6a20034
commit 45d6e67710
2 changed files with 52 additions and 15 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

58
arch/arm/cpu/armv7/socfpga/misc.c
View File

@ -9,15 +9,58 @@
#include <miiphy.h> #include <miiphy.h>
#include <netdev.h> #include <netdev.h>
#include <asm/arch/reset_manager.h> #include <asm/arch/reset_manager.h>
#include <asm/arch/system_manager.h>
DECLARE_GLOBAL_DATA_PTR; DECLARE_GLOBAL_DATA_PTR;
static struct socfpga_system_manager *sysmgr_regs =
(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
int dram_init(void) int dram_init(void)
{ {
gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE); gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
return 0; return 0;
} }
/*
* DesignWare Ethernet initialization
*/
#ifdef CONFIG_DESIGNWARE_ETH
int cpu_eth_init(bd_t *bis)
{
#if CONFIG_EMAC_BASE == SOCFPGA_EMAC0_ADDRESS
const int physhift = SYSMGR_EMACGRP_CTRL_PHYSEL0_LSB;
#elif CONFIG_EMAC_BASE == SOCFPGA_EMAC1_ADDRESS
const int physhift = SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB;
#else
#error "Incorrect CONFIG_EMAC_BASE value!"
#endif
/* Initialize EMAC. This needs to be done at least once per boot. */
/*
* Putting the EMAC controller to reset when configuring the PHY
* interface select at System Manager
*/
socfpga_emac_reset(1);
/* Clearing emac0 PHY interface select to 0 */
clrbits_le32(&sysmgr_regs->emacgrp_ctrl,
SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << physhift);
/* configure to PHY interface select choosed */
setbits_le32(&sysmgr_regs->emacgrp_ctrl,
SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII << physhift);
/* Release the EMAC controller from reset */
socfpga_emac_reset(0);
/* initialize and register the emac */
return designware_initialize(CONFIG_EMAC_BASE,
CONFIG_PHY_INTERFACE_MODE);
}
#endif
#if defined(CONFIG_DISPLAY_CPUINFO) #if defined(CONFIG_DISPLAY_CPUINFO)
/* /*
* Print CPU information * Print CPU information
@ -54,18 +97,3 @@ int misc_init_r(void)
{ {
return 0; return 0;
} }
/*
* DesignWare Ethernet initialization
*/
int cpu_eth_init(bd_t *bis)
{
#if !defined(CONFIG_SOCFPGA_VIRTUAL_TARGET) && !defined(CONFIG_SPL_BUILD)
/* initialize and register the emac */
return designware_initialize(CONFIG_EMAC_BASE,
CONFIG_PHY_INTERFACE_MODE);
#else
return 0;
#endif
}

9
arch/arm/include/asm/arch-socfpga/system_manager.h
View File

@ -134,4 +134,13 @@ struct socfpga_system_manager {
#define SYSMGR_SDMMC_CTRL_SET(smplsel, drvsel) \ #define SYSMGR_SDMMC_CTRL_SET(smplsel, drvsel) \
((((drvsel) << 0) & 0x7) | (((smplsel) << 3) & 0x38)) ((((drvsel) << 0) & 0x7) | (((smplsel) << 3) & 0x38))
/* EMAC Group Bit definitions */
#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_GMII_MII 0x0
#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII 0x1
#define SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RMII 0x2
#define SYSMGR_EMACGRP_CTRL_PHYSEL0_LSB 0
#define SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB 2
#define SYSMGR_EMACGRP_CTRL_PHYSEL_MASK 0x3
#endif /* _SYSTEM_MANAGER_H_ */ #endif /* _SYSTEM_MANAGER_H_ */