configs: rk3568: Enable spi flash and raw nand

Change-Id: Id69e4bdc3685a40826f2f13cb90cccc9cd960808
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>

configs/rk3568_defconfig

@@ -12,6 +12,9 @@ CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
 CONFIG_TARGET_EVB_RK3568=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
+CONFIG_SPL_NAND_SUPPORT=y
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_DEFAULT_DEVICE_TREE="rk3568-evb"
 CONFIG_SMBIOS_PRODUCT_NAME=""
 CONFIG_DEBUG_UART=y
@@ -30,6 +33,7 @@ CONFIG_SPL_SEPARATE_BSS=y
 CONFIG_SPL_SHA256_SUPPORT=y
 CONFIG_SPL_CRYPTO_SUPPORT=y
 CONFIG_SPL_HASH_SUPPORT=y
+CONFIG_SPL_MTD_SUPPORT=y
 CONFIG_SPL_ATF=y
 CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
 CONFIG_FASTBOOT_BUF_ADDR=0x800800
@@ -53,12 +57,14 @@ CONFIG_CMD_GPT=y
 CONFIG_CMD_BOOT_ANDROID=y
 CONFIG_CMD_BOOT_ROCKCHIP=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_NAND=y
 CONFIG_CMD_USB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
 # CONFIG_CMD_ITEST is not set
 # CONFIG_CMD_SETEXPR is not set
 # CONFIG_CMD_MISC is not set
 # CONFIG_CMD_CHARGE_DISPLAY is not set
+CONFIG_CMD_MTD_BLK=y
 # CONFIG_SPL_DOS_PARTITION is not set
 # CONFIG_ISO_PARTITION is not set
 CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64
@@ -82,6 +88,15 @@ CONFIG_MMC_DW_ROCKCHIP=y
 CONFIG_MMC_SDHCI=y
 CONFIG_MMC_SDHCI_SDMA=y
 CONFIG_MMC_SDHCI_ROCKCHIP=y
+CONFIG_MTD=y
+CONFIG_MTD_BLK=y
+CONFIG_MTD_DEVICE=y
+CONFIG_NAND=y
+CONFIG_NAND_ROCKCHIP=y
+CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y
+CONFIG_SYS_NAND_U_BOOT_OFFS=0x8000
+CONFIG_SYS_NAND_U_BOOT_OFFS_REDUND=0x10000
+CONFIG_MTD_SPI_NAND=y
 CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_PHYLIB=y
 CONFIG_PHY=y
@@ -106,6 +121,7 @@ CONFIG_BAUDRATE=1500000
 CONFIG_DEBUG_UART_BASE=0xFE660000
 CONFIG_DEBUG_UART_CLOCK=24000000
 CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_ROCKCHIP_SFC=y
 CONFIG_SYSRESET=y
 CONFIG_USB=y
 CONFIG_USB_XHCI_HCD=y