Change-Id: I66c533e5c556c26b771037bc7eee5ceff01f5cb9
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit 95d3877a5818cc3f149a9d443637ff145bbaaabb)
This converts the following to Kconfig:
CONFIG_SF_DEFAULT_BUS
CONFIG_SF_DEFAULT_CS
CONFIG_SF_DEFAULT_MODE
CONFIG_SF_DEFAULT_SPEED
I use moveconfig script and then manual check on generated u-boot.cfg
to solve the remaining issue.
Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>
Change-Id: I6aaaaf572649fd16925af9eb457ea19423372e60
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit 14453fbfadc2f98ca35d6033140466c7a4b4947a)
NAND flavors, like serial and parallel, have a lot in common and would
benefit to share code. Let's move raw (parallel) NAND specific code in a
raw/ subdirectory, to ease the addition of a core file in nand/ and the
introduction of a spi/ subdirectory specific to SPI NANDs.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Change-Id: Ibb56f85620c4798fb579be3e4e30438963b7c48b
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit a430fa06a4ac50e785fdbfb7f43c3cb14b35619c)
This converts the following to Kconfig:
CONFIG_MTD_PARTITIONS
CONFIG_MTD_DEVICE
Signed-off-by: Adam Ford <aford173@gmail.com>
Change-Id: I90c45c7716965009c00d18a19f5491f19b1ab8b3
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit 9c5b00973bceb7c0192bd6b03672d69b092700b4)
Add the config option `CONFIG_SPL_NAND_IDENT` for using the NAND chip ID list
to identify the NAND flash in SPL.
Change-Id: I4d83cb678cb52e83ddf755c0188a4f2f42fe5671
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit 15e207faa0c32b587c173844936cadd7bf8dee01)
Change-Id: I0ba60a6d86cd7f4777f91027fc9da3f4db855114
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit c0ce4ceaba03fa6ddf738628344025c44fc78dd4)
Freescale (NXP) boards have lots of defconfig files per board.
I used "imply PANIC_HANG" for them.
Change-Id: I56347810ee33ccd8bb3553b0ee95b858e827ce9b
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
(cherry picked from commit 7e3caa81e0e9cc5e2beed4a3a1c334e2119f4498)
The MAC addresses get fixed in the device tree for "ethernet" nodes
is by using trailing number behind "ethernet" found in "/aliases".
It may not be necessary for the "ethernet" nodes to be sequential.
There can be gaps in between or any node disabled
So provide a support to fetch MAC addr sequentially from env
and apply them to "ethernet" nodes in the order they appear in
device tree only if "ethernet" is not "disabled"
Change-Id: I1bd6544a2bfe5cd5d6708e249c1e07d44d6944d2
Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
Reviewed-by: York Sun <york.sun@nxp.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
(cherry picked from commit 24acb83d8f04e9a49f161c07d38da50c70e9f16d)
The old CodingStyle document has been converted to ReST and moved
elsewhere. Link to the web version of this document instead.
Change-Id: I92f10f6c014a2658f587350f847634683d3d51c7
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
(cherry picked from commit 659208da4703de50826a469cbb38bf6afb938978)
Old url currently returns 403; modify to url that actually works
with current state of the list server
Change-Id: If1d5c756a496c89de98d6685c6b3a37141d17044
Signed-off-by: S. Lockwood-Childs <sjl@vctlabs.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
(cherry picked from commit 1dade18e40acc41e2b98b46ce1cb4f198cd40af9)
Add support for bootcounter on an EXT filesystem.
Sync configuration whitelist.
Change-Id: Iad44e2526afa9b1c117bde7527774e414fa54d8c
Signed-off-by: Ian Ray <ian.ray@ge.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
(cherry picked from commit f31dac4e6e71c7c818151cd917d872909119fb99)
Last user of this option went away in commit:
fdc7718999 ("board: usb_a9263: Update to support DT and DM")
Change-Id: Id05869deccb88c1102700dd5af58a8c249e3e9e2
Signed-off-by: Tuomas Tynkkynen <tuomas.tynkkynen@iki.fi>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
(cherry picked from commit c68c03f52badc90951dbf8a054c0e500e04bf365)
The new "boot_android" command simply executes the Android Bootloader
flow. This receives the location (interface, dev, partition) of the
Android "misc" partition which is then used to lookup and infer the
kernel and system images that should be booted.
Bug: 32707546
Test: Booted a rpi3 build with Android Things.
Signed-off-by: Alex Deymo <deymo@google.com>
Change-Id: Ibf3f31e38b159d42db7a0835b99ad7ec260fc2a7
An Android Bootloader must comply with certain boot modes and change
the kernel command line accordingly. This patch introduces the Android
boot mode concept which determines whether the device should boot to
one of the following:
* recovery: which should boot to the recovery image,
* bootloader: which should boot to the "bootloader" (fastboot) and
* normal: which should boot to the system image.
The boot mode is determined in part by the Boot Control Block (BCB)
which is stored at the beginning of the "misc" partition. The BCB
is defined in the "bootloader_message.h" file in AOSP, now copied
here as android_bootloader_message.h with minor modifications.
This patch implements the basic boot flow that loads and boots an
Android kernel image assuming an A/B device which implies that it uses
boot as recovery (BOARD_USES_RECOVERY_AS_BOOT in the BoardConfig.mk).
This means that the recovery image shares the same kernel with the
normal boot system image, but stores the recovery image as a ramdisk
which is not used in normal mode.
Among the limitations, this patch doesn't implement the A/B slot
selection, it only boots from the slot "a".
Bug: 31887729
Test: Booted a rpi3 with this flow.
Signed-off-by: Alex Deymo <deymo@google.com>
Change-Id: Ia2932c6f398f1ae713f0cd9670828f84103dca38
update setenv/getenv to env_set/env_get.
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
The correct name is 'gd->fdt_blob', not 'gd->blob'.
Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
CC: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
This converts the following to Kconfig:
CONFIG_SPL_OMAP3_ID_NAND
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
- Move ANDROID_IMAGE_SUPPORT to top level Kconfig under images as it's
not strictly part of fastboot.
- Add some defaults for the fastboot buffer location and size
- Migrate all options listed in cmd/fastboot/Kconfig
- Cleanup the README
Signed-off-by: Tom Rini <trini@konsulko.com>
CONFIG_SYS_GENERIC_GLOBAL_DATA is no longer used by any board or
platform, so support for it can be dropped.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
We are now using an env_ prefix for environment functions. Rename these
two functions for consistency. Also add function comments in common.h.
Quite a few places use getenv() in a condition context, provoking a
warning from checkpatch. These are fixed up in this patch also.
Suggested-by: Wolfgang Denk <wd@denx.de>
Signed-off-by: Simon Glass <sjg@chromium.org>
Also introduce CONFIG_USE_BOOTARGS option so we can control if
CONFIG_BOOTARGS defined at all.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
[trini: Resync r8a779[56]_ulcb, various ls10xx targets]
Signed-off-by: Tom Rini <trini@konsulko.com>
Most of this is duplicated in Kconfig help. Add some of that which is not,
and remove the help from the README.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
This file does not include all commands and has not for a while. Let's
drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
This converts the following to Kconfig:
CONFIG_CMD_UUID
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
This converts the following to Kconfig:
CONFIG_CMD_SF_TEST
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
This converts the following to Kconfig:
CONFIG_CMD_SDRAM
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
This converts the following to Kconfig:
CONFIG_CMD_SAVES
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
This is no-longer used. Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
This patch converts CONFIG_CMD_REGINFO to Kconfig
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Convert this option and enable it in sandbox. Also correct a bug which
was introduced with the block-device driver model conversion.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
This command is not used by any board. It also looks quite similar to the
'iod' and 'iow' commands which use the correct I/O macros.
Drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
This converts the following to Kconfig:
CONFIG_CMD_PCMCIA
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
This converts the following to Kconfig:
CONFIG_CMD_PCI
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
It does not seem worth having an option to enable another sub-command in
this legacy driver. Drop this option so that the sub-command is always
available.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
This converts the following to Kconfig:
CONFIG_CMD_PCA953X
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
This converts the following to Kconfig:
CONFIG_CMD_MMC_SPI
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
This is not actually used in U-Boot. Most likely it means
CONFIG_CMD_MEMORY so change all occurences to that.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Migrate all remaining instances of CMD_NAND, CMD_NAND_TRIMFFS
CMD_NAND_LOCK_UNLOCK and CMD_NAND_TORTURE from the headers into the
defconfig files.
Tested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
The CONFIG_ENV_IS_IN_... options which have already been converted to
Kconfig only have a small amount of help. Move the rest of it over from
the README.
Signed-off-by: Simon Glass <sjg@chromium.org>
The above CONFIG options are in Kconfig, and now have correct depends and
inter-dependencies. Migrate these to configs/ from include/configs/. In the
case of CMD_UBIFS also change it to be a default y if CMD_UBI.
Signed-off-by: Tom Rini <trini@konsulko.com>
This driver is for a PowerPC board that will likely be removed soon.
Rather than converting it to driver model, drop it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Tuomas Tynkkynen
Jon Lin
Miquel Raynal
Adam Ford
Jörg Krause
Petr Vorel
Masahiro Yamada
Prabhakar Kushwaha
Baruch Siach
S. Lockwood-Childs
Ian Ray
Tuomas Tynkkynen
Alex Deymo
Nobuhiro Iwamatsu
Tom Rini
Thomas Petazzoni
Simon Glass
Sam Protsenko
Christophe Leroy