If some child info->prefix are the same, try to
distinguish them by parent addr.
Example:
pmic@20, pmic@1a...
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: I504cd887e232bb309d8e1790f6d55910172d08b5
Assume that no battery node means the board is always supplied with
adapter, so set 2000mA input curren to make board have enough power.
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: I9d66c02682cc3ff66a2d8e365837fc66bf991933
The irq framework takes over the enable/disable management
for virq chip.
Change-Id: I63202b22b121b4a889d5a408a6a5a8f50a3c24d8
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
So that the child drivers can request their irq through the
generic interrupt framework.
Include: RK805/808/816/817/818.
Change-Id: I5556f2e926e850ac6717a05166eab5e19566d531
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
The on/off_source value has been changed,
so we can't get the correct on/off source.
Change-Id: I7c522574f5e8d3bbc3c5d73980cdccdb4717da52
Signed-off-by: Shengfei Xu <xsf@rock-chips.com>
The under-voltage protection will shutdown the LDO3 and reset the PMIC.
Change-Id: Ic84c7ad1a2eed8c1f983e761988ffb903fc878af
Signed-off-by: Shengfei Xu <xsf@rock-chips.com>
support rtc alarm interrupt and alarm trigger power up.
Change-Id: I7752f173d524f579b57b862d2788296ab1486c14
Signed-off-by: Elaine Zhang <zhangqing@rock-chips.com>
rk817/rk809 must restore the PMIC_POWER_EN OTP value before the system reboot.
Change-Id: Ia62cb8f5b0dc9fef8a32a3af5f087c55a9888d78
Signed-off-by: Shengfei Xu <xsf@rock-chips.com>
Thomas reported U-Boot failed to build host tools if libfdt-devel
package is installed because tools include libfdt headers from
/usr/include/ instead of using internal ones.
This commit moves the header code:
include/libfdt.h -> include/linux/libfdt.h
include/libfdt_env.h -> include/linux/libfdt_env.h
and replaces include directives:
#include <libfdt.h> -> #include <linux/libfdt.h>
#include <libfdt_env.h> -> #include <linux/libfdt_env.h>
Change-Id: I6c0f7e50e8b571106627f25ddac008a62bd2994e
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
this is more flexsible to match regulator type.
Change-Id: I5589b5d1d32d8ac1c6d09d64e680eddd31f2ba90
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
It tells the reason why PMIC current powers on an last powers off,
this helps a lot for debugging when system suddenly power off or
restart due to unknown power supply cause.
Change-Id: Iec0c38dc1ac5745a9bc473848b5d617059b16faf
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
1. adjust error message easy to be understood;
2. show RK808 chip id as "RK808";
3. check PMIC chip id read failed;
Change-Id: Ifc4c25ccc8cac4fdd91bcf6515b1dd6aa1bf71fa
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
1. set pmic_sleep as sleep function;
2. set pmic_int active low.
Change-Id: I4bc4034e18b19dc9b1b328870db652d11173fe3a
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
This patch extends pmic_bind_children prefix matching. In addition to
the node name the property regulator-name is used while trying to match
prefixes. This allows assigning different drivers to regulator nodes
named regulator@1 and regulator@10 for example.
I have discarded the idea of using other properties then regulator-name
as I do not see any benefit in using property compatible or even
regulator-compatible. Of course I am open to change this if there are
good reasons to do so.
Change-Id: Ifedf2c0a51cb725ddb290ee9dfd54a3fea45df70
Signed-off-by: Felix Brack <fb@ltec.ch>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
(cherry picked from commit bf802f5d544f85c03b4097ab23d078be43c61855)
U-Boot widely uses error() as a bit noisier variant of printf().
This macro causes name conflict with the following line in
include/linux/compiler-gcc.h:
# define __compiletime_error(message) __attribute__((error(message)))
This prevents us from using __compiletime_error(), and makes it
difficult to fully sync BUILD_BUG macros with Linux. (Notice
Linux's BUILD_BUG_ON_MSG is implemented by using compiletime_assert().)
Let's convert error() into now treewide-available pr_err().
Done with the help of Coccinelle, excluing tools/ directory.
The semantic patch I used is as follows:
// <smpl>
@@@@
-error
+pr_err
(...)
// </smpl>
Change-Id: I921807c1770d36a91e692c48ab477558bb2ed0b8
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
[trini: Re-run Coccinelle]
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
(cherry picked from commit 9b643e312d528f291966c1f30b0d90bf3b1d43dc)
Remove header file includes that have been left over after the
conversion to livetree-support.
Change-Id: Iac1e65de175fa5dd747e161e426fc10309748e42
Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
(cherry picked from commit a904a16bc172ee1d7bcbcae1afcec21efe305e47)
Add a convenience macro to iterate over subnodes of a node. Make use of
this where appropriate in the code.
Change-Id: Iae0fb554472d0b5819d26becbbcf8909ff891514
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
(cherry picked from commit 3991f42ed2e38aff28ba3c24369bfbd90620bea7)
Convert this PMIC driver to driver model and fix up other users. The
regulator and GPIO functions are now handled by separate drivers.
Update nyan-big to work correct. Three boards will need to be updated by
the maintainers: apalis-tk1, cei-tk1-som. Also the TODO in the code re
as3722_sd_set_voltage() needs to be completed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Jetson-TK1
Tested-by: Stephen Warren <swarren@nvidia.com>
This pmic includes GPIOs which should have their own driver. Add
a driver to support these.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Tested-on: Beaver, Jetson-TK1
Tested-by: Stephen Warren <swarren@nvidia.com>
Add support to bind the regulators/child nodes with the pmic.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Some boards like am437x-gp-evm require dcdc3 also to be configured
as it feeds on to ddr. Hence add the capability as well.
Signed-off-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
The rk8xx_priv structure need to allocate for driver, or else
it will cause data abort when CPU access it.
This is a bug fix for below patch set:
https://www.mail-archive.com/u-boot@lists.denx.de/msg247345.html
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
Acked-by: Simon Glass <sjg@chromium.org>
This PMIC driver (power and GPIO) is used by the sandbox SPMI tests.
Update the drivers to support a live device tree so that the tests pass.
Signed-off-by: Simon Glass <sjg@chromium.org>
These support the flat device tree. We want to use the dev_read_..()
prefix for functions that support both flat tree and live tree. So rename
the existing functions to avoid confusion.
In the end we will have:
1. dev_read_addr...() - works on devices, supports flat/live tree
2. devfdt_get_addr...() - current functions, flat tree only
3. of_get_address() etc. - new functions, live tree only
All drivers will be written to use 1. That function will in turn call
either 2 or 3 depending on whether the flat or live tree is in use.
Note this involves changing some dead code - the imx_lpi2c.c file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Currently while setting the vsel value for dcdc1 and dcdc2
the driver is wrongly masking the entire 8 bits in the process
clearing PFM (bit7) field as well. Hence describe an appropriate
mask for vsel field and modify only those bits in the vsel
mask.
Source: http://www.ti.com/lit/ds/symlink/tps65218.pdf
Signed-off-by: Keerthy <j-keerthy@ti.com>
Fixes: 86db550b38 ("power: Add support for the TPS65218 PMIC")
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Since this driver can be used for rk8xx series pmic,
let's rename rk808 to rk8xx, to make it clear.
Configs parts are done by sed -i "s/RK808/RK8XX/g" `grep RK808 -lr ./`
Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
The RK818 chip is a Power Management IC (PMIC) for multimedia and handheld
devices.
For boards use rk818, the input current should be set in the early stage, before
ddr initialization.
Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com>
Add the max8997 controller for Driver model.
Exynos4210 is using max8997 pmic controller.
(pmic_max8997.c should be deprecated.)
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
At present devices use a simple integer offset to record the device tree
node associated with the device. In preparation for supporting a live
device tree, which uses a node pointer instead, refactor existing code to
access this field through an inline function.
Signed-off-by: Simon Glass <sjg@chromium.org>
Shunqing Chen
Joseph Chen
Shengfei Xu
Elaine Zhang
Masahiro Yamada
Sugar Zhang
Felix Brack
Philipp Tomsich
Simon Glass
Keerthy
Kever Yang
Jacob Chen
Jaehoon Chung
Tom Rini