Add support for USB3 host and gadget driver. This is a direct sync of
Linux kernel Cadence USB stack that from v5.4-rc1 release.
Driver has been modified so that it compiles without errors against
U-Boot code base.
Features not required for U-Boot such as scatter-gather DMA and OTG
interrupt handling has been dropped.
Change-Id: I168e032f35d259ad1bb7a7f9f3c066bd13f129d4
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
[jjhiblot@ti.com: Add PHY support]
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
(cherry picked from commit 7e91f6ccdc84fe5952e5c26769e65d12e5fc4733)
Move CONFIG_USB_EHCI_VF to drivers/usb/host/Kconfig and update the one
and only user thereof being colibri_vf.
Change-Id: I69228893cb776f077e68a80ee236aeed6e7c2d26
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Igor Opaniuk <igor.opaniuk@toradex.com>
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
(cherry picked from commit 20df4b570d164675da17bf23998e51271f5a79a3)
Now Allwinner platform is all set to use Generic USB
controller drivers, so remove the legacy sunxi drivers.
Conflicts:
drivers/usb/host/ehci-sunxi.c
drivers/usb/host/ohci-sunxi.c
scripts/config_whitelist.txt
Change-Id: I68dec1660d92dce8833d5a05584694d7b7c4ab36
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
(cherry picked from commit 543049ab590620a91b37fa0296edd3bcddd0eba2)
The SPL option for USB gadget should be named after the option for u-boot
(CONFIG_USB_GADGET)
Conflicts:
arch/arm/mach-imx/mx6/Kconfig
arch/arm/mach-imx/spl.c
configs/am335x_boneblack_vboot_defconfig
configs/am335x_evm_usbspl_defconfig
configs/am43xx_evm_defconfig
configs/am43xx_hs_evm_defconfig
configs/imx6q_logic_defconfig
configs/mx6memcal_defconfig
configs/mx6sabresd_defconfig
configs/pico-hobbit-imx6ul_defconfig
configs/pico-hobbit-imx7d_defconfig
configs/pico-imx6ul_defconfig
configs/pico-imx7d_defconfig
configs/pico-pi-imx6ul_defconfig
configs/pico-pi-imx7d_defconfig
drivers/Makefile
Change-Id: I51305422f13cb7d743274f82c531000c0f93c144
Signed-off-by: Jean-Jacques Hiblot <jjhiblot@ti.com>
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
(cherry picked from commit f811e9763f4b6f6f5e3fe9c2fa30d2b6c62d289e)
Switch to DM_USB was done and there is no need to keep !DM_USB code in
tree.
Change-Id: Ib39e8431dbad9fa330d70235bb48bfb03d942f1b
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
(cherry picked from commit d067624c47bf15b9b5b716ae8be510fa1fb615a2)
The usb_ether gadget duplicates the USB settings for the manufacturer,
product ID and vendor ID.
Make sure we use the common option so that we can expect a single VID/PID
couple for a single device.
Change-Id: I71cabacc3dcf5a7335996b2ddaf812e1c97b097b
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
(cherry picked from commit 10ac57fda3ff46a20af7ded6cc03d78e88032495)
We need to select an interface for the usb_ether gadget, and they haven't
been converted to Kconfig yet. Add a choice to make sure we have an option
selected, and convert all the users.
Change-Id: Idd2f234e7538672e2002d14eb2b11893f2751a66
Reviewed-by: Łukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
(cherry picked from commit d2f0f4af4b655de9c63976be659288c88ae23953)
The USB Ethernet gadget option has not yet been moved to Kconfig, let's
deal with that.
Change-Id: Ie970ea4a67b81012f1c6382b38a04fac00c6ee75
Reviewed-by: Łukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
(cherry picked from commit 3f33d3c8f4cc1b19a4a74e185bd3b6910f30e00f)
While the USB Ethernet device address is already defined in Kconfig, the
host address isn't. Convert it.
Change-Id: I527f287a8714bd460a2261a9b4ba6be71e8ee436
Reviewed-by: Łukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
(cherry picked from commit c163668a4abaeef3eaab22b4a5ac13d2d74f1306)
Traceback (most recent call last):
File "./scripts/mkbootimg", line 234, in <module>
main()
File "./scripts/mkbootimg", line 224, in main
args = parse_cmdline()
File "./scripts/mkbootimg", line 210, in parse_cmdline
return parser.parse_args()
File "/usr/lib/python2.7/argparse.py", line 1690, in parse_args
args, argv = self.parse_known_args(args, namespace)
File "/usr/lib/python2.7/argparse.py", line 1722, in parse_known_args
namespace, args = self._parse_known_args(args, namespace)
File "/usr/lib/python2.7/argparse.py", line 1928, in _parse_known_args
start_index = consume_optional(start_index)
File "/usr/lib/python2.7/argparse.py", line 1868, in consume_optional
take_action(action, args, option_string)
File "/usr/lib/python2.7/argparse.py", line 1780, in take_action
argument_values = self._get_values(action, argument_strings)
File "/usr/lib/python2.7/argparse.py", line 2220, in _get_values
value = self._get_value(action, arg_string)
File "/usr/lib/python2.7/argparse.py", line 2249, in _get_value
result = type_func(arg_string)
File "./scripts/mkbootimg", line 172, in parse_os_patch_level
assert m > 0 and m <= 12
AssertionError
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Change-Id: I625717d27b9e807c4a2afee6b38eca9750ee4e41
This converts the following to Kconfig:
CONFIG_SPI
This partly involves updating code that assumes that CONFIG_SPI implies
things that are specific to the MPC8xx SPI driver. For now, just update
the CONFIG tests. This also involves reworking the default for
CONFIG_SYS_DEF_EEPROM_ADDR so that we don't set it when we cannot make a
reasonable default, as it does not cause any compile failures.
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
(cherry picked from commit f1b1f77060beadbfe9f42a3be00019bd025afbd6)
Change-Id: Ie9f15ada869105eb407f41d4df7eecbaa916b940
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
As we aren't quite able to convert some platforms with a very small size
limit in SPL yet, we need to revert this for now.
This reverts commit 7b0947787358c6b277431d6b76ce043d8bec641d.
Change-Id: I9953c2529a611950db1de168d772607329f827b7
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit e80fa2c2c0870f7c17e233ecc07552e1082c1513)
All board configs are now enabled DM_SPI for SPL and
U-Boot proper, so now its time to drop non-dm code.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Acked-by: Wenyou Yang <wenyouya@gmail.com>
(cherry picked from commit 7b0947787358c6b277431d6b76ce043d8bec641d)
Change-Id: Ifa87682ea641368d73be6a059c00d194a668bf4b
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Change-Id: Ia9f6139d87f28ef8bbab5effb15b3e00e53e732d
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit fbca0e66cc982325d8031094736d79ed007e42e2)
Change-Id: I70b43d668f905f236e18493c07ac6c369b7ca2d1
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit 4a942f49b891872727aa0bdba58e2ca513fc455c)
Change-Id: Ib34e1271ed6dd812bfb21bc2162b30d27b014498
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit 2c4b096b4c3e9d115b43edb23b1592a297076ae4)
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
(cherry picked from commit bbdf38698ee5c96138868d563c6825cd48bb26dc
Change-Id: I6c99c0696716c148a9f8a3255111b23749c78a6b
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
Change-Id: Id2769d0405f96348de67cdd24df8a82a35101637
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit 7b819b569e92fd9b9b1baf160cd946a523fde1ce)
Change-Id: I51b0a222d7f5d4bf8925f7544c50d8f35da235e2
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit a5dfabea19f961826509118513f833cea25797bb)
Change-Id: I66c533e5c556c26b771037bc7eee5ceff01f5cb9
Signed-off-by: Tuomas Tynkkynen <tuomas@tuxera.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit 95d3877a5818cc3f149a9d443637ff145bbaaabb)
0efc024 ("spi_flash: Add spi_flash_probe_fdt() to locate SPI by FDT
node") added a helper function spi_base_setup_slave_fdt to to set up a
SPI slave from a given FDT blob. The only user was the exynos SPI
driver.
But commit 73186c9 ("dm: exynos: Convert SPI to driver model") removed
the use of this function, hence rendering it obsolete.
Remove this function, as well as the CONFIG_OF_SPI option, which guarded
only this function.
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jagan Teki <jagan@openedev.com>
Change-Id: I2a5bd866fda6d65b908c1f71160da59ab5332a15
Signed-off-by: Mario Six <mario.six@gdsys.cc>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit c5b88f29ba46997e1cae39153980cae475b87b82)
This converts the following to Kconfig:
CONFIG_DAVINCI_SPI
Signed-off-by: Adam Ford <aford173@gmail.com>
(cherry picked from commit 26410c1517bbb6d6f90de55b5fa65dac3c298bc7)
Change-Id: I7b2166d5ea20dcd0a0e79d6faa1c51fca4d6eef9
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
This commit converts the following items to Kconfig:
CONFIG_ATMEL_NAND_HWECC
CONFIG_ATMEL_NAND_HW_PMECC
CONFIG_PMECC_CAP
CONFIG_PMECC_SECTOR_SIZE
CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
[PMECC References]
https://www.at91.com/linux4sam/bin/view/Linux4SAM/PmeccConfigurehttps://www.at91.com/linux4sam/bin/view/Linux4SAM/AT91Bootstrap
[Mailing List Thread]
https://lists.denx.de/pipermail/u-boot/2018-December/350666.html
Fixes: 5541543f ("configs: at91: Remove CONFIG_SYS_EXTRA_OPTIONS assignment")
[trini: Make the migration be size neutral and possibly not fix the
above in all cases]
Reported-by: Daniel Evans <photonthunder@gmail.com>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Derald D. Woods <woods.technical@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Change-Id: I00f123659dcb281b50cd4720901343e039e802c1
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit a 49ad40298cc5639436c6d490b699ecb60895ba2d）
This converts the following to Kconfig:
CONFIG_MTD_PARTITIONS
CONFIG_MTD_DEVICE
Signed-off-by: Adam Ford <aford173@gmail.com>
Change-Id: I90c45c7716965009c00d18a19f5491f19b1ab8b3
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit 9c5b00973bceb7c0192bd6b03672d69b092700b4)
This converts the following to Kconfig:
CONFIG_NAND_DAVINCI
Signed-off-by: Adam Ford <aford173@gmail.com>
Change-Id: I3d95031ee5ebaa5e8ac6c03236622089ccf3caee
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit eba7f1ff6c9836931f0ce2812182190862e38b5f)
This converts the following to Kconfig:
CONFIG_NAND_ATMEL
Signed-off-by: Adam Ford <aford173@gmail.com>
Change-Id: Ic71bd0ef5704faf04852bf51d265d94e1a8dc259
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit e7db856bf96213ba3f6b716be9fa264e184f74e2)
This converts the following to Kconfig:
CONFIG_NAND_LPC32XX_SLC
Change-Id: Ib4d42bc173665d6483af8c1007006dd0422d5a86
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit d294335e5d51aa83b6dd57db85c3251e9a92349e)
Add the config option `CONFIG_SPL_NAND_IDENT` for using the NAND chip ID list
to identify the NAND flash in SPL.
Change-Id: I4d83cb678cb52e83ddf755c0188a4f2f42fe5671
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit 15e207faa0c32b587c173844936cadd7bf8dee01)
Change-Id: I0ba60a6d86cd7f4777f91027fc9da3f4db855114
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit c0ce4ceaba03fa6ddf738628344025c44fc78dd4)
ppc4xx support was removed some time ago. Lets remove the now unused
NAND driver and all its references for this platform as well.
Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Scott Wood <oss@buserror.net>
Change-Id: I18d36aa6b1529d608acb7d39f886c3b45a791c22
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit ec9c80d643a3e5ff35c5d24d675cb1feaa440c9d)
This converts the following to Kconfig:
CONFIG_APBH_DMA
CONFIG_APBH_DMA_BURST
CONFIG_APBH_DMA_BURST8
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Stefan Agner <stefan.agner@toradex.com>
[trini: Add in MMC as well]
Change-Id: I45b919ab747aa414ba23f1e165c11dd8aff44c44
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit 99bec1aead5927c54f4364bfe10823a86fe0dad2)
This converts the following to Kconfig:
CONFIG_NAND_MXC
CONFIG_NAND_OMAP_GPMC
CONFIG_NAND_OMAP_GPMC_PREFETCH
CONFIG_NAND_OMAP_ELM
CONFIG_SPL_NAND_AM33XX_BCH
CONFIG_SPL_NAND_SIMPLE
CONFIG_SYS_NAND_BUSWIDTH_16BIT
Change-Id: Ic2238bb7ba18d9ae37dfef7ac7593fd42e34ef7d
Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
[trini: Finish migration of CONFIG_SPL_NAND_SIMPLE, fix some build issues,
add CONFIG_NAND_MXC so we can do CONFIG_SYS_NAND_BUSWIDTH_16BIT]
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit 0a9ef45158d586017839d4b6fccd7f8f16672156)
u-boot-tpl.sym and u-boot-spl.sym are required by stacktrace scripts
Change-Id: Ie408332eaff71c3ed244016adb9f75401ca35845
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Without this patch, u-boot-tpl.dtb is always copy from u-boot-spl.dtb which
doesn't apply fdtgrep with "-b u-boot,dm-tpl".
Sometimes, the platform with critical sram size requires u-boot-tpl.dtb as
smaller as possible, so we use "u-boot,dm-tpl" prop to idendify what the
tpl really needs.
Rules:
"u-boot,dm-tpl": include node with prop for u-boot-tpl.dtb;
"u-boot,dm-spl": include node with prop for u-boot-spl.dtb;
"u-boot,pre-reloc": include node with prop for u-boot-tpl.dtb and u-boot-spl.dtb;
Change-Id: I29c2464d285174f4d0a4a1f8b91a84238ed82384
Signed-off-by: Joseph Chen <chenjh@rock-chips.com>
Some devices cann't use SPL framework at TPL stage, but the
CONFIG_SPL_FRAMEWORK is still defined at TPL stage, so need
to separate them with CONFIG_TINY_TPL.
If the SPL framewrok was used both at TPL and SPL stage,
CONFIG_TINY_TPL is not defined.
If the SPL framewrok was used at SPL stage, but not use at
TPL, need to define CONFIG_TINY_TPL.
Change-Id: Iabb7e0377ee00311ca468cb8ff7544c96bd999d6
Signed-off-by: David Wu <david.wu@rock-chips.com>
Building spl with CONFIG_OF_EMBED enabled results in an error message
on my board: "SPL image too big". This is because the fdtgrep build
step is only executed for CONFIG_OF_SEPARATE.
Fix this by moving the fdtgrep build step ('cmd_fdtgreo') from
scripts/Makefile.spl to dts/Makefile so that the reduced dtb is
available for all kinds of spl builds.
The resulting variable name for the embedded device tree blob changes,
too, which is why common.h and fdtdec.c have tiny changes.
Change-Id: I2bf2d9780a544ac602752527d17f14aa6b12c5a2
Signed-off-by: Simon Goldschmidt <sgoldschmidt@de.pepperl-fuchs.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
This does not appear to be used by any boards. Before introducing a new
log system, remove this old one.
Change-Id: I798cd4aff50b7136ae9f84362185f9f73b04f710
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Kever Yang <kever.yang@rock-chips.com>
(cherry picked from commit c5404b64fb5a35d41f7eff6d12b8ffdb0c851040)
Vignesh Raghavendra
Marcel Ziswiler
Jagan Teki
Jean-Jacques Hiblot
Michal Simek
Maxime Ripard
Joseph Chen
Adam Ford
Tom Rini
Tuomas Tynkkynen
Mario Six
Derald D. Woods
Jörg Krause
Petr Vorel
Stefan Roese
YouMin Chen
David Wu
Goldschmidt Simon
Simon Glass