rv1126-uboot/drivers
Eric Anholt cd0fa5bff8 serial: pl01x: Add support for devices with the rate pre-configured.
For Raspberry Pi, we had the input clock rate to the pl011 fixed in
the rpi.c file, but it may be changed by firmware due to user changes
to config.txt.  Since the firmware always sets up the uart (default
115200 output unless the user changes it), we can just skip our own
uart init to simplify the boot process and more reliably get serial
output.

Signed-off-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
2016-03-22 12:16:12 -04:00
..
adc
bios_emulator
block dm: sandbox: Drop the pre-DM host implementation 2016-03-17 21:27:39 -06:00
bootcount
clk clk: uniphier: add Media I/O clock driver for UniPhier SoCs 2016-02-14 16:36:13 +09:00
core syscon: Avoid returning a device on failure 2016-03-17 10:27:24 +08:00
cpu
crypto drivers/crypto/fsl: define structures for PDB 2016-03-21 12:42:11 -07:00
ddr driver/ddr/fsl: Add workaround for erratum A-009803 2016-03-21 12:42:13 -07:00
demo
dfu dm: part: Rename some partition functions 2016-03-14 15:34:50 -06:00
dma drivers: dma: ti-edma3: convert driver to adopt driver model 2016-02-23 16:14:46 +05:30
fpga Revert "arm: socfpga: set the fpga global bit to disable HPS to FPGA signals" 2016-02-04 12:43:21 +01:00
gpio x86: broadwell: Add a GPIO driver 2016-03-17 10:27:26 +08:00
hwmon
i2c
input input: i8042: Make sure the keyboard is enabled 2016-03-17 10:27:24 +08:00
led
memory
misc Merge git://git.denx.de/u-boot-dm 2016-03-14 19:21:44 -04:00
mmc dwmmc: Increase retry timeout 2016-03-15 15:13:05 -04:00
mtd sf: Correct data types in stm_is_locked_sr() 2016-03-12 19:55:42 +05:30
net driver: net: fsl-mc: Return from DPAA_exit if boot_status !=0 2016-03-21 12:42:15 -07:00
pch x86: pch9: Implement get_io_base op 2016-02-05 12:47:21 +08:00
pci pci/layerscape: set LUT and msi-map for discovered PCI devices 2016-03-21 12:42:13 -07:00
pcmcia
pinctrl pinctrl: uniphier: guard uniphier directory with CONFIG_PINCTRL_UNIPHIER 2016-03-09 01:11:04 +09:00
power power: twl6030: Power off support 2016-03-15 15:12:56 -04:00
pwm tegra: video: Move LCD driver to use the DM PWM driver 2016-02-16 09:17:53 -07:00
qe board: ls1043ardb: Add micro QE support for ls1043ardb 2016-02-24 08:51:14 -08:00
ram
remoteproc remoteproc: Add support for TI power processor 2016-03-14 19:18:37 -04:00
rtc
serial serial: pl01x: Add support for devices with the rate pre-configured. 2016-03-22 12:16:12 -04:00
soc Use correct spelling of "U-Boot" 2016-02-06 12:00:59 +01:00
sound
spi spi: omap3: Fix multiple definition of 'priv' 2016-03-15 14:50:09 -04:00
thermal
timer Merge git://git.denx.de/u-boot-dm 2016-03-14 19:21:44 -04:00
tpm tpm: st33zp24: Add tpm st33zp24 spi support 2016-01-28 21:01:22 -07:00
twserial
usb usb: xhci: Fix vendor command error if the request type is USB_REQ_SET_ADDRESS or USB_REQ_SET_CONFIGURATION. 2016-03-20 18:00:45 +01:00
video x86: broadwell: Add video support 2016-03-17 10:27:26 +08:00
watchdog
Kconfig
Makefile drivers: ddr: Add DDR2 SDRAM controller driver for Microchip PIC32. 2016-02-01 22:14:01 +01:00