rv1126-uboot/drivers/net
J. German Rivera 7b3bd9a798 drivers/mc: Migrated MC Flibs to 0.5.2
Upgrade Manage Complex (MC) flib API to 0.5.2. Rename directory
fsl_mc to fsl-mc. Change the fsl-mc node in Linux device tree
from "fsl,dprcr" to "fsl-mc". Print MC version info when
appropriate.

Signed-off-by: J. German Rivera <German.Rivera@freescale.com>
Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>
2015-02-24 13:10:20 -08:00
..
fm net/fm: Enable FMAN ports if l2switch ports are connected over SGMII 2015-01-16 09:32:32 -08:00
fsl-mc drivers/mc: Migrated MC Flibs to 0.5.2 2015-02-24 13:10:20 -08:00
phy net: phy: micrel: add support for KSZ8895 switch in SMI mode 2015-01-30 15:55:00 -06:00
4xx_enet.c
8390.h
Kconfig
Makefile drivers/mc: Migrated MC Flibs to 0.5.2 2015-02-24 13:10:20 -08:00
altera_tse.c
altera_tse.h
armada100_fec.c
armada100_fec.h
at91_emac.c
ax88180.c
ax88180.h
ax88796.c
ax88796.h
bcm-sf2-eth-gmac.c
bcm-sf2-eth-gmac.h
bcm-sf2-eth.c
bcm-sf2-eth.h
bfin_mac.c
bfin_mac.h
calxedaxgmac.c
cpsw.c
cs8900.c
cs8900.h
davinci_emac.c
davinci_emac.h
dc2114x.c
designware.c net/designware: add error message on DMA reset timeout 2015-01-30 15:55:00 -06:00
designware.h
dm9000x.c
dm9000x.h
dnet.c
dnet.h
e1000.c drivers/net/e1000.c: fix compile warning under 64bit mode 2015-01-30 09:19:16 -05:00
e1000.h
e1000_spi.c
eepro100.c
enc28j60.c
enc28j60.h
ep93xx_eth.c
ep93xx_eth.h
ethoc.c
fec_mxc.c
fec_mxc.h
fsl_mcdmafec.c
fsl_mdio.c
ftgmac100.c
ftgmac100.h
ftmac100.c
ftmac100.h
ftmac110.c
ftmac110.h
greth.c
greth.h
keystone_net.c net: keystone_net: move serdes setup to initialization function 2015-02-16 12:41:41 -05:00
ks8695eth.c
ks8851_mll.c
ks8851_mll.h
lan91c96.c
lan91c96.h
macb.c net: macb: enable GMAC IP without GE feature support 2014-11-17 08:47:18 -05:00
macb.h
mcffec.c
mcfmii.c
mpc5xxx_fec.c powerpc: mpc5xxx: remove Total5200 board support 2015-01-23 16:53:52 -05:00
mpc5xxx_fec.h
mpc512x_fec.c
mpc512x_fec.h
mvgbe.c kirkwood: define empty CONFIG_MVGBE_PORTS by default 2015-01-25 23:56:15 +01:00
mvgbe.h
mvneta.c
natsemi.c
ne2000.c
ne2000.h
ne2000_base.c
ne2000_base.h
netconsole.c linux/kernel.h: sync min, max, min3, max3 macros with Linux 2014-11-23 06:48:30 -05:00
ns8382x.c
pcnet.c
rtl8139.c
rtl8169.c net: rtl8169: Add support for RTL-8168/8111g 2014-12-18 13:21:41 -07:00
sh_eth.c
sh_eth.h
smc911x.c net: smc911x: Keep MAC programmed 2014-11-07 16:27:04 -05:00
smc911x.h
smc91111.c
smc91111.h Add MS7206SE ethernet support 2015-01-30 15:55:00 -06:00
sunxi_emac.c
tsec.c net: tsec: Fix NULL access in case init_phy() fails 2015-01-30 15:55:00 -06:00
tsi108_eth.c
uli526x.c drivers/net/uli526x.c: fix syntax error 2014-11-07 16:27:07 -05:00
vsc7385.c
vsc9953.c net/vsc9953: Add driver for Vitesse VSC9953 L2 Switch IP 2015-01-16 09:32:38 -08:00
xilinx_axi_emac.c
xilinx_emaclite.c
xilinx_ll_temac.c net: ll_temac: Fix compilation warning because of phys_addr_t 2015-01-21 10:30:36 +01:00
xilinx_ll_temac.h
xilinx_ll_temac_fifo.c
xilinx_ll_temac_fifo.h
xilinx_ll_temac_mdio.c
xilinx_ll_temac_mdio.h
xilinx_ll_temac_sdma.c
xilinx_ll_temac_sdma.h
zynq_gem.c net: gem: Use phys_addr_t instead of int for addresses 2015-01-21 10:30:21 +01:00