David Wu 61ab4d721f power: io-domain: Don't printf sudev->name when get regulator failed ... This patch fixed the following issue: Stack: [< 00295020 >] strnlen+0x10/0x28 [< 002965b4 >] vsnprintf_internal+0x61c/0xa84 [< 00296a6c >] vscnprintf+0x50/0x74 [< 00296c58 >] printf+0x94/0xb4 [< 00263e04 >] rockchip_iodomain_probe+0xcc/0x19c [< 0022e310 >] device_probe+0x21c/0x268 [< 0022f3e8 >] uclass_get_device_tail+0x1c/0x40 [< 0022f6dc >] uclass_first_device+0x30/0x44 [< 00263cdc >] io_domain_init+0x2c/0x50 [< 00202da8 >] board_init+0xb4/0xc4 [< 0027a480 >] initcall_run_list+0x58/0x94 [< 00214fbc >] board_init_r+0x20/0x24 [< 00201b24 >] relocation_return+0x4/0x0 Change-Id: I1afc2613a1dba32e7f9c6ad2165e80853d421187 Signed-off-by: David Wu <david.wu@rock-chips.com>		2019-11-27 11:30:07 +08:00
..
battery	…
charge	power: charge: add bq25700 support	2019-05-23 11:59:52 +08:00
domain	…
dvfs	dm: dvfs: don't print fail message when there is no device	2019-03-27 08:59:47 +08:00
fuel_gauge	dm: fuel gauge: rename fuel_gauge_get_soc() to fuel_gauge_update_get_soc()	2019-08-09 18:11:23 +08:00
io-domain	power: io-domain: Don't printf sudev->name when get regulator failed	2019-11-27 11:30:07 +08:00
mfd	…
pmic	pmic: rk8xx: default disable virq chip by new interface	2019-10-23 11:25:02 +08:00
regulator	regulator: pwm: remove init voltage setting	2019-11-19 14:25:46 +08:00
Kconfig	power: charge: add bq25700 support	2019-05-23 11:59:52 +08:00
Makefile	…
axp152.c	…
axp209.c	…
axp221.c	…
axp809.c	…
axp818.c	…
charge-display-uclass.c	power: charge animation: fix cmd compile error	2019-04-30 11:38:48 +08:00
charge_animation.c	power: charge animation: call irq suspend/resume before simple wfi	2019-08-09 18:11:40 +08:00
exynos-tmu.c	…
ftpmu010.c	…
palmas.c	…
power_core.c	…
power_dialog.c	…
power_fsl.c	…
power_i2c.c	…
power_spi.c	…
rockchip_pm.c	…
sy8106a.c	…
tps6586x.c	…
twl4030.c	…
twl6030.c	…